Questions? Call us at (262) 218-2915

Sign Regulations in Brevard County, Florida

Brevard County, Florida has specific sign regulations covering 38 sign types across 17 zoning districts. Regulated sign types include Window Sign, Freestanding Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: January 16, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Brevard County, Florida

Sample Sign Requirements in Brevard County

Sign TypeMax HeightMax AreaSetback
Temporary Sign (Residentially zoned property)Varies by setback: 4 ft (0–<5 ft setback); 10 ft (5–<15 ft); 20 ft (15–<25 ft); 32 ft (≥25 ft)Aggregate maximum 48 sq ft per lot; any single temporary sign max 16 sq ft≥15 ft from side/rear property lines; intersection distance constraints as listed
Temporary Sign (Commercial/Industrial zoned property)Varies by setback: 4 ft (0–<5 ft setback); 10 ft (5–<15 ft); 20 ft (15–<25 ft); 32 ft (≥25 ft)Aggregate maximum 200 sq ft per lot or site plan≥15 ft from side/rear property lines; intersection distance constraints as listed
Portable Sign (Temporary)10 ft32 sq ft per sign face≥15 ft from all property lines and ≥25 ft from any intersection

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Brevard CountyFull Coverage

Sign Types Covered

38

  • Window Sign
  • Freestanding Sign
  • Wall Sign
  • Flagpole/Flags
  • +2 more types

Zoning Districts

17

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Brevard County

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Brevard County, the height limit for Freestanding Sign (Commercial uses only) in the General Use (GU) and other zoning districts is 20 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Brevard County require a permit. From the submission notes on this page: No master sign plan requirement is specified in the provided text. Run a code check for an exact address to see the permit requirements for that zone.

Brevard County's sign code covers 38 sign types, including Window Sign, Freestanding Sign, Wall Sign, and Flagpole/Flags. Most commercial signs need a permit. The ordinance lists 15 exemptions. One of them: Change of sign copy or repainting a sign face (no permit) (Sec. 62-3307(1)). The full list is on this page.

In Brevard County, Freestanding Sign (Commercial uses only) in the General Use (GU) and other zoning districts must be set back at least 15 ft from all property lines. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Brevard County's sign ordinance that cover digital, changing, or flashing signs: Animated or activated signs (including flashing/oscillating/swinging) are prohibited (Sec. 62-3309(a)(8); definitions Sec. 62-3301). Illuminated signs may not produce glare on roadways or surrounding properties; must be shielded and comply with lighting standards (Sec. 62-3314; digital billboards excepted per Sec. 62-3306(d)(4)). Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Brevard County Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Brevard County, Florida, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Brevard County, Florida Sign Rules at a Glance

Brevard County, Florida regulates 38 sign types across 17 zoning districts. Portable Signs (Temporary) are capped at 10 ft tall and 32 sq ft per sign face, set back at least 15 ft from all property lines and ≥25 ft from any intersection (Sec. 62-3317(3)). Most commercial signs in Brevard County require a permit.

