Sign Regulations in Miramar, Florida
Miramar, Florida has specific sign regulations covering 31 sign types across 5 zoning districts. Regulated sign types include Activity Identification Sign (within Freestanding Monument), Activity Identification Wall Sign (Attached to Wall), Community Information Sign (Permanent). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: June 30, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Miramar, Florida
Sample Sign Requirements in Miramar
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Activity Identification Sign (within Freestanding Monument) | 6 ft. | 24 sq. ft. (identification); message board area limited to 18 sq. ft. (within monument); combined area in wall sign limited to 12 sq. ft.; sign structure max: 72 sq. ft. | 10 ft. from property line |
| Activity Identification Wall Sign (Attached to Wall) | 4 ft. | 12 sq. ft. | Not listed |
| Address Sign (Residential) | Not listed | N/A; regulated by letter height | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
31
- Activity Identification Sign (within Freestanding Monument)
- Activity Identification Wall Sign (Attached to Wall)
- Community Information Sign (Permanent)
- Memorial Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Miramar
Other Cities in Florida
Frequently Asked Questions
In Miramar, the height limit for Major Roadway Monument Identification Sign in the Neighborhood Business (B1) and other zoning districts is 12 ft. The height limit for Activity Identification Wall Sign (Attached to Wall) in the Rural District (RL) and other zoning districts is 4 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Miramar require a permit. From the submission notes on this page: All sign permit applications must conform to any master sign plan or similar document that applies to the property (Sec. 1004.1(e)). Run a code check for an exact address to see the permit requirements for that zone.
Miramar's sign code covers 31 sign types, including Activity Identification Sign (within Freestanding Monument), Activity Identification Wall Sign (Attached to Wall), Community Information Sign (Permanent), and Memorial Sign. Most commercial signs need a permit. The ordinance lists 19 exemptions. One of them: Window signs (Sec. 1010(q)). The full list is on this page.
In Miramar, Activity Identification Sign (within Freestanding Monument) in the Rural District (RL) and other zoning districts must be set back 10 ft from property line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Miramar's sign ordinance that cover digital, changing, or flashing signs: Animated signs are specifically prohibited (Sec. 1009(b)). Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Miramar Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Miramar, Florida, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Miramar, Florida Sign Rules at a Glance
Miramar, Florida regulates 31 sign types across 5 zoning districts. Directional Signs (Residential) in the Rural District (RL) and other zoning districts are capped at 4 ft tall, 8 sq ft, and 3 ft wide, with a 5 ft setback. Most commercial signs in Miramar require a permit.
Detailed Sign Ordinance Requirements for Miramar, Florida
Sign Rules by Zoning District in Miramar (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Rural District (RL), Suburban Estate (E), Residential Single-family-1 (RS1), Residential Single-family-2 (RS2), Residential Single-family-3 (RS3), Residential Single-family-4 (RS4), Residential Single-family-5 (RS5), Residential Single-family-6 (RS6), Residential Single-family-7 (RS7), Residential Single-family-8 (RS8), Planned Unit Development Districts (PUD), Trailer/Mobile Home Park District (T) | 18 | 10 ft. | Per Sec. 1006.3 (maximum: see formula for wall signs) | Not listed |
| Low Medium Density Residential-1 (RM1), Medium Density Residential-2 (RM2), Medium High Density Residential-3 (RM3), Medium Density Residential-4 (RM4) | 9 | 10 ft. | 48 sq. ft. | Not listed |
| Conservation District (CNS), Recreation/Open Space District (OS), Commercial Recreation District (CR), Community Facilities District (CF), Utilities District (U) | 7 | 8 ft. | 24 sq. ft. (identification); 18 sq. ft. message board in monument; 72 sq. ft. structure | Not listed |
