Sign Regulations in Delray Beach, Florida
Delray Beach, Florida has specific sign regulations covering 10 sign types across 4 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Delray Beach, Florida
Sample Sign Requirements in Delray Beach
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign | Not listed | Not listed | Min. 10' from right-of-way or per zone-specific special setbacks |
| Wall Sign | Not listed | 20 square feet | Min. 10' from property line |
| Subdivision Identification Sign | Not listed | 36 square feet per sign | At least 10' from paved roadway or 5' from paved roadway if within median. |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
10
- Wall Sign
- Freestanding Sign
- Projecting Sign
- Under Canopy Sign
- +2 more types
Zoning Districts
4
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Delray Beach
Other Cities in Florida
Frequently Asked Questions
In Delray Beach, the height limit for Free-standing Sign (Primary Frontage) in the GC, AC, NC, PC, CBD, MIC, MROC, I, POD, POC, LI zoning districts is 14 feet. The height limit for Wall Sign (Facing Street) in the GC, AC, NC, PC, CBD, MIC, MROC, I, POD, POC, LI zoning districts is 12 feet (for calculation only). Maximum sign heights range from 8 inches to 14 feet across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Delray Beach require a permit. From the submission notes on this page: A permit is required for all signs unless specifically listed as exempt or prohibited. Run a code check for an exact address to see the permit requirements for that zone.
Delray Beach's sign code covers 10 sign types, including Wall Sign, Freestanding Sign, Projecting Sign, and Under Canopy Sign. Most commercial signs need a permit. The ordinance lists 12 exemptions. One of them: Hours of operation signs, non-illuminated and not more than one square foot, located close to the entry. The full list is on this page.
In Delray Beach, Subdivision Identification Sign in the Residential Zoning Districts (R-1 Districts, PRD, RL, RM, RR and AG Districts) must be set back at least 10' from paved roadway or 5' from paved roadway if within median (Sec. 4.6.7(F)(3)(g)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Delray Beach's sign ordinance that cover digital, changing, or flashing signs: A sign shall not involve intermittent lighting, animation, motion or rotation of any part of a sign structure or display, except for governmental traffic signals, traffic devices, and traffic signs as required by law. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Delray Beach Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Delray Beach, Florida, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Delray Beach, Florida Sign Rules at a Glance
Delray Beach, Florida regulates 10 sign types across 4 zoning districts. Subdivision Identification Signs in the Residential Zoning Districts (R-1 Districts, PRD, RL, RM, RR and AG Districts) are capped at 36 square feet per sign, set back at least 10' from paved roadway or 5' from paved roadway if within median (Sec. 4.6.7(F)(3)(g)). Most commercial signs in Delray Beach require a permit.
Detailed Sign Ordinance Requirements for Delray Beach, Florida
Sign Rules by Zoning District in Delray Beach (4 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 4 | Not listed | Not listed | Not listed |
| Residential Zoning Districts (R-1 Districts, PRD, RL, RM, RR and AG Districts) | 3 | 8 inches | 36 square feet per sign | Not listed |
| CF, Historic Districts, OS, OSR, OSSHAD, RO | 4 | 8 feet | 30 square feet | Not listed |
| GC, AC, NC, PC, CBD, MIC, MROC, I, POD, POC, LI | 7 | 14 feet | 160 square feet | Not listed |
Zone-by-Zone Sign Requirements in Delray Beach(sample of 3 of 4 zones)
Residential Zoning Districts (R-1 Districts, PRD, RL, RM, RR and AG Districts)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 20 square feet | Not listed | Min. 10' from property line | One per lot or parcel | Minimum of 10 feet from property line (Table 4.6.7(A)) | Not listed | Unlock | Table 4.6.7(A) (Residential Zoning Districts) |
| Freestanding Sign | 8 inches | 20 square feet per face | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 4.6.7(A) (Residential Zoning Districts) |
| Subdivision Identification Sign | Not listed | 36 square feet per sign | Not listed | At least 10' from paved roadway or 5' from paved roadway if within median. | One double-faced or two single-faced signs if two walls at entrance | At entrance to subdivision; may be within right-of-way/median with permission. | Not listed | Unlock | Sec. 4.6.7(F)(3)(g) |
CF, Historic Districts, OS, OSR, OSSHAD, RO
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 30 square feet | Not listed | Not listed | Up to two per lot, parcel or development | On building face | Not listed | Unlock | Table 4.6.7(A) (applies to CF, all Historic Districts, OS, OSR, OSSHAD, RO) |
| Projecting Sign | Not listed | 30 square feet per face | Not listed | Not listed | Not listed | From building or under canopy | Not listed | Unlock | Table 4.6.7(A) |
| Freestanding Sign | 8 feet | 30 square feet per face | Not listed | Not listed | Not listed | May be in front yard setback | Not listed | Unlock | Table 4.6.7(A) |
| Under Canopy Sign | Not listed | 4 square feet per face | Not listed | Not listed | Not listed | Under canopy | Not listed | Unlock | Table 4.6.7(A) |
GC, AC, NC, PC, CBD, MIC, MROC, I, POD, POC, LI
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Facing Street) | 12 feet (for calculation only) | 160 square feet | Not listed | Not listed | One per business per frontage | Facing each dedicated street frontage | Not listed | Unlock | Table 4.6.7(A) |
| Wall Sign (Rear of Building Not Facing Street) | Not listed | 9 square feet | Not listed | Not listed | One per building | On rear of building not facing street | Not listed | Unlock | Table 4.6.7(A) |
| Wall Sign (Facing I-95) | 12 feet (for calculation only) | 160 square feet | Not listed | Not listed | One per business | Facing I-95 | Not listed | Unlock | Table 4.6.7(A) |
| Directory Sign | Not listed | 24 square feet | Not listed | Not listed | One per building | On building face | Not listed | Unlock | Table 4.6.7(A) |
| Projecting Sign | Not listed | 30 square feet | Not listed | Not listed | One per business | From building or under canopy | Not listed | Unlock | Table 4.6.7(A) |
| Under Canopy Sign | Not listed | 4 square feet | Not listed | Not listed | One per business | Under a canopy | Not listed | Unlock | Table 4.6.7(A) |
| Free-standing Sign (Primary Frontage) | 14 feet | 160 square feet (main sign), 50 square feet (each additional sign) | Not listed | Not listed | One per frontage | Not listed | Not listed | Unlock | Table 4.6.7(A) |
PermitPal covers all 4 zoning districts in Delray Beach. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Delray Beach
- It shall be unlawful for any person to post, display, change, or erect a nonexempt sign or a sign structure that requires a permit without first having obtained a permit.
