Questions? Call us at (262) 218-2915

Sign Regulations in Clinton, Connecticut

Clinton, Connecticut has specific sign regulations covering 30 sign types across 10 zoning districts. Regulated sign types include Freestanding Sign, Temporary Sign (Construction), Temporary Sign (Real Estate). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: August 25, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Clinton, Connecticut

Sample Sign Requirements in Clinton

Sign TypeMax HeightMax AreaSetback
Directional Sign (As-of-Right)4 ft.3 sq. ft.Not listed
Identification Sign (As-of-Right)Not listed3 sq. ft.Not listed
House Identification Signs (As-of-Right)Not listed3 sq. ft.Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for ClintonFull Coverage

Sign Types Covered

30

  • Freestanding Sign
  • Temporary Sign (Construction)
  • Temporary Sign (Real Estate)
  • Individual Store Exterior Sign (Wall Sign)
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Clinton

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Clinton, the height limit for Freestanding Sign in the Non-Residential Zones (VZ, EMVD, IDZ, B-1, B-2, B-3, B-4, M, I-1, I-2, IP) is 20 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Clinton require a permit. From the submission notes on this page: For Pylon Signs in a Commercial Center, the design plan must specify the number of individual panels and the square footage of each panel. The operator must demonstrate that the signage pattern is consistent with the overall design of the Commercial Center. Run a code check for an exact address to see the permit requirements for that zone.

Clinton's sign code covers 30 sign types, including Freestanding Sign, Temporary Sign (Construction), Temporary Sign (Real Estate), and Individual Store Exterior Sign (Wall Sign). Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Temporary signs of four square feet (4 sq. ft.) or less do not require a zoning permit, unless otherwise indicated. The full list is on this page.

In Clinton, Freestanding Sign in the Residential Zones (R-80, R-60, R-40, R-30, R-20, R-15, R-10) must be set back 10 ft from street/lot line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Clinton's sign code lists Neon/LED Sign as a sign type, but this page doesn't quote the code's rules for digital or LED signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Clinton Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Clinton, Connecticut, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Clinton, Connecticut Sign Rules at a Glance

Clinton, Connecticut regulates 30 sign types across 10 zoning districts. Freestanding Signs in the Residential Zones (R-80, R-60, R-40, R-30, R-20, R-15, R-10) are capped at 5 ft tall and 16 sq ft, set back 10 ft from street/lot line. Most commercial signs in Clinton require a permit.

Detailed Sign Ordinance Requirements for Clinton, Connecticut

Sign Rules by Zoning District in Clinton (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones64 ft.20 sq. ft.Not listed
Residential Zones (R-80, R-60, R-40, R-30, R-20, R-15, R-10)75 ft.16 sq. ft.Not listed
Non-Residential Zones (VZ, EMVD, IDZ, B-1, B-2, B-3, B-4, M, I-1, I-2, IP)920 ft.Aggregate total area: 48 sq. ft. (B-1, B-4, Industrial), 36 sq. ft. (VZ, B-2, B-3, Marine)Not listed
Village Zone (VZ), Village Zone District, Village District420 ft.Aggregate 36 sq. ft.Not listed
Marine District (M)420 ft.Aggregate 36 sq. ft.Not listed
Interchange District Zone (IDZ)150 ft. (inc. base)Not listedNot listed
Shopping Center420 ft.36 sq. ft. plus up to 4 sq. ft. for each unit; max 84 sq. ft. totalNot listed
Commercial Center550 ft. (inc. base)36 sq. ft. per sign, tenant signs up to 60 sq. ft. each, total max directory sign area including tenant signs 44 sq. ft.Not listed
Multiple Tenancy Commercial Buildings320 ft.36 sq. ft.; tenant signs ≤ 4 sq. ft. each; total directory sign area (incl. tenant signs) ≤ 72 sq. ft.Not listed
Multiple Building Complexes420 ft.36 sq. ft.; tenant signs included, total area including freestanding signs ≤ 72 sq. ft.Not listed

