Questions? Call us at (262) 218-2915

Sign Regulations in Crestview, Florida

Crestview, Florida has specific sign regulations covering 26 sign types across 5 zoning districts. Regulated sign types include Campaign Sign, Real Estate Sign, Construction Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Crestview, Florida

Sample Sign Requirements in Crestview

Sign TypeMax HeightMax Area
Home Occupation NameplateNot listed1 sq. ft.
Campaign Sign6 ft.9 sq. ft.
Real Estate Sign6 ft.9 sq. ft.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for CrestviewFull Coverage

Sign Types Covered

26

  • Campaign Sign
  • Real Estate Sign
  • Construction Sign
  • Home Occupation Nameplate
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Crestview

City WebsiteMunicipal Code2 permit application links available

Crestview, Florida Sign Rules at a Glance

Crestview, Florida regulates 26 sign types across 5 zoning districts. Public Utility Signs are capped at 3 ft tall and 0.5 sq ft (Sec. 7.02.08). Most commercial signs in Crestview require a permit.

Detailed Sign Ordinance Requirements for Crestview, Florida

Sign Rules by Zoning District in Crestview (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
R-1, R-2, R-3, MU68 ft.32 sq. ft.
C-1, C-2, IN, MU1485 ft. above crown of I-10672 sq. ft.
C-1, C-2, IN, P, CON, E38 ft.32 sq. ft.
P, CON, E38 ft.32 sq. ft.
General Regulations For All Zones93 ft.32 sq. ft. per face

Zone-by-Zone Sign Requirements in Crestview(sample of 3 of 5 zones)

R-1, R-2, R-3, MU

Sign TypeMax HeightMax AreaSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Home Occupation NameplateNot listed1 sq. ft.1 per propertyAffixed to front wall of the dwelling unit containing the Home OccupationUnlockTable 7.02.02
Campaign Sign6 ft.9 sq. ft.1 per propertyOn propertyUnlockTable 7.02.02
Real Estate Sign6 ft.9 sq. ft.1 per dwellingLocated on property offered for sale or rentUnlockTable 7.02.02
Construction Sign8 ft.32 sq. ft.Not listedLocated on a property where a valid building permit has been issued and has not expiredUnlockTable 7.02.02
Yard or Garage Sale SignNot listed4 sq. ft.1 per propertyLocated on property where sale is being conductedUnlockTable 7.02.02
Entrance/Exit/Directional SignNot listed4 sq. ft.Not listedNot listedUnlockTable 7.02.02

C-1, C-2, IN, MU

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Permanent Accessory Ground Sign24 ft.240 sq. ft.Not listed5 ft from property line; 10 ft from other ground signs1 per 500 linear feet of street frontageOn propertyUnlockTable 7.02.05
Awning Sign2 ft.Not listed75% of awning lengthNot listedNo maximumOn awningUnlockTable 7.02.05
Projecting/Perpendicular Sign3 ft.6 sq. ft.4 ft.Not listed1 per tenantNot listedUnlockTable 7.02.05
Billboard30 ft.310 sq. ft.38 ft.10 ft property line; 1,500 ft other billboard1 per siteNot listedUnlockTable 7.02.05, Note 14
Interstate Highway I-10 Corridor Accessory Sign85 ft. above crown of I-10420 sq. ft.Not listed25 ft front, 50 ft side/rear, 100 ft other sign1 per siteWithin 1,000 ft. of I-10 ROWUnlockTable 7.02.05, Note 13
Interstate Highway I-10 Corridor Billboard50 ft. above crown of I-10672 sq. ft.48 ft.20 ft I-10 ROW, 50 ft other property lines, 1,500 ft other billboard1 per siteWithin 1,000 ft. of I-10 ROWUnlockTable 7.02.05, Note 13, Note 14
Campaign Sign6 ft.32 sq. ft.Not listedNot listed1 per propertyOn propertyUnlockTable 7.02.02
Real Estate Sign6 ft.32 sq. ft.Not listedNot listed1 per street frontageOn property offered for sale or leaseUnlockTable 7.02.02