Detailed Sign Ordinance Requirements for Brevard County, Florida

Sign Rules by Zoning District in Brevard County (17 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones11Flagpole max height 32 ftAggregate maximum 200 sq ft per lot or site planNot listed
General Use (GU); Productive Agricultural (PA); Agricultural (AGR); Agricultural Residential (AU)8Flagpole 32 ft max150 sq ft per freestanding signNot listed
General Use (GU) (Commercially developed agricultural tracts); Productive Agricultural (PA) (Commercially developed agricultural tracts); Agricultural (AGR) (Commercially developed agricultural tracts); Agricultural Residential (AU) (Commercially developed agricultural tracts)732 ft pole height150 sq ft per sign; parcel aggregate for freestanding signs ≤300 sq ftNot listed
Rural Estate Use Residential (REU); Rural Residential (RR-1); Suburban Estate Residential Use (SEU); Suburban Residential (SR); Estate Use Residential (EU, EU-1, EU-2); Single-Family Residential (RU-1-7, RU-1-9, RU-1-11, RU-1-13); Single-Family Attached Residential (RA-2-4, RA-2-6, RA-2-8, RA-2-10); Rural Residential Mobile Home (RRMH-1, RRMH-2.5, RRMH-5); Single-Family Mobile Home (TR-1, TR-1-A, TR-2); Mobile Home Park (TR-3); Single-Family Mobile Home Cooperative (TRC-1); Environmental Area (EA); ARR3Flagpole up to 32 ftFlag size tied to pole height (≤25% of pole height; length ≤2× height)Not listed
Low-Density Multiple-Family Residential (RU-2-4, RU-2-6, RU-2-8); Medium-Density Multiple-Family Residential (RU-2-10, RU-2-12, RU-2-15)532 ft pole24 sq ftNot listed
High-Density Multiple-Family Residential (RU-2-30)432 ft pole24 sq ftNot listed
High-Density Multiple-Family Residential (RU-2-30) (Approved commercial areas)620 ft150 sq ft per sign; parcel aggregate for freestanding signs ≤300 sq ftNot listed
Planned Unit Development (PUD)332 ft pole1 sq ft (home occupation/limited identification per Table 1 note 2)Not listed
Planned Unit Development (PUD) (Approved commercial areas)520 ft150 sq ft per sign; parcel aggregate for freestanding signs ≤300 sq ftNot listed
Residential Planned Unit Development (RPUD)332 ft pole1 sq ft (home occupation/limited identification per Table 1 note 2)Not listed
Residential Planned Unit Development (RPUD) (Approved commercial areas)520 ft150 sq ft per sign; parcel aggregate for freestanding signs ≤300 sq ftNot listed
Restricted Neighborhood Retail Commercial (BU-1-A); Institutional (IN(L), IN(H))832 ft pole150 sq ft per signNot listed
General Retail Commercial (BU-1); Retail, Warehousing and Wholesale Commercial (BU-2); General Tourist Commercial (TU-1); Light Industrial (IU); Heavy Industrial (IU-1); Planned Industrial Park (PIP); Planned Business Park (PBP)820 ft150 sq ft per signNot listed
Transient Tourist Commercial (TU-2)920 ft (standard); overlay height per structural height thresholdsUp to 250 sq ft per sign; if more than one freestanding sign is permitted on parcel, aggregate freestanding area ≤400 sq ft under overlayNot listed
Recreational Vehicle Park (RVP)720 ft150 sq ft per sign; aggregate for freestanding signs ≤300 sq ft per parcelNot listed
Residential-Professional (RP)620 ft150 sq ft per sign; aggregate for freestanding signs ≤300 sq ft per parcelNot listed
Government Managed Land (GML (P, I, U, H))632 ft pole150 sq ft per signNot listed