Zone-by-Zone Sign Requirements in Clinton(sample of 3 of 10 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Directional Sign (As-of-Right)4 ft.3 sq. ft.Not listedNot listedNo more than two off-premises directional signsDriveway locations or other ingress/egress areas on premisesNot listedUnlock34.7.2
Identification Sign (As-of-Right)Not listed3 sq. ft.Not listedNot listedNot listedAffixed to non-commercial building, monument, tablet, etc.Not listedUnlock34.7.4
House Identification Signs (As-of-Right)Not listed3 sq. ft.Not listedNot listedNo more than twoOn houseNot listedUnlock34.7.6
Temporary Sign (General)Not listed4 sq. ft. or less without permit; up to 48 sq. ft. max with permitNot listedNot listedOne per event; no more than 2 events per calendar year except municipally owned properties (up to two signs at time)Not listedNot listedUnlock34.8
Political SignNot listed20 sq. ft.Not listedNot listedNot listedConfined within private propertyNot listedUnlock34.8.4
Subdivision Sign (Temporary)Not listed20 sq. ft.Not listedNot listedOne per subdivisionAt entrance to subdivisionNot listedUnlock34.8.3

Residential Zones (R-80, R-60, R-40, R-30, R-20, R-15, R-10)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign5 ft.16 sq. ft.Not listed10 ft. from street/lot lineOne per qualifying useSet back at least 10 ft. from any street or lot lineNot listedUnlock34.5.2 (a), (b), (c)(1), (d)
Freestanding Sign (General Residential Use)5 ft.2 sq. ft.Not listed10 ft. from street/lot lineNo more than oneSet back at least 10 ft. from any street or lot lineNot listedUnlock34.5.2 (a), (c)(2), (d)
Freestanding Sign (Tier 1 Home Business)5 ft.5 sq. ft.Not listed10 ft. from street/lot lineOneSet back at least 10 ft. from any street or lot lineNot listedUnlock34.5.2 (c)(3)
Freestanding Sign (Tier 2 or 3 Home Business)5 ft.8 sq. ft.Not listed10 ft. from street/lot lineOneSet back at least 10 ft. from any street or lot lineNot listedUnlock34.5.2 (c)(4)
Hanging Sign (Projecting Over Pedestrian Way)Not listedNot listedNot listedNot listedNot listedProjecting over pedestrian wayNot listedUnlock34.5.2 (b)(2)
Temporary Sign (Construction)Not listed6 sq. ft.Not listedNot listedNot listedOn construction siteNot listedUnlock34.8.1
Temporary Sign (Real Estate)Not listed6 sq. ft.Not listedNot listedMax twoOn lot being advertisedNot listedUnlock34.8.2

Non-Residential Zones (VZ, EMVD, IDZ, B-1, B-2, B-3, B-4, M, I-1, I-2, IP)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign20 ft.Aggregate total area: 48 sq. ft. (B-1, B-4, Industrial), 36 sq. ft. (VZ, B-2, B-3, Marine)Not listedMeets building setbacks except as specifiedNot listedSetbacks required for buildings unless stated otherwiseNot listedUnlock34.5.1 (a)(1), (b)(1), (c)(1-2), (d)(3)
Hanging Sign (B-1, B-4, Industrial Districts)Not listedNot listedNo single dimension > 8 ft.May extend to within 10 ft. of front lot lineOneMay extend to within 10 ft. of front lot lineNot listedUnlock34.5.1 (a)(1)
Hanging Sign (VZ, B-2, B-3, Marine Districts)Not listed18 sq. ft.Not listedMay extend to within 10 ft. of front lot lineOneMay extend to within 10 ft. of front lot lineNot listedUnlock34.5.1 (a)(2)
Arcade SignNot listed4 sq. ft.Not listedNot listedOne per store frontPerpendicular to store front below roof/walkway coveringNot listedUnlock34.5.1 (a)(3)
Neon/LED SignNot listedEach ≤ 6 sq. ft.; max 3 per lot; aggregate ≤ 15 sq. ft.; max dimension ≤ 42 in.42 in. maxNot listedMax three per lotInside windows only in permitted districtsNot listedUnlock34.5.1 (a)(5),(c)(4),(d)(2)
Sandwich Board SignNot listed6 sq. ft.Not listedNot listedOne per propertyOn private propertyNot listedUnlock34.8.6
Temporary Sign (Construction)Not listedB-1, B-4, I-1, I-2: 48 sq. ft.; B-2, B-3, Marine, VZ: 36 sq. ft.Not listedNot listedNot listedOn construction siteNot listedUnlock34.8.1
Temporary Sign (Real Estate)Not listedB-1, B-4, I-1, I-2: 48 sq. ft.; B-2, B-3, Marine, VZ: 36 sq. ft.Not listedNot listedMax two per lotOn lot being advertisedNot listedUnlock34.8.2

