Sign Regulations in Palm Beach, Florida

Palm Beach, Florida has specific sign regulations covering 29 sign types across 5 zoning districts. Regulated sign types include Development Sign, Temporary Political Sign, Temporary Noncommercial Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Sign Regulation Overview for Palm Beach, Florida

Sample Sign Requirements in Palm Beach

Sign TypeMax HeightMax AreaSetback
FlagFlagpole height not to exceed 40% above building height limit of the district unless property is over 5 acres, in which case flagpole may exceed with special exception; flag must be set back at least 120 ft from any lot line if over max limits.216 sq. ft. (for 70 ft pole, or otherwise as provided in table/proportion formula)Oversize flagpole/flag: 120 ft from any lot line.
Nameplate/Identification Sign (Single-Family)1 sq. ft.
Aid to Traffic/Access Drive Sign (Single-Family)1 sq. ft.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Palm BeachFull Coverage

Sign Types Covered

29

  • Development Sign
  • Temporary Political Sign
  • Temporary Noncommercial Sign
  • Tow-away Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Palm Beach

City WebsiteMunicipal Code3 permit application links available

Frequently Asked Questions

Sign height limits in Palm Beach vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Palm Beach, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Palm Beach, regulated sign types include Development Sign, Temporary Political Sign, Temporary Noncommercial Sign, Tow-away Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Palm Beach vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Palm Beach are regulated with specific requirements for brightness, animation, and message duration. Palm Beach has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Palm Beach Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Palm Beach, Florida sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Palm Beach, Florida Sign Rules at a Glance

Palm Beach, Florida regulates 29 sign types across 5 zoning districts. Yard Identification Sign (Multifamily/Other)s in the Residential Districts, R-AA, R-A, R-B zoning district are capped at 6 ft. above lot grade tall and 6 sq. ft., with a 10 ft to front/street side lot line setback (Sec. Sec. 134-2402(2)). Most commercial signs in Palm Beach require a permit.

Detailed Sign Ordinance Requirements for Palm Beach, Florida

Sign Rules by Zoning District in Palm Beach (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones3Flagpole height not to exceed 40% above building height limit of the district unless property is over 5 acres, in which case flagpole may exceed with special exception; flag must be set back at least 120 ft from any lot line if over max limits.216 sq. ft. (for 70 ft pole, or otherwise as provided in table/proportion formula)
Residential Districts, R-AA, R-A, R-B1530 inches above yard ground level40 sq. in.
R-C, R-D(1), R-D(2), PUD220 sq. ft.
Commercial Districts, C-TS, C-WA, C-B, C-OPI1515 ft OR below ceiling height of first floor (lowest of the two); cannot go higher except on some existing multistory facades.See residential district sale/rental sign sections 134-2403 (R-AA, R-A, R-B) or 134-2404 (R-C, R-D(1), R-D(2), PUD)
C-PC26 ft.10 sq. ft.

Zone-by-Zone Sign Requirements in Palm Beach(sample of 3 of 5 zones)

Residential Districts, R-AA, R-A, R-B

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate/Identification Sign (Single-Family)1 sq. ft.2 per lot/main buildingOn propertyUnlockSec. 134-2402(1)
Yard Identification Sign (Multifamily/Other)6 ft. above lot grade6 sq. ft.10 ft to front/street side lot line1 per lot; 2 for corner or through lotYard area, not closer than 10 ft to front/street side lot lineUnlockSec. 134-2402(2)
Sale or Rental Sign (R-AA, R-A, R-B)4 ft.40 sq. in.5 ft from front property line1 per premisesOn property for sale/rent, not closer than 5 ft from front property lineUnlockSec. 134-2403
Development Sign (R-AA, R-A, R-B)4 ft.40 sq. in.5 ft from front/street side lot line1 per property; or 1 per frontageOn developing propertyUnlockSec. 134-2406
Temporary Political Sign4 ft. including supports4 sq. ft.5 ft from front property/street, 10 ft from other lot lines1 per candidate/measure; max 3 total temp signsOn private property with owner's permission onlyUnlockSec. 134-2409
Temporary Noncommercial Sign4 ft. including supports4 sq. ft.5 ft from front property/street, 10 ft from other lot lines1 per issue/message; max 3 total temp signsPrivate property with owner's permissionUnlockSec. 134-2409
Artisan Sign6 sq. ft.10 ft from front/street side lot line1 per artisanOn premise where artisan is workingUnlockSec. 134-2408
Development Sign (R-C, R-D(1), R-D(2), PUD)20 sq. ft.10 ft from front/street side lot line1 per property; or 1 per frontageOn developing propertyUnlockSec. 134-2407

Commercial Districts, C-TS, C-WA, C-B, C-OPI

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Building Identification Sign20 sq. ft.One per wall with street frontageFront of wall of building, flat against wall, each wall that fronts a street.UnlockSec. 134-2437(1)
Business Identification Sign15 ft OR below ceiling height of first floor (lowest of the two); cannot go higher except on some existing multistory facades.Maximum 20 sq. ft. per individual sign, 10 sq. ft. if frontage <18 ft.Flat on wall, in windows/doors on ground floor, or in via as hanging sign.UnlockSec. 134-2437(2), 134-2438, 134-2440, 134-2441, 134-2439
Business Directory Sign (Via Entrance)6 sq. ft.One per direction of via entranceFacing each direction of via/arcade entrance, mounted on wall.UnlockSec. 134-2437(3)
Property Identification Yard Sign5 ft.6 sq. ft.No further than 10 ft from entranceOne per vehicular entranceWithin 10 feet of vehicular entrance from street.UnlockSec. 134-2437(5), 134-2437(6)
Temporary Political Sign4 ft. including supports4 sq. ft.5 ft from front/street, 10 ft from other lot lines (option 1); none required if in window/door (option 2)1 per candidate/ballot measure; max 3 temp signs (option 1); Option 2 (window/door) per total allowanceOn lots/storefronts with owner's permission. Alternatively, see below (option 2).UnlockSec. 134-2447
Temporary Noncommercial Sign4 ft.4 sq. ft.See temporary political sign options1 per issue/message; max 3 temp signs (option 1); Option 2 (window/door) per total allowanceOn lots with permission or in windows/doors (see above for temporary political signs).UnlockSec. 134-2447
Menu Sign2 sq. ft.Within 4 ft. of entrance1 per establishmentWithin 4 ft. of front entrance to restaurant/take-out retail establishment.UnlockSec. 134-2448
Development Sign10 sq. ft.5 ft from front/street side lot lineOne per property; or one per frontageOn property being developedUnlockSec. 134-2446

C-PC

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Property Identification Yard Sign6 ft.6 sq. ft.Within 10 ft of entrance/exitNo more than 2 yard signs flanking each entrance/exitWithin 10 ft of vehicular entrance/exit from street.UnlockSec. 134-2437(6)
Development Sign10 sq. ft.One per property; or one per frontageOn property being developedUnlockSec. 134-2446

PermitPal covers all 5 zoning districts in Palm Beach — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 5 zones for Palm Beach — start free

Prohibited Signs in Palm Beach

  • Signs that are not specifically permitted by this division are prohibited.
  • No sign other than an official traffic sign erected by the town, county, state, federal government, or agencies thereof shall be erected within the right-of-way lines of any street or public way.
  • No sign or banner shall be hung on, from, or beneath any canopy, awning, or marquee.
  • No sign, including numerals, lettering, illustrations, logos, or characters, shall be painted or