Sign Regulations in Miami Springs, Florida
Miami Springs, Florida has specific sign regulations covering 17 sign types across 11 zoning districts. Regulated sign types include Directional Sign, Building Address Number, Sign - General. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Sign Regulation Overview for Miami Springs, Florida
Sample Sign Requirements in Miami Springs
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Residential Development Identification Ground Sign | 4 ft | 24 sq ft per sign face | — |
| Directional Sign | — | 4 sq ft per sign face | — |
| Temporary Non-Commercial Sign | — | 6 sq ft on lot; 3 sq ft in one window | Minimum setbacks as required for all signs; placed inside sidewalk or, if none, 16 ft from street edge |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
PermitPal Coverage for Miami SpringsFull Coverage
Sign Types Covered
17
- Directional Sign
- Building Address Number
- Sign - General
- Institutional Use Sign
- +2 more types
Zoning Districts
11
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Miami Springs
Other Cities in Florida
Frequently Asked Questions
Sign height limits in Miami Springs vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Miami Springs, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Miami Springs, regulated sign types include Directional Sign, Building Address Number, Sign - General, Institutional Use Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Miami Springs vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Miami Springs are regulated with specific requirements for brightness, animation, and message duration. Miami Springs has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
AI-Powered Research
Ready to Research Miami Springs Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Miami Springs, Florida sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Miami Springs, Florida Sign Rules at a Glance
Miami Springs, Florida regulates 17 sign types across 11 zoning districts. Flags in the R-1A, R-1B, R-1C, R-1D, R-2, R-3A, R-3B, R-3C, R-TH zoning district are capped at 20 ft for flagpoles (ground-mounted), 10 ft for wall-mounted in residential tall and Up to 24 sq ft per flag for 20 ft pole height, with a Pole set back at least pole height from all property lines setback (Sec. Sec. 150-036). Most commercial signs in Miami Springs require a permit.
Detailed Sign Ordinance Requirements for Miami Springs, Florida
Sign Rules by Zoning District in Miami Springs (11 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| R-1A, R-1B, R-1C, R-1D, R-2, R-3A, R-3B, R-3C, R-TH | 7 | 20 ft for flagpoles (ground-mounted), 10 ft for wall-mounted in residential | 24 sq ft per sign face | — |
| B-1, NBD Neighborhood Business District | 8 | 1,000-10,000 sq ft: 6 ft; 10,000-25,000: 8 ft; 25,000-50,000: 12 ft; 50,000-100,000: 16 ft; 100,000+: 18 ft | Building 1,000-10,000 sq ft: 25 sq ft per face, 50 sq ft total; Building 10,000-25,000 sq ft: 49 sq ft per face, 98 sq ft total; Building 25,000-50,000 sq ft: 64/128; 50,000-100,000: 81/162; 100,000+: 100/200 | — |
| B-2, B-3, CBD Central Business District | 8 | Varies by bldg. size: 6-18 ft | 30 sq ft | — |
| B-3 Arterial Business District, O-1 Professional Office District | 4 | 3 ft | 20 sq ft | — |
| P-1 Public Property District | 1 | — | As per nonresidential districts | — |
| P-2 Church Use Only District | 1 | — | As per nonresidential districts | — |
| Northwest 36th Street District | 1 | — | — | — |
| Abraham Tract District | 1 | — | — | — |
| Airport Golf District | 1 | — | — | — |
| Miami Springs Gateway Overlay District | 1 | — | — | — |
| General Regulations For All Zones | 2 | See flag section | Up to 60 sq ft, depending on pole height | — |
Zone-by-Zone Sign Requirements in Miami Springs(sample of 3 of 11 zones)
R-1A, R-1B, R-1C, R-1D, R-2, R-3A, R-3B, R-3C, R-TH
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Residential Development Identification Ground Sign | 4 ft | 24 sq ft per sign face | — | — | 2 sign faces per road entering the development | At roads entering the development from outside; max 2 sign faces per entrance | — | Unlock | Sec. 105-034 |
| Directional Sign | — | 4 sq ft per sign face | — | — | As determined necessary by City staff | As determined necessary by staff | — | Unlock | Sec. 105-034 |