PermitPal covers all 10 zoning districts in Clinton. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Clinton

  • No sign in any district shall have an area greater than forty-eight square feet (48 sq. ft.) unless otherwise specified.
  • No sign shall be attached to a tree, fence or utility pole or painted or drawn on a rock or other natural feature, except that temporary signs may be attached to fences located on municipal properties.
  • No sign shall be located within any town or state right-of-way, except for town or state-owned signs.
  • No sign, together with any supporting framework, shall extend to a height above the maximum building height allowed in any district nor shall a sign project beyond any property line.
  • No portion of any sign attached to an accessory building shall be permitted within required setback areas.
  • No sign shall be located on any roof, and no sign attached to or painted on a building shall extend beyond the limits of the wall of the building to which it is attached or on which it is painted.
  • No sign shall be permitted which has blinking, flashing, fluttering, oscillating, rotating or pulsating lights or other illumination devices which have a changing light intensity or color. (Signs giving public service information such as time, date or temperature may be permitted provided that they meet all other provisions. Emergency lights are excluded.)
  • No “feather” or “swooper” flags shall be permitted.
  • No sign, except for a traffic, regulatory or informational sign, shall contain the words “STOP”, “GO SLOW”, “CAUTION”, “DANGER” OR “WARNING”, or incorporate red, amber or green lights resembling traffic signals or resemble “STOP” or “YIELD” signs in shape and color.
  • No sign which has any moving parts or assumes any motion, including hanging signs, shall be permitted.
  • No vehicle or trailer which has attached thereto or located thereon any sign or advertising device for the basic purpose of providing advertisement of products or directing people to a business or activity, shall be parked on the public right-of-way or any other location which is clearly for the purpose of public visibility. (This does not prohibit vehicle signage used for business identity, such as bus or motor vehicle lettering.)

Exempt Signs in Clinton

  • Public signs of a non-commercial nature and in the public interest, erected by or on the order of a public officer in the performance of a public duty (e.g., traffic signs, safety signs, memorial plaques, signs of a historic nature).
  • Private directional signs solely indicating ingress and egress, not exceeding three square feet (3 sq. ft.) in area nor four feet (4’) in height, placed at driveways or other premises locations. No more than two permanent unlighted off-premises directional signs are allowed with property owner permission and without creating a nuisance/hazard.
  • Signs related to hunting, fishing, trespassing, dumping or loitering, not exceeding two square feet (2 sq. ft.) in area.
  • Signs identifying names of non-commercial buildings, dates of erection, monuments, commemorative tablets, and the like, when carved into stone, concrete or similar material or made of bronze, aluminum or other permanent type construction, and permanently affixed to the structure, not exceeding three square feet (3 sq. ft.) in area.
  • Decorative signs of a primarily decorative nature, clearly customary, displayed for not more than sixty (60) days in any one year and set back at least ten feet (10’) from all boundary lines of the lot.
  • No more than two house identification signs, neither exceeding three square feet (3 sq. ft.) in area, identifying the occupant of the house.
  • Temporary signs of four square feet (4 sq. ft.) or less do not require a zoning permit, unless otherwise indicated.
  • Real estate signs six square feet (6 sq. ft.) or less do not require a permit.

Sign Plan & Submission Notes for Clinton

  • Properties in non-residential zones with more than one use or tenant (e.g., Shopping Center, Multiple Tenancy Commercial Buildings, Multiple Building Complexes, Commercial Center) must have an overall Sign Design Plan approved prior to the erection or installation of any signs. The plan must address sign design, uniformity, color, lighting, and other standards as specified.
  • For Pylon Signs in a Commercial Center, the design plan must specify the number of individual panels and the square footage of each panel. The operator must demonstrate that the signage pattern is consistent with the overall design of the Commercial Center.
  • The Commission has the right to impose additional standards regarding size, height, location, and materials of any sign in connection with granting approval under this section, as may be necessary to promote health, safety, and general welfare.

Source: other municipal code