Zone-by-Zone Sign Requirements in Brevard County(sample of 3 of 17 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign (Residentially zoned property)Varies by setback: 4 ft (0–<5 ft setback); 10 ft (5–<15 ft); 20 ft (15–<25 ft); 32 ft (≥25 ft)Aggregate maximum 48 sq ft per lot; any single temporary sign max 16 sq ftNot listed≥15 ft from side/rear property lines; intersection distance constraints as listedNot listedOn private property in any residential zoning classificationNot listedUnlockSec. 62-3317(1)a–b, c
Temporary Sign (Commercial/Industrial zoned property)Varies by setback: 4 ft (0–<5 ft setback); 10 ft (5–<15 ft); 20 ft (15–<25 ft); 32 ft (≥25 ft)Aggregate maximum 200 sq ft per lot or site planNot listed≥15 ft from side/rear property lines; intersection distance constraints as listedNot listedOn private property in any commercial or industrial zoning classificationNot listedUnlockSec. 62-3317(1)a–b, c
Portable Sign (Temporary)10 ft32 sq ft per sign faceNot listed≥15 ft from all property lines and ≥25 ft from any intersectionMax 3 per premisesOn the premises where activity/event is taking placeNot listedUnlockSec. 62-3317(3)
Temporary Construction (Project) Sign4 ft (≤25 ft setback); 8 ft (≥25 ft setback from right-of-way)50 sq ft per signNot listed≥15 ft from all property lines1 per frontage; +1 per additional 200 ftOn-site per street frontage after preliminary plat (each phase) or site plan approvalNot listedUnlockSec. 62-3317(4); Sec. 62-3307(15)
Temporary Special Event Sign – BannersBanners: up to 20 ft overall height when installedUp to 75 sq ft per sign faceNot listed≥10 ft from all property lines; ≥25 ft from intersectionsMax 2 banner signs per parcelAny zoning district; securely anchored to buildings/poles/structural supports (not to utilities)Not listedUnlockSec. 62-3317(5); Sec. 62-3316(g)(2)
Temporary Special Event – Cold Air InflatableNot listedNot listedNot listed≥10 ft from all property lines; ≥25 ft from intersections (by special event sign criteria)Not listedAll nonresidential zoning districtsNot listedUnlockSec. 62-3317(5); Table 1 note 3
Right-of-Way Temporary Directional Signs (Special events, garage sales, model homes/open houses)4 ft4 sq ft per signNot listed≥5 ft from edge of pavement/curb; ≥25 ft from intersections; not in mediansMax 6 per event locationCounty right-of-way (not in medians), set back from edge of pavement/curbNot listedUnlockSec. 62-3309(a)(1)(d); Sec. 62-3317(2)
Flagpole/Flags (Permanent)Flagpole max height 32 ftFlag size limited by pole height: flag height ≤25% of pole height; length ≤2× flag heightNot listed≥15 ft from all property lines; ≥25 ft from intersectionsMax 4 flagpoles per parcelOn private property, where permitted by zoneNot listedUnlockSec. 62-3316(g)(1); Table 1 (flags permitted as shown by zone)

General Use (GU); Productive Agricultural (PA); Agricultural (AGR); Agricultural Residential (AU)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Commercial uses only)20 ft150 sq ft per freestanding signNot listed≥15 ft from all property lines; at intersections within 25 ft: pole/pedestal signs require 8 ft clearance to bottom; ground signs max 4 ft height1 per street frontage; +1 for each additional 200 ft of frontageOn parcels with commercial uses in GU/AU/PA/AGRNot listedUnlockTable 1 (GU, AU, PA, AGR, note 1); Sec. 62-3316(b)(1)–(6)
Wall Sign (Commercial uses only)Shall not project above rooflineNot listedNot listedNot listedLimited by aggregate area formulaExterior building walls for commercial usesNot listedUnlockTable 1 (note 1); Sec. 62-3316(c)(1)–(5)
Projecting Sign (Commercial uses only)Top of sign ≤20 ft above ground; cannot extend above rooflineNot listedNot listedNot listed1 projecting sign may be substituted per wall signAttached to building facadeNot listedUnlockTable 1 (note 1); Sec. 62-3316(d)(1)–(5)
Directional/Identification/Instructional/Directory Signs (Commercial uses only)Not listedNot listedNot listedNot listedNot listedOn-site as needed for commercial usesNot listedUnlockTable 1 (note 1); Sec. 62-3307(3); Sec. 62-3316(f) (ingress/egress standards apply where used)
Window SignNot listed≤50% of each windowNot listedNot listedNot listedIn windows/glass doorsNot listedUnlockTable 1 (wall/window permitted); Sec. 62-3307(6); Sec. 62-3316(a)
Development/Subdivision SignNot listedNot listedNot listedNot listedNot listedAt development/subdivision entrancesNot listedUnlockTable 1 (Development and subdivision signs = Permitted)
Ingress/Egress Directional Sign (if used for traffic movements on-site)4 ft4 sq ftNot listedNot listedMax 2 per ingress/egress pointAt each approved point of ingress/egress to parking areasNot listedUnlockSec. 62-3316(f); Table 1 (Directional... permitted for commercial uses only)
Flagpole/FlagsFlagpole 32 ft maxFlag height ≤25% of pole height; length ≤2× heightNot listed≥15 ft from property lines; ≥25 ft from intersectionsMax 4 flagpolesOn-siteNot listedUnlockTable 1; Sec. 62-3316(g)(1)