| Institutional Use Sign | — | — | — | — | — | — | — | Unlock | Sec. 105-034 |
| Temporary Non-Commercial Sign | — | 6 sq ft on lot; 3 sq ft in one window | — | Minimum setbacks as required for all signs; placed inside sidewalk or, if none, 16 ft from street edge | — | On private property, setback as required | — | Unlock | Sec. 150-032(B) |
| Temporary Real Estate Sign | — | 3 sq ft | — | — | One per street frontage | One per street frontage | — | Unlock | Sec. 150-032(B)(3)-(4) |
| Flags | 20 ft for flagpoles (ground-mounted), 10 ft for wall-mounted in residential | Up to 24 sq ft per flag for 20 ft pole height | — | Pole set back at least pole height from all property lines | 1 flagpole per lot up to one-half acre; up to 3 flagpoles for larger lots | Flagpoles must be set back from all property boundaries at least equal to pole height | — | Unlock | Sec. 150-036 |
| Building Address Number | — | — | — | — | — | Visible from right-of-way | — | Unlock | Sec. 150-031(E)(1) |
B-1, NBD Neighborhood Business District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign | 1,000-10,000 sq ft: 6 ft; 10,000-25,000: 8 ft; 25,000-50,000: 12 ft; 50,000-100,000: 16 ft; 100,000+: 18 ft | Building 1,000-10,000 sq ft: 25 sq ft per face, 50 sq ft total; Building 10,000-25,000 sq ft: 49 sq ft per face, 98 sq ft total; Building 25,000-50,000 sq ft: 64/128; 50,000-100,000: 81/162; 100,000+: 100/200 | — | 5 ft from property line, 7 ft from right-of-way, 5 ft from adjacent property, 25 ft from ROW intersection | See formula | At main street. Min 5 ft from property line, 7 ft from public right-of-way line, 5 ft from adjacent property, 25 ft from an intersection. | — | Unlock | Sec. 150-035(A) |
| Wall Sign (Main) | — | Based on formula; no explicit maximum | No more than 75% of width of building/storefront | — | 1 per frontage; 2 if endcap | Centered on frontage | — | Unlock | Sec. 150-035(B) |
| Wall Sign (Building/Top Floor ID) | — | — | — | — | 3 | Top floor of building | — | Unlock | Sec. 150-035(B) |
| Directional Sign | 3 ft | 3 sq ft per face | — | — | As per site plan | As approved in site plan | — | Unlock | Sec. 150-035(C) |
| Window Sign | — | 20 sq ft per establishment (total for both) | — | — | 2 per establishment | On window/door at ground level | — | Unlock | Sec. 150-033(M) |
| Temporary Signs (Commercial Banner—Special Event) | — | 30 sq ft | — | — | 1 per tenant | Building facade, not above roof/parapet | — | Unlock | Sec. 150-032(C)(1) |
| Flags | Up to bldg. height, max 25 ft pole for 1–2 story, 35 ft for 3–5 story, 45 ft for 6+; not above roofline | See general; Up to 24 sq ft/flag for 20 ft pole, up to 40 sq ft/flag for 25–35 ft pole, to 60 sq ft for 35–45 ft pole | — | Flagpole setback = pole height to all property lines | As above | Ground or wall pole; must meet setbacks | — | Unlock | Sec. 150-036 |
| Building Address Number | — | — | — | — | — | Visible from right of way | — | Unlock | Sec. 150-031(E)(1) |
B-2, B-3, CBD Central Business District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign | Varies by bldg. size: 6-18 ft | Same as B-1/NBD; varies by building size: 1,000–10,000 sq ft = 25 sq ft per face, etc. | — | See B-1 | 1 (<200ft frontage) or 2 (≥200ft or 100,000 sq ft GFA) | Main street, with required setbacks | — | Unlock | Sec. 150-035(A) |
| Wall Sign (Main/Storefront) | — | — | 75% of building/storefront width | — | 1 per frontage, 2 if endcap | Centered on storefront | — | Unlock | Sec. 150-035(B) |
| Wall Sign (Building/Top Floor ID) | — | — | — | — | 3 max | Top floor | — | Unlock | Sec. 150-035(B) |
| Directional Sign | 3 ft | 3 sq ft/face | — | — | As per site plan | As shown on site plan | — | Unlock | Sec. 150-035(C) |
| Window Sign | — | 20 sq ft | — | — | 2 per establishment | Ground floor window/door | — | Unlock | Sec. 150-033(M) |
| Temporary Commercial Banner (Special Event) | — | 30 sq ft | — | — | 1 per tenant | Building facade | — | Unlock | Sec. 150-032(C) |
| Flags | See general regulations | See general regulations; determined by pole height | — | — | Per general | — | — | Unlock | Sec. 150-036 |
| Building Address Number | — | — | — | — | — | Visible from right of way | — | Unlock | Sec. 150-031(E)(1) |
PermitPal covers all 11 zoning districts in Miami Springs — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.
