Sign Regulations in Inverness, Florida
Inverness, Florida has specific sign regulations covering 21 sign types across 9 zoning districts. Regulated sign types include Traffic/Directions (Parking Areas), Freestanding Sign (Monument), Wall Sign (Building-Attached). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Inverness, Florida
Sample Sign Requirements in Inverness
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Nameplate/Identification Sign (Single-family Dwelling) | Not listed | 144 sq in (1 sq ft) | Not listed |
| Nameplate/Identification Sign (Duplex or Two-family Dwelling) | Not listed | 144 sq in (1 sq ft) per dwelling unit | Not listed |
| Identification Sign (Multiple-family Dwelling) | Not listed | 16 sq ft | Not within 15 ft of any property line |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
21
- Traffic/Directions (Parking Areas)
- Freestanding Sign (Monument)
- Wall Sign (Building-Attached)
- Nameplate/Identification Sign (Single-family Dwelling)
- +2 more types
Zoning Districts
9
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
Official Resources for Inverness
Other Cities in Florida
Frequently Asked Questions
In Inverness, the height limit for Freestanding Sign (Monument) in the CBD (Central Business District) is 10 ft (Sec. 2.10.I). Maximum sign heights range from 5 ft to 15 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Inverness require a permit. From the submission notes on this page: For towers and telecommunications facilities: a scaled site plan(s) is required and must be submitted for approval prior to installation or modification (see Section 2.5.D.15.g). Run a code check for an exact address to see the permit requirements for that zone.
Inverness's sign code covers 21 sign types, including Traffic/Directions (Parking Areas), Freestanding Sign (Monument), Wall Sign (Building-Attached), and Nameplate/Identification Sign (Single-family Dwelling). Most commercial signs need a permit. The ordinance lists 15 exemptions. One of them: Signs necessary to promote health, safety, and welfare and other regulatory, statutory, traffic control, or directional signs erected on public property with proper authority are exempt from permit requirements. The full list is on this page.
In Inverness, Freestanding Sign (Monument) in the CBD (Central Business District) must be set back 5 ft from property line (Sec. 2.10.I). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Inverness's sign ordinance that cover digital, changing, or flashing signs: Signs with flashing or intermittent lighting are prohibited in all zoning districts, except for time, temperature, or electrically controlled changing copy signs. No flashing, revolving, moving or intermittent lighting, except on holiday displays. Advertising and identifying signs on vehicles, providing they do not otherwise violate the code (not in right-of-way, no flashing etc.), are exempt from permit requirements. Run a code check for an exact address to see the rules for that zone.
Ready to Research Inverness Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Inverness, Florida, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Inverness, Florida Sign Rules at a Glance
Inverness, Florida regulates 21 sign types across 9 zoning districts. Freestanding Signs (Monument) in the C (Commercial) zoning district are capped at 10 ft tall and 64 sq ft, set back 5 ft from property line (Sec. 2.10.I). Most commercial signs in Inverness require a permit.
Detailed Sign Ordinance Requirements for Inverness, Florida
Sign Rules by Zoning District in Inverness (9 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| SLD/RS, LD/R1, ULD/R2, LMD/R3, MD/R4, RS, R-1, R-2, R-3, R-4 | 7 | 5 ft | 144 sq in (1 sq ft) | Not listed |
| RO/RP, RP, Residential Professional | 3 | 10 ft | 32 sq ft (total permitted area for all permanent signs, including freestanding) | Not listed |
| PDP (Planned Development Project) | 1 | Not listed | Not listed | Not listed |
| CBD (Central Business District) | 3 | 10 ft | 64 sq ft | Not listed |
| C (Commercial) | 3 | 10 ft | 64 sq ft | Not listed |
| I (Industrial) | 3 | 10 ft | 64 sq ft | Not listed |
| P/SP GU (Government Use), GU | 2 | 15 ft | 32 sq ft | Not listed |
| OS/R (Open Space/Resource Conservation), CON (Conservation), P-W (Wetland) | 1 | Not listed | Not listed | Not listed |
| General Regulations For All Zones | 4 | Not listed | 16 sq ft | Not listed |
Zone-by-Zone Sign Requirements in Inverness(sample of 3 of 9 zones)
SLD/RS, LD/R1, ULD/R2, LMD/R3, MD/R4, RS, R-1, R-2, R-3, R-4