Transient Tourist Commercial (TU-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Cumulative On-Premises Sign AllowanceNot listedNot listedNot listedNot listedNot listedTU-2 parcelsNot listedUnlockSec. 62-3316(a); Table 1 (TU-2 row)
Freestanding Sign20 ft (standard); overlay height per structural height thresholds150 sq ft per sign (standard); up to 250 sq ft if using TU-2 overlay allowance (see suffixed entry)Not listed≥15 ft from property lines; intersection clearance rules1 per frontage; +1 per additional 200 ftOn-siteNot listedUnlockSec. 62-3316(b); Table 1
Freestanding Sign (TU-2 Overlay)Based on structural height thresholds in Article VIUp to 250 sq ft per sign; if more than one freestanding sign is permitted on parcel, aggregate freestanding area ≤400 sq ft under overlayNot listedPer Sec. 62-3316(b)(4) and general intersection clearancePer Sec. 62-3316(b)(1) and overlay aggregate limitsAll properties within the TU-2 zoning classificationNot listedUnlockSec. 62-3316(h)(1)
Wall SignNot above rooflineNot listedNot listedNot listedBy aggregate limitBuilding wallsNot listedUnlockSec. 62-3316(c)
Projecting Sign≤20 ft; not above roofline≤ area of replaced wall signNot listedNot listed1 projecting per wall sign replacedAttached to facadeNot listedUnlockSec. 62-3316(d)
Canopy/Awning/Marquee SignNot listedNot listedNot listedNot listedMax 1 under-canopy sign per establishmentOn canopy/awning/marqueeNot listedUnlockTable 1; Sec. 62-3316(d)(3)
Directional/Identification/Instructional/DirectoryNot listedNot listedNot listedNot listedNot listedOn-siteNot listedUnlockTable 1; Sec. 62-3307(3); Sec. 62-3316(f)
Window SignNot listed≤50% of each windowNot listedNot listedNot listedWindows/glass doorsNot listedUnlockSec. 62-3307(6); Sec. 62-3316(a)

PermitPal covers all 17 zoning districts in Brevard County. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Brevard County