| Neighborhood Business (B1), Community Business (B2), Heavy Business (B3), Office Park (OP), Employment Center (EC), Planned Industrial Development (PID), Traditional Neighborhood Development (TND), Mixed-Use High (MH), Mixed-Use Low (ML), Transit Oriented Corridor - Residential (TOC-RS), Transit Oriented Corridor - Multi-family (TOC-RM), Transit Oriented Corridor - Mixed-Use Low (TOC-ML), Transit Oriented Corridor - Mixed-Use High (TOC-MH), Transit Oriented Corridor - Special District 1 (TOC-SD1), Transit Oriented Corridor - Special District 2 (TOC-SD2), Transit Oriented Corridor - Special District 3 (TOC-SD3) | 10 | 50 ft. | 672 sq. ft. (14 ft. × 48 ft.) | Not listed |
| General Regulations For All Zones | 1 | Residential pole: 20 ft.; Nonresidential: 40 ft. (except up to 150 ft. on stealth tower) | Residential: max 15 sq ft (20 ft pole); Nonresidential: max 96 sq ft (40 ft pole) | Not listed |
Zone-by-Zone Sign Requirements in Miramar(sample of 3 of 5 zones)
Rural District (RL), Suburban Estate (E), Residential Single-family-1 (RS1), Residential Single-family-2 (RS2), Residential Single-family-3 (RS3), Residential Single-family-4 (RS4), Residential Single-family-5 (RS5), Residential Single-family-6 (RS6), Residential Single-family-7 (RS7), Residential Single-family-8 (RS8), Planned Unit Development Districts (PUD), Trailer/Mobile Home Park District (T)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Activity Identification Sign (within Freestanding Monument) | 6 ft. | 24 sq. ft. (identification); message board area limited to 18 sq. ft. (within monument); combined area in wall sign limited to 12 sq. ft.; sign structure max: 72 sq. ft. | 12 ft. | 10 ft. from property line | Maximum 2 | 10 ft. setback from frontage | Not listed | Unlock | Sec. 1007.2 Table 1; Sec. 1007.3(a) |
| Activity Identification Wall Sign (Attached to Wall) | 4 ft. | 12 sq. ft. | 4 ft. | Not listed | Maximum 1 | Attached to principal façade | Not listed | Unlock | Sec. 1007.2 Table 1; Sec. 1007.3(a) |
| Community Information Sign (Permanent) | 8 ft. | 4 sq. ft. | Not listed | 5 ft. from pavement | Maximum 3/parcel | Setback 5 ft. from edge of pavement | Not listed | Unlock | Sec. 1007.2 Table 1; Sec. 1007.3(g) |
| Residential Community Identification Monument Sign (Entrance Feature Sign) | 10 ft. | 48 sq. ft. | Not listed | 10 ft. from property line | 1 per frontage; max 4 for entire community | At community entrance, 10 ft. setback | Not listed | Unlock | Sec. 1007.2 Table 1; Sec. 1007.3(y) |
| Directional Sign (Residential) | 4 ft. | 8 sq. ft. | 3 ft. | 5 ft. | As approved in master sign plan | 5 ft. setback | Not listed | Unlock | Sec. 1007.2 Table 1; Sec. 1007.3(i) |
| Yard/Garage Sale Sign | 3 ft. | 4 sq. ft. | Not listed | 5 ft. from ROW | 2 per dwelling | Set back 5 ft. from ROW | Not listed | Unlock | Sec. 1008.4, Table 2; Sec. 1008.5(m) |
| Contractor Sign | 6 ft. | 48 sq. ft. | Not listed | 10 ft. from property line | 1 per dwelling | 10 ft. setback | Not listed | Unlock | Sec. 1008.4 Table 2; Sec. 1008.5(a) |
| Development Sign | 6 ft. | 48 sq. ft. | Not listed | 10 ft. from property line | 1 per dwelling/single-family; 1 per frontage for multi-family/non-res | 10 ft. setback | Not listed | Unlock | Sec. 1008.4 Table 2; Sec. 1008.5(c) |
Low Medium Density Residential-1 (RM1), Medium Density Residential-2 (RM2), Medium High Density Residential-3 (RM3), Medium Density Residential-4 (RM4)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Activity Identification Sign (within Freestanding Monument) | 6 ft. | 24 sq. ft. (identification); message board area limited to 18 sq. ft.; sign structure max: 72 sq. ft. | 12 ft. | 10 ft. | Maximum 2 | 10 ft. setback from frontage | Not listed | Unlock | Sec. 1007.2 Table 1; 1007.3(a) |
| Activity Identification Wall Sign (Attached to Wall) | 4 ft. | 12 sq. ft. | 4 ft. | Not listed | Maximum 1 | Principal façade | Not listed | Unlock | Sec. 1007.2 Table 1; 1007.3(a) |
| Residential Community Identification Monument Sign (Entrance Feature Sign) | 10 ft. | 48 sq. ft. | Not listed | 10 ft. | 1 per frontage, max 4 | Community entrance, 10 ft. setback | Not listed | Unlock | Sec. 1007.2 Table 1; 1007.3(y) |