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Nameplate/Identification Sign (Single-family Dwelling) | Not listed | 144 sq in (1 sq ft) | Not listed | Not listed | 1 | On the lot; location not closer than five (5) feet to right-of-way or twenty-five (25) feet to a side property line for institution signs. | Not listed | Unlock | Sec. 2.10.E.2.a |
| Nameplate/Identification Sign (Duplex or Two-family Dwelling) | Not listed | 144 sq in (1 sq ft) per dwelling unit | Not listed | Not listed | 1 per dwelling unit | On the lot; see above setbacks for institution signs | Not listed | Unlock | Sec. 2.10.E.2.b |
| Identification Sign (Multiple-family Dwelling) | Not listed | 16 sq ft | Not listed | Not within 15 ft of any property line | 1 per multiple-family building | Not within 15 ft of any property line | Not listed | Unlock | Sec. 2.10.E.2.c |
| Model Home Sign | Not listed | 16 sq ft | Not listed | Not listed | 1 | On the site of a model home | Not listed | Unlock | Sec. 2.10.E.2.d |
| Special Event/Function Sign (Religious, Charitable, Fraternal) | Not listed | 24 sq ft | Not listed | 5 ft from ROW, 25 ft from side property line | 1 per event | On premises where event is taking place; not within 5 ft of right-of-way or 25 ft of side property line; see sight triangle for corner lots. | Not listed | Unlock | Sec. 2.10.E.1.e |
| Institutional Identification Sign (School, Church, Hospital, etc.) | Not listed | 20 sq ft | Not listed | 5 ft from ROW, 25 ft from side property line | 1 per street frontage | Not closer than five (5) feet to right-of-way or twenty-five (25) feet to a side property line | Not listed | Unlock | Sec. 2.10.E.1.d |
| Political Sign (Residential) | 5 ft | 9 sq ft | Not listed | 2 ft from public ROW | 1 per lot per candidate | Set back at least 2 feet from public right-of-way | Not listed | Unlock | Sec. 2.10.G |
CBD (Central Business District)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Building-Attached) | Not listed | Maximum area determined by 10% formula | Not listed | Not listed | Not listed | Front, side, or rear of occupied portion; if not fronting a ROW, on facade fronting on ROW (max 30% of total ROW facade) | Not listed | Unlock | Sec. 2.10.E.4.a-b |
| Freestanding Sign (Monument) | 10 ft | 64 sq ft | Not listed | 5 ft from property line | 1 per parcel | Not less than 5 ft from property line; not in triangle of visibility. | Not listed | Unlock | Sec. 2.10.I |
| Traffic/Directions (Parking Areas) | Not listed | 3 sq ft (entrance/exit); 2 sq ft internal | Not listed | Not listed | Not listed | At parking entrances/exits; within parking area | Not listed | Unlock | Sec. 2.10.E.4.c |
C (Commercial)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Building-Attached) (Commercial) | Not listed | Maximum determined by 10% formula | Not listed | Not listed | Not listed | Front, side, or rear of building occupied | Not listed | Unlock | Sec. 2.10.E.5; cross reference to CBD |
| Freestanding Sign (Monument) | 10 ft | 64 sq ft | Not listed | 5 ft from property line | 1 per parcel | Not less than 5 ft from property line; not in triangle of visibility. | Not listed | Unlock | Sec. 2.10.I |
| Traffic/Directions (Parking Areas) | Not listed | 3 sq ft (entrance/exit); 2 sq ft internal | Not listed | Not listed | Not listed | At parking entrances/exits; within parking area | Not listed | Unlock | Sec. 2.10.E.4.c; applies by reference |
PermitPal covers all 9 zoning districts in Inverness. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Inverness
- Signs with flashing or intermittent lighting are prohibited in all zoning districts, except for time, temperature, or electrically controlled changing copy signs.
- Roof mounted signs or signs that protrude above the roof line are prohibited in all zoning districts.
- Signs displaying any statement, word, character, or illustration of an obscene, indecent, or immoral nature are prohibited.
- Signs that emulate federal, state, county, or city traffic-control signs or devices are prohibited.
- Signs located on, projecting into, or over a public right-of-way are prohibited.
- Signs that project more than three (3) feet from the building to which they are attached are prohibited.
- Advertising signs are prohibited in residential districts.
- Advertising signs are prohibited within five (5) feet of a property line.
- Signs that revolve, rotate, move, or give the illusion of movement are prohibited within fifty (50) feet of a right-of-way.
- Non-governmental signage and off-site signs are prohibited from existing and future rights-of-way.
- No building or structure shall be erected, moved, altered, expanded, or used for any purpose or in any manner other than as permitted in the district in which it is located.
- Any use not specifically permitted in a zoning district by this Code is specifically prohibited.