  • Placement of signs on county property/right-of-way is prohibited, except for: government regulatory signs; emergency/warning signs by authorized agencies/contractors; authorized bus bench/shelter signs; temporary directional signs that meet Sec. 62-3317(2); beautification/landscaping sponsorship signs up to 4 sq ft and 2 ft high (Sec. 62-3309(a)(1)).
  • Portable signs are prohibited except as permitted under temporary sign provisions (Sec. 62-3309(a)(2), Sec. 62-3317).
  • Signs that imitate authorized traffic signs, signals, or devices are prohibited (Sec. 62-3309(a)(3)).
  • Snipe signs are prohibited (Sec. 62-3309(a)(4)).
  • Signs determined to be structurally unsafe or a hazard to public safety are prohibited (Sec. 62-3309(a)(5)).
  • Abandoned signs are prohibited (Sec. 62-3309(a)(6)).
  • Any series of two or more signs that must be read together to obtain a single message is prohibited (Sec. 62-3309(a)(7)).
  • Animated or activated signs (including flashing/oscillating/swinging) are prohibited (Sec. 62-3309(a)(8); definitions Sec. 62-3301).
  • Roof signs are prohibited, except when incorporated into building plans as an integral part of the structure (Sec. 62-3309(a)(9)).
  • Erecting/constructing/locating any sign without required permits is prohibited (Sec. 62-3309(a)(10); permits Sec. 62-3306).
  • No new off‑premises signs may be erected after October 16, 2003, except upgrades/replacements/modifications to existing nonconforming off‑premise signs or billboards pursuant to condemnation/settlement allowances; digital face relocation only at the Board’s discretion (Sec. 62-3309(a)(11); Sec. 62-3306(d); Sec. 62-3318).
  • No sign may be placed where it interferes with or obstructs free and clear vision for pedestrian, bicycle, or vehicular traffic; no part of any sign closer than 25 feet to the intersection of right‑of‑way lines, except as specifically provided for certain freestanding sign clearances (Sec. 62-3311; see Sec. 62-3316(b)(4)).
  • No sign may obstruct a fire escape, window, door, or other opening used for entry/exit or ventilation (Sec. 62-3312).
  • Signs may not be erected in a drainage or utility easement or right‑of‑way except where specifically permitted (Sec. 62-3313).
  • Illuminated signs may not produce glare on roadways or surrounding properties; must be shielded and comply with lighting standards (Sec. 62-3314; digital billboards excepted per Sec. 62-3306(d)(4)).
  • Signs must not cause interference with radio, television, or other communications; must be constructed/grounded accordingly (Sec. 62-3315).

Exempt Signs in Brevard County

  • Change of sign copy or repainting a sign face (no permit) (Sec. 62-3307(1)).
  • Traffic regulatory, directional, and instructional signs by authorized government agents or by private developments for public safety (must comply with MUTCD) (Sec. 62-3307(2)).
  • Small identification signs showing only name/address: up to 2 sq ft for single‑family residential; up to 4 sq ft for multifamily, nonresidential, or mixed‑use (Sec. 62-3307(3)).
  • Flags displayed on a flagpole (must meet Sec. 62-3316(g) criteria) (Sec. 62-3307(4)).
  • Memorial signs (names/dates/historical data) cut into/inlaid/affixed to a building face (Sec. 62-3307(5)).
  • Window signs not exceeding 50% of each individual window (nonprofit special event signs, open/closed signs, and hours of operation are excluded from the 50% calculation) (Sec. 62-3307(6)).
  • Machine/equipment signs identifying only the product/service dispensed (e.g., vending machines, newspaper racks, telephone booths); gasoline/fuel pricing signs required by law (Sec. 62-3307(7)).
  • Nonilluminated political campaign and public issue signs (subject to Sec. 62-3317) (Sec. 62-3307(8)).
  • Holiday signs/emblems/symbols/decorations for national or religious observance (Sec. 62-3307(9)).
  • Garage sale signs (subject to Sec. 62-3317) (Sec. 62-3307(10)).
  • Real estate signs for sale/lease/rent, including open house and model home signs (subject to Sec. 62-3317) (Sec. 62-3307(11)).
  • Vehicular signs (Sec. 62-3307(12)).
  • Public convenience and warning signs (e.g., restrooms, public telephones, no trespassing, danger) (Sec. 62-3307(13)).
  • Historical markers designating recognized historic structures/places/sites (Sec. 62-3307(14)).
  • Temporary project/construction signs under 32 sq ft (subject to Sec. 62-3317, as applicable) (Sec. 62-3307(15)).

Sign Plan & Submission Notes for Brevard County

  • No master sign plan requirement is specified in the provided text.
  • Variances from the sign code require a hearing before the Board of Adjustments; appeals are heard by the Board of County Commissioners; timelines for scheduling and written decisions are provided (Sec. 62-3319).
  • Ingress and egress directional signs are permitted only at access points as approved on the site plan or plat (Sec. 62-3316(f)(1)).
  • On-site temporary construction signs may be erected only after a preliminary plat (each subdivision phase) or site plan has been approved for the development (Sec. 62-3317(4)(a)).

Source: municode municipal code