| Memorial Sign | 2 ft. | 4 sq. ft. | Not listed | Not listed | 2 | Near principal entrance | Not listed | Unlock | Sec. 1007.2 Table 1; 1010(e) |
| Community Information Sign (Permanent) | 8 ft. | 4 sq. ft. | Not listed | 5 ft. | 3 per parcel | 5 ft. setback from pavement | Not listed | Unlock | Sec. 1007.2 Table 1; 1007.3(g) |
| Warning Sign | Not listed | 2 sq. ft. | Not listed | Not listed | 2 | As required | Not listed | Unlock | Sec. 1007.2 Table 1 |
| Directional Sign (Residential) | 4 ft. | 8 sq. ft. | 3 ft. | 5 ft. | Master plan | 5 ft. setback | Not listed | Unlock | Sec. 1007.2 Table 1 |
| Nameplate Sign | Not listed | 2 sq. ft. | Not listed | Not listed | 1 | Near entrance | Not listed | Unlock | Sec. 1007.2 Table 1; 1010(f) |
Neighborhood Business (B1), Community Business (B2), Heavy Business (B3), Office Park (OP), Employment Center (EC), Planned Industrial Development (PID), Traditional Neighborhood Development (TND), Mixed-Use High (MH), Mixed-Use Low (ML), Transit Oriented Corridor - Residential (TOC-RS), Transit Oriented Corridor - Multi-family (TOC-RM), Transit Oriented Corridor - Mixed-Use Low (TOC-ML), Transit Oriented Corridor - Mixed-Use High (TOC-MH), Transit Oriented Corridor - Special District 1 (TOC-SD1), Transit Oriented Corridor - Special District 2 (TOC-SD2), Transit Oriented Corridor - Special District 3 (TOC-SD3)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Band Identification Sign | Not listed | Calculated per formula, max 200 sq. ft. | 90% of tenant façade width. | Not listed | 1 max per façade; 2 if façade qualifies; see additional_requirements | On first story façade facing a street or pedestrian entry. Max 2 band signs if two eligible façades. | Not listed | Unlock | Sec. 1007.2 Table 1; Sec. 1007.3(d) |
| Blade Identification Sign | 3 ft. | 6 sq. ft. | 3 ft. | Not listed | 1 per façade | On first story façade with principal entrance | Not listed | Unlock | Sec. 1007.2 Table 1; Sec. 1007.3(e) |
| Menu Board Monument Sign (Drive-thru restaurant) | 8 ft. | 72 sq. ft. | 12 ft. | 10 ft. | 1 per lane | 10 ft. setback; at drive-thru lane | Not listed | Unlock | Sec. 1007.2 Table 1; 1007.3(q) |
| Directory Monument Sign | 6 ft. | 24 sq. ft. | 6 ft. | 5 ft. | 3 | 5 ft. setback | Not listed | Unlock | Sec. 1007.2 Table 1 |
| Major Roadway Monument Identification Sign | 12 ft. | 96 sq. ft. | 15 ft. | 10 ft. | 4 max | 10 ft. setback; at road intersection | Not listed | Unlock | Sec. 1007.2 Table 1; 1007.3(o) |
| Digital Billboard (where permitted) | 50 ft. | 672 sq. ft. (14 ft. × 48 ft.) | 48 ft. | 15 ft. from ROW; other spacing applies | Max 2 structures/property | See location criteria; must face major expressways and be permitted only in B2, B3, OP, EC, PID, MU, U districts, abutting major expressways | Not listed | Unlock | Sec. 1014 |
| Leasing Freestanding Advertising Sign | 8 ft. | 64 sq. ft. | 8 ft. | 10 ft. | See text | 10 ft. setback | Not listed | Unlock | Sec. 1007.2 Table 1; 1007.3(n) |
| Sidewalk Sign (Sandwich Board) | 42 in. | Not listed | 36 in. | Not listed | 1 per business | At business entrance, pedestrian environment | Not listed | Unlock | Sec. 1008.4 Table 2; Sec. 1008.5(j) |
PermitPal covers all 5 zoning districts in Miramar. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Miramar
- No sign shall be erected, placed, established, created, or maintained except in conformance with the standards, procedures, exemptions, and other requirements of the sign ordinance (Sec. 1003(a)).
- No permanent or temporary sign shall be erected, installed, displayed, enlarged, relocated, or modified without the appropriate permit being issued by the city, except as provided for in Sec. 1010, Exempt Signs (Sec. 1004.1(a)).
- Signs that are not permitted or specified within the permanent sign, temporary sign, or exempt sign sections are prohibited (Sec. 1003(a), 1009(x)).
- Animated signs are specifically prohibited (Sec. 1009(b)).
- Attention attracting devices, such as streamers, pennants, propellers, inflatables, tethered balloons, etc., are prohibited (Sec. 1009(c)).
- Balloons attached to a structure, landscaping feature or the ground are prohibited (Sec. 1009(d)).