- No commercial vehicle exceeding one (1) ton rated capacity shall be parked, stored, or maintained on any premises in a residential district other than in an enclosed building, nor parked, stored, or maintained overnight on any street or right-of-way in a residential district.
- No farm animals or fowl not customarily considered a domestic household pet shall be kept or maintained on any lot in a residential district.
- No person, firm, or corporation shall strip, excavate, or otherwise remove top soil, dirt, or gravel for sale, or for use other than on the premises from which the same shall be taken except in connection with the construction or alteration of a building on such premises.
- No signs shall be placed on or over any public right-of-way, attached to any tree or utility pole, nor placed on any property without written consent of the property owner (for political signs).
- No more than one political sign per lot by the same candidate.
- No development shall be permitted within two hundred (200) feet of an existing or designated wellhead excluding development served by municipal water, sewer, and stormwater collection.
- No structure will be permitted in the City that exceeds five thousand (5,000) feet above the established Inverness Airport elevation and within three (3) nautical miles of the established reference point of the Inverness Airport without an Aeronautical Study determination of no hazard to airspace.
- No flashing, revolving, moving or intermittent lighting, except on holiday displays.
- No off-premises advertising sign shall be located within one thousand (1,000) feet of any other advertising or freestanding sign on the same side of the street (unless waiver granted by city council).
- No advertising sign shall exceed twenty-five (25) feet in overall height.
- No building or structure shall be erected, reconstructed, or structurally altered to exceed in height the limit designated for the district.
Exempt Signs in Inverness
- Signs necessary to promote health, safety, and welfare and other regulatory, statutory, traffic control, or directional signs erected on public property with proper authority are exempt from permit requirements.
- Public utility signs identifying underground utilities, high voltage lines, and similar facilities are exempt from permit requirements.
- Decorative flags and bunting for community-wide events when authorized by the City Manager are exempt from permit requirements.
- Memorial signs or tablets, names of buildings, and dates of erection when cut into masonry or constructed of durable materials and attached to the building are exempt from permit requirements.
- Signs incorporated into machinery or equipment by a manufacturer or distributor which identify or advertise only the product or service dispensed by the machine or equipment (e.g., vending machines, newspaper boxes, telephone booths, gasoline pumps) are exempt from permit requirements.
- Advertising and identifying signs on vehicles, providing they do not otherwise violate the code (not in right-of-way, no flashing etc.), are exempt from permit requirements.
- Warning signs not exceeding two (2) square feet located within property lines are exempt from permit requirements, subject to number and spacing restrictions.
- Occupant identification signs (one per premises, not to exceed 1 square foot, identifying occupant or lawful home occupation) are exempt from permit requirements.
- Directional signs for churches, schools, assembly facilities, or hospitals located on local streets are exempt from permit requirements (subject to size and setback).
- Legal notices and official instruments are exempt.
- Holiday lights and decorations are exempt.
- Signs carried by a person and not set on or affixed to the ground are exempt from permit requirements.
- On-site religious displays are exempt from permit requirements.
- National and state flags are exempt from permit requirements.
- Temporary signs for the sale of real estate, as provided by the section, are exempt from permit requirements.
Sign Plan & Submission Notes for Inverness
- All signs except those explicitly exempt under Section 2.10.K require a sign permit.
- No building or electrical permit for a sign shall be issued unless the sign meets both the city's sign code and relevant building/electrical codes; the more stringent applies.
- Certain shopping centers may require a special exception use for multiple tenant monument signs (see cross-reference to Section 2.5).
- For towers and telecommunications facilities: a scaled site plan(s) is required and must be submitted for approval prior to installation or modification (see Section 2.5.D.15.g).
- Any company/entity that intends to install a communications tower or alternative tower structure within the city must file a site plan with the Department of Development Services for review.
- The Design and Plan Review Committee (or Development Review Committee) must review sign plans for compliance for certain projects, especially for those not meeting standard requirements or for multiple sign/tenant projects.
- For Planned Development Districts: an amendment to the master sign plan may be required unless approved by an existing planned development.
- Where a certificate of appropriateness is required (for historical properties in the Central Business District and elsewhere), no sign (or other exterior alteration) may be installed until approved by the Architectural/Aesthetic Review Committee.
- Applicants may request site plan modifications, appeals, or variances for sign requirements through the Board of Zoning Adjustment as described elsewhere in the code.
- Sign plans must show height, area, setbacks, kind and number, and any lighting details for permit review.
- For automobile service stations and repair shops, shopping centers, planned unit developments, subdivisions, and telecommunications towers, specific sign areas, heights, and setbacks may be further restricted and are subject to review as part of site/development plan.
Source: municode municipal code