See all 11 zones for Miami Springs — start freeProhibited Signs in Miami Springs
- No sign shall be erected, constructed, enlarged, posted, altered, maintained, moved, or converted in the City without first obtaining a sign permit, unless otherwise exempted.
- The following signs are prohibited in all zoning districts: Animated signs; Copycat and obstructing signs; Emitting signs; Human signs; Illegal signs; Inflatable signs and balloons; Mobile signs; Off-premise signs; Pole signs; Projecting signs; Roof signs; A-frame or sandwich signs; Snipe signs; Painted wall signs; Signs not authorized by the property owner; any other sign not specifically allowed by the sign ordinance.
- Private signs on public property and rights-of-way are unauthorized and subject to removal and disposal.
- No sign or sign structure shall be placed so as to interfere with traffic or pedestrian safety.
- No sign or sign structure shall be placed so as to obstruct or interfere physically or visually with fire apparatus, police apparatus, traffic signals or signs, or devices maintained under public authority.
- No sign or sign structure shall be attached in a way that interferes with any opening required for ventilation.
- No sign or sign structure shall be erected, constructed, or maintained so as to obstruct any fire escape, required exit, window, or door opening used as a means of egress.
- Signs must not directly or indirectly create a traffic or fire hazard, interfere with the free and unobstructed use of streets, sidewalks, or building entrances, or obstruct clear vision at intersections or drives, or be confusing with authorized traffic signs or devices.
- No sign shall be authorized that is not specifically allowed by the sign ordinance.
- Illuminated signs facing a residential district shall not shine directly onto residential properties.
- Monument sign faces may not face single-family residential districts.
- All signs not mounted to a building must be separated from another sign by at least 200 feet.
- All mechanical and electrical elements of a sign must be fully screened or concealed.
- No mural may be located within the city.
- Murals are prohibited, and all existing murals must be removed by June 30, 2027 (unless otherwise specified for amortization).
Exempt Signs in Miami Springs
- Government signs on government property or public rights-of-way, including City, County, or State property, are exempt.
- Hazard, life-safety, warning signs, and traffic control devices required or installed by a government agency on public or private property are exempt.
- Notices required to be posted by law or ordinance on public or private property are exempt.
- Signs wholly within the interior of a building or structure and not visible from the exterior are exempt.
- Temporary non-commercial signs up to six square feet in total per lot, and temporary window signs up to three square feet are allowed at any time, without permit.
- One temporary, non-commercial sign per event, and certain event-related temporary signs, are allowed without permit (see temporary sign rules for specifics).
- Temporary commercial special event building banner signs require a permit, but other specified temporary signs do not.
- Routine repainting, cleaning, and other normal maintenance or repair of a previously permitted sign (so long as sign structure is not modified) does not require a permit.
- Flags, as regulated by Sec. 150-036, are not governed by the general sign requirements.
- Signs required for building address for emergency wayfinding and public safety are mandatory in every zoning district and not subject to discretionary sign regulation.
Sign Plan & Submission Notes for Miami Springs
- A master sign plan is required for multi-tenant properties or as referenced in sign code definitions as a 'master sign plan.'
- Sign permit applications must include scaled drawings showing design, colors, materials, dimensions, size, area, method of attachment, and source of illumination, signed and sealed by a professional architect or engineer.
- A dimensioned site plan must be submitted with sign permit application, showing location of sign relative to property lines and other structures.
- If a freestanding or monument sign, a landscape plan showing screening of the base or foundation is required as part of the permit application.
- Architectural Review Board (ARB) approved master sign plan is required and referenced in the sign permit review process if applicable.
- Permanent signs (non-residential districts) must comply with landscaping requirements as part of permit/site plan approval.
- Pursuant to the sign code, if located within a master development, signs must be consistent with the approved master sign plan/program.
- Application for development, redevelopment, or building permit in designated overlay or special districts (such as NW 36th St. District, Gateway Overlay, Abraham Tract, Airport Golf District) shall include detailed plans for all signage; including sign plans, elevations, exterior color samples, and other requirements as part of comprehensive site/development plan review and approval.
- Repainting or maintenance must be consistent with an approved sign plan.
Source: municode municipal code