- Hazardous signs (signs that approximate traffic signs, etc.) are prohibited (Sec. 1009(h)).
- Mansard signs are prohibited (Sec. 1009(i)).
- Painted wall signs are prohibited (Sec. 1009(k)).
- Pole signs, unless specifically prescribed as permitted, are prohibited (Sec. 1009(l)).
- Portable signs are prohibited (Sec. 1009(m)).
- Projecting signs, unless specifically prescribed as permitted, are prohibited (Sec. 1009(n)).
- Roof signs are prohibited (Sec. 1009(o)).
- Snipe signs (illegally posted signs) are prohibited (Sec. 1009(p)).
- Vehicle signs that act as a portable sign when the vehicle is not usually on the road during normal business hours are prohibited (Sec. 1009(q)).
- Signs for home occupations and signs for assisted living facilities in residential zones are prohibited (Sec. 1009(r)).
- Signs installed on external raceways are prohibited (Sec. 1009(s)).
- Signs and sign structures that are not properly maintained or are abandoned are prohibited (Sec. 1009(t)).
- Strip lighting used to outline roofs or any part of a building or sign frame is prohibited (Sec. 1009(u)).
- No sign may be placed on public property or rights-of-way by anyone except the city; no sign may be placed on utility poles except as utility identification (Sec. 1009(v)).
- No sign shall be placed within a sight triangle that would obstruct visibility by pedestrian or vehicle traffic (Sec. 1009(w)).
- Any sign not specifically prescribed as a permitted sign, or exempted, is prohibited (Sec. 1009(x)).
- Conforming and nonconforming signs are prohibited on the same premises (Sec. 1011.5).
- Nonconforming signs cannot be structurally altered, enlarged, or technologically modernized unless brought into conformance (Sec. 1011.3).
Exempt Signs in Miramar
- Address signs (Sec. 1010(a))
- Bulletin boards (Sec. 1010(b))
- Community information signs (Sec. 1010(c))
- Courtesy notice signs, upon city approval (Sec. 1010(d))
- Family event signs (Sec. 1010(e))
- Flags, in accord with Sec. 1010 and related requirements (Sec. 1010(f))
- Handheld signs (Sec. 1010(g))
- Memorial signs (Sec. 1010(h))
- Nameplate signs (Sec. 1010(i))
- Political signs (Sec. 1010(j))
- Real estate signs (Sec. 1010(k))
- Sidewalk signs (Sec. 1010(l))
- Signs inside a building that are not legible from outside (Sec. 1010(m))
- Street signs pursuant to an approved site plan or erected by a governmental agency (Sec. 1010(n))
- Traffic signs that comply with FDOT and city standards (Sec. 1010(o))
- Warning signs (Sec. 1010(p))
- Window signs (Sec. 1010(q))
- Yard/garage sale signs (Sec. 1010(r))
- Signs described above are exempt only from the requirement for obtaining a sign (or building) permit, but NOT from all other Code provisions, these exempt signs must still adhere to other requirements set forth in the Sign Code, building code, fire code, and relevant sections (Sec. 1010, lead-in).
Sign Plan & Submission Notes for Miramar
- For developments of at least 10 acres, a Master Sign Program (MSP) is required for any permanent sign on the property; must be approved prior to building permit for sign installation/erection/relocation (Sec. 1004.3(b)).
- All sign permit applications must conform to any master sign plan or similar document that applies to the property (Sec. 1004.1(e)).
- A fully dimensioned master sign plan, including location/placement of all present and future signs, sign hierarchy, elevations, specifications, landscape plans, etc., must be submitted as part of the request for a Master Sign Program (Sec. 1004.3(c)).
- Blade identification signs within multiple establishment centers require a master sign plan prior to placement; locations must align with approved plan (Sec. 1007.3(e)).
- Where multiple band identification signs are present, signage must be coordinated via a master sign plan approval (Sec. 1007.3(d)(K)).
- Placement and location, mounting hardware, sign shapes, sizes, and colors for blade identification signs in multi-tenant centers must be coordinated through a master sign plan (Sec. 1007.3(e)(G)).
- Specific sign types (e.g., office building shared tenant entrance wall signs, tower entrance feature wall signs) reference that master sign plan approval is required for standards (Sec. 1007.3(t), 1007.3(bb)).
- Temporary signs for residential developments/marketing must be governed by a comprehensive signage program, to be submitted with a temporary sign permit (TSP) application before erecting signs (Sec. 1008.3).
- Revisions to an approved master sign plan must be approved by the building planning and zoning department (Sec. 1004.3(f)).
Source: municode municipal code