General Regulations For All Zones

Sign TypeMax HeightMax AreaSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Directional Sign (Single User Drive)Not listed10 sq. ft.Not listedOn parcel with single user drive and parkingUnlock7.02.06(B)
Directional Sign (Shared Access Drives/Interconnected Parking)Not listed20 sq. ft.Not listedOn parcel with shared access drives/interconnected parkingUnlock7.02.06(C)
Temporary SignNot listed16 sq. ft.Not listedNot listedUnlock7.02.04
Public Utility Sign3 ft.0.5 sq. ft.Not listedWhere needed to identify facilitiesUnlock7.02.08
Residential Development Entrance SignNot listed32 sq. ft. per face1 per entrance (either one double-faced or two single-faced per entrance)At entrance to residential subdivision or development, on common area lotUnlock7.02.07
Entrance/Exit/Directional Sign (General Provisionally Exempt)Not listed4 sq. ft.Not listedNot listedUnlockTable 7.02.02
No Trespassing/No Dumping SignNot listed4 sq. ft.Not listedNot listedUnlockTable 7.02.02
ATM SignNot listed4 sq. ft.1 per ATMNot more than 8 ft above finished elevation of ATMUnlockTable 7.02.02

PermitPal covers all 5 zoning districts in Crestview. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Crestview

  • No person shall move, erect, post, construct, paint, alter, or maintain a sign except in compliance with the standards and requirements set forth in Section 7.02.00.
  • A building permit is required for any sign that is not exempt from the standards and provisions of Section 7.02.00.
  • The installation and maintenance of signs and sign structures shall comply with the Florida Building Code and NEC, current editions.
  • All signs shall be located to comply with the clear visibility requirements set forth in the Crestview Engineering Standards Manual.
  • All signs shall be adequately maintained in a structurally sound and safe condition.
  • Off-premises signs are prohibited.
  • Portable signs are prohibited.
  • Snipe signs on public right-of-way, including temporary signs stuck in the ground (sometimes called bandit signs), and signs attached to utility poles, trees, rocks, or other natural objects, are prohibited.
  • Any sign which constitutes a traffic hazard or a detriment to traffic safety by reason of its size, location, movement, content, coloring, or method of illumination is prohibited.
  • Signs or sign structures that interfere in any way with free use of any fire escape, emergency exit, or standpipe are prohibited.
  • Signs that are of such intensity or brilliance as to cause glare or impair the vision of motorists, cyclists, or pedestrians using or entering a public way, or that are a hazard or nuisance to occupants of property, are prohibited.
  • Abandoned signs are prohibited.
  • Signs erected on or projecting over any public property or right-of-way, except by public authority for public purposes, are prohibited.
  • Any other signs not specifically permitted or exempted as set forth in Section 7.02.00 are prohibited.

Exempt Signs in Crestview

  • Regulatory, statutory, traffic control, or directional signs erected on public property by or with permission of the United States, the State of Florida, Okaloosa County, or the City are exempt from the requirement to obtain a development permit.
  • Legal notices and official instruments are exempt.
  • Signs incorporated into machinery or equipment by a manufacturer or distributor, which identify or advertise only the product or service dispensed by the machine or equipment, are exempt.
  • Advertising and identifying signs located on taxicabs, buses, trailers, trucks, or vehicle bumpers are exempt.
  • Public warning signs to indicate dangers such as swimming, animals, or similar hazards are exempt.
  • Memorial signs or tablets, names of buildings, and dates of erection when cut into masonry or constructed of bronze or other incombustible materials are exempt.
  • Signs carried by a person are exempt.
  • Provisionally exempt signs listed in Table 7.02.02 may be placed without a permit, provided they comply with the listed standards.

Sign Plan & Submission Notes for Crestview

  • A building permit is required for any sign that is not exempt from the standards and provisions of Section 7.02.00; application and review procedures for obtaining sign permits are set forth in Chapter 3.
  • There is no explicit reference to a master sign plan, sign plan, or variance requirement in the provided ordinance text.

Source: municode municipal code

Frequently Asked Questions

In Crestview, the height limit for Permanent Accessory Ground Sign in the C-1, C-2, IN, MU zoning districts is 24 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Crestview require a permit. From the submission notes on this page: A building permit is required for any sign that is not exempt from the standards and provisions of Section 7.02.00; application and review procedures for obtaining sign permits are set forth in Chapter 3. Run a code check for an exact address to see the permit requirements for that zone.

Crestview's sign code covers 26 sign types, including Campaign Sign, Real Estate Sign, Construction Sign, and Home Occupation Nameplate. Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Regulatory, statutory, traffic control, or directional signs erected on public property by or with permission of the United States, the State of Florida, Okaloosa County, or the City are exempt from the requirement to obtain a development permit. The full list is on this page.

In Crestview, Permanent Accessory Ground Sign in the C-1, C-2, IN, MU zoning districts must be set back 5 ft from property line. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

AI-Powered Research

Ready to Research Crestview Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Crestview, Florida, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds