Sign Regulations in Washington, Connecticut

Washington, Connecticut has specific sign regulations covering 17 sign types across 3 zoning districts. Regulated sign types include All Signs, Temporary Off-Premises Directional Sign, Temporary Sign (General). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 9, 2025

Sign Regulation Overview for Washington, Connecticut

Sample Sign Requirements in Washington

Sign TypeMax HeightMax AreaSetback
All SignsNo part of any sign shall project more than 12 feet above the ground surface.
Temporary Off-Premises Directional Sign4 square feet
Political, Tag Sale, or Nonprofit Fundraising Event Sign (Temporary)10 feet from side property lines

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for WashingtonFull Coverage

Sign Types Covered

17

  • All Signs
  • Temporary Off-Premises Directional Sign
  • Temporary Sign (General)
  • Political, Tag Sale, or Nonprofit Fundraising Event Sign (Temporary)
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Washington

Frequently Asked Questions

Sign height limits in Washington vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Washington, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Washington, regulated sign types include All Signs, Temporary Off-Premises Directional Sign, Temporary Sign (General), Political, Tag Sale, or Nonprofit Fundraising Event Sign (Temporary), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Washington vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Washington are regulated with specific requirements for brightness, animation, and message duration. Washington has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Washington Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Washington, Connecticut sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Washington, Connecticut Sign Rules at a Glance

Washington, Connecticut regulates 17 sign types across 3 zoning districts. Permanent Directory Sign for Business Complexs in the Business Districts, B-1, B-2, B-3, B-4 zoning district are capped at Total height determined by sum of directory sign sections tall, 8 feet wide (overall sign); complex ID part max 2 feet high; individual business IDs max 1 foot high each, and 8 feet (overall sign) wide (Sec. 16.5.5). Most commercial signs in Washington require a permit.

Detailed Sign Ordinance Requirements for Washington, Connecticut

Sign Rules by Zoning District in Washington (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones6No part of any sign shall project more than 12 feet above the ground surface.4 square feet
Residential Districts34 square feet
Business Districts, B-1, B-2, B-3, B-4845 inches16 square feet (may be double-faced)

Zone-by-Zone Sign Requirements in Washington

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
All SignsNo part of any sign shall project more than 12 feet above the ground surface.UnlockSections 16.1, 16.2, 16.3
Temporary Off-Premises Directional Sign4 square feet2 maximumOff-premises; maximum two per use; not on the same lot or elsewhere in town more than 30 consecutive days or 60 total days in one 12-month period.Unlock16.3.2
Temporary Sign (General)Unlock16.3.8
Political, Tag Sale, or Nonprofit Fundraising Event Sign (Temporary)10 feet from side property linesUnlock16.3.10
Permanent Off-Premises Directional Sign (Town Landmark Site)2 square feet1 (2 with Commission approval)Off-premises; only for Town Landmark Sites not on main highways and/or without frontage.Unlock16.3.11
Temporary Sign by Public Utilities for Traffic ControlUnlock16.3.9

Residential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Identification Sign (Special Permit Uses)4 square feet1 per useOn premises of approved Special Permit uses (inn, public dump, cemetery, convalescent home, municipal facility, church, school, library, museum, club, landmark site).Unlock16.4.1
Permanent Sign (Non-business Use)2 square feet1 per lotOn premisesUnlock16.4.2
Temporary Contractor/For Sale or Lease Sign4 square feet10 feet from any side property line1 per lotOn premisesUnlock16.4.3

Business Districts, B-1, B-2, B-3, B-4

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign16 square feet (may be double-faced)10 feet from any side property lineOn premises; not closer than 10 feet from any side property line.Unlock16.5.2
Wall SignOn wall/building.Unlock16.5.3
Business Sign (Aggregate Maximum)Max 2 permanent signs, plus one portable sign during business hoursOn premises, wall or freestanding.Unlock16.5.4
Permanent Sign for Individual Businesses in Business Complex12 square feet1 per businessAttached to or projecting from the building.Unlock16.5.5
Permanent Directory Sign for Business ComplexTotal height determined by sum of directory sign sections8 feet wide (overall sign); complex ID part max 2 feet high; individual business IDs max 1 foot high each8 feet (overall sign)1 directory sign per complexOn premisesUnlock16.5.5
Temporary Sign (Sales/Special Features on Door, Window, or Wall)Door, window, or wall.Unlock16.5.6
Permanent Off-Premises Directional Sign (Business Use)2 square feet1 (2 at Commission discretion)Off premises, only for businesses without main highway or street frontage (typically B-1, B-2, B-3, B-4)Unlock16.5.7
Portable Sign (Sandwich Board Sign, Flag Sign, or Similar)45 inches30 inches (for sandwich board); flag may be 3 feet wide and 5 feet long on mast not to exceed 8 feet in length10 feet from any side boundary line1 per business permitOn property of permitted business, not in right-of-way, not closer than 10 feet from any side boundary.Unlock16.5.8

Illumination rules, size formulas, and permit requirements for every sign type in Washington are available with a free PermitPal account.

Start free

Prohibited Signs in Washington

  • Any sign not expressly permitted is prohibited.
  • No sign or its illuminator shall, because of its size, shape, or method of illumination, be permitted to confuse or obstruct the view or effectiveness of any traffic sign or signal or in any way result in a hazard to the safe and efficient flow of vehicular traffic.
  • No sign shall advertise a product, service, or activity other than that which is produced, provided, or conducted on the premises, except as provided for off-premises temporary directional signs.
  • No sign shall be equipped with flashing lights or moving parts.
  • The lamp (bulb) or other light source of an illuminated sign shall be shielded and positioned so as not to be visible beyond the premises or on any right of way; illumination must be from fixtures installed at the top and directed downward; no illumination from fixtures installed anywhere except on the sign.
  • No sign may be illuminated after 11:00 p.m. or more than thirty minutes after the closing of the business served, whichever is later.
  • The light source of an illuminated sign shall be shaded so as not to be viewed from off the premises.
  • No sign may be back lit or internally illuminated, including vending machines.
  • No part of any sign shall project more than 12 feet above the ground surface.
  • Failure to maintain signs shall be considered a violation.
  • Upon discontinuance of a use, the property owner must eliminate all signs pertaining to the use within 30 days after such discontinuance.

Exempt Signs in Washington

  • Signs not larger than 2 square feet shown on an approved site plan by the Commission do not require further Zoning Commission or Zoning Enforcement Officer approval.
  • Signs intended for the health, safety, and welfare of the public erected by the State of Connecticut or the Town of Washington or to comply with state statutes are not prohibited.
  • Temporary signs by public utilities for traffic control are allowed without permits.
  • Political signs, tag sale signs, and signs advertising fund raising events for non profit organizations (such as churches, schools, libraries, Scouts, the Grange, the Fire Department, etc.) are permitted without a Zoning permit for a 2-week period.

Sign Plan & Submission Notes for Washington

  • All signs larger than 2 square feet, except those shown on a site plan of a use approved by the Commission, shall require approval of the Zoning Commission or Zoning Enforcement Officer.
  • Applications for permits must be made on forms available in the Land Use Office.
  • Applications for certain off-premises signs (e.g., permanent directional signs) must include a sketch plan drawn to scale to verify sight line or traffic safety.

Source: municode municipal code