- All signs not expressly allowed by these Land Development Regulations (LDRs) are prohibited.
- Signs shall not obscure or be obscured by another sign, structure, or existing vegetation.
- Signs shall not create a hazard to automotive or pedestrian traffic.
- A sign shall not involve intermittent lighting, animation, motion or rotation of any part of a sign structure or display, except for governmental traffic signals, traffic devices, and traffic signs as required by law.
- A sign shall not produce noise or sounds.
- A sign shall not exhibit thereon any lewd, lascivious, or obscene character, or illustration.
- A sign shall not produce or emit smoke, vapor, particles, or odor.
- Banners and wind signs are prohibited.
- Off-premise signs (signs advertising establishments, merchandise, or services sold at a place other than where the sign is located) are prohibited, except for non-commercial messages.
- Roof signs are prohibited.
- Snipe signs are prohibited.
- Signs or advertising matter erected at intersections or in the right-of-way that obstructs vision or creates confusion with traffic signs, signals, or devices are prohibited.
- Vehicular signs placed on vehicles or trailers that are parked for the primary purpose of advertising are prohibited.
- Commercial signs in public rights-of-way are prohibited, except as specified in Section 4.6.7(E)(3).
- Waterborne signs and advertising displayed on vessels plying waterways are prohibited, excluding vessel identification.
Exempt Signs in Delray Beach
- ATM panels that are physically constructed within and integral to an ATM, bearing the name of the ATM system.
- Directional signs not extending more than five feet from the ground and not greater than four square feet in area.
- Flags are allowed according to specified size and number limitations for residential and nonresidential parcels.
- Hours of operation signs, non-illuminated and not more than one square foot, located close to the entry.
- Instructional signs conveying premises instructions (e.g., 'no trespassing', 'danger'), not extending more than five feet from the ground and not greater than three square feet.
- One nameplate sign per building, noncommercial, not exceeding three square feet, bearing principal occupant name or street address.
- Non-residential real estate signs: one freestanding sign per frontage, not exceeding 16 square feet and limited to seven feet in height.
- Residential real estate signs: one per lot (three square feet); for lots bordering more than one street, one per street; additional nine-square-foot sign along waterway if applicable; all are non-illuminated; additional three-square-foot rider sign may accompany.
- Window signs: plastic or painted signs up to 20% of the aggregate glass area per tenant/main use; paper signs two feet or more from glass up to 20% of aggregate area.
- Temporary non-commercial signs: may be placed with contiguous property owner's permission; maximum 12 square feet per sign face on private property; maximum three square feet in right-of-way; must not be in a location that constitutes a safety hazard or hindrance.
- Sponsorship signs attached to inside fence face surrounding sports fields, not visible outside the field; up to 32 square feet per sign.
- Tenant panel changes in a directory or permitted sign are exempt if there is no change in colors or letter style.
Sign Plan & Submission Notes for Delray Beach
- A permit is required for all signs unless specifically listed as exempt or prohibited.
- A Blanket Sign Program may be required for commercial properties with multiple tenants to establish font, color, size, and locations of signs. Approval is by the Site Plan Review and Appearance Board (SPRAB) or Historic Preservation Board (HPB) for historic sites. After approval, individual signs that conform to the plan are administratively approved.
- A Master Sign Program is required when project development is of such scale or character that exceeds normal design/aesthetic standards and more permissive signing is necessary. Approval is by SPRAB or HPB, as applicable. Approval may include waivers/adjustments from standard design/aesthetic requirements, provided the code's intent and character are maintained. After approval, individual signs consistent with the plan are administratively approved.
- Individual signs must obtain a permit unless exempt under the code or specifically prohibited.
- If a sign requires a permit and is located within easement or right-of-way, an agreement acceptable to the City Attorney is required between the property owner and the City. A performance bond or guarantee may be required.
- Permit submittals for signs over 32 square feet must be sealed by a registered engineer or architect certifying compliance with wind load requirements. Signs 32 square feet or less require a signed contractor certificate for wind loading.
- Permits for certain special purpose signs (e.g., gasoline pricing, grand opening banners, drive-thru window signs, subdivision identification, special event banners) can be issued administratively if criteria are met.
- For historic/nostalgic signs, approval from the Historic Preservation Board and City Commission may exempt from removal requirements, subject to specific criteria.
- Projecting signs extending into the right-of-way more than two feet or larger than five square feet in CBD/OSSHAD districts require approval by SPRAB or HPB.
- Some sign types or waivers may involve appeals or variances handled by SPRAB, HPB, or the City Commission.
Source: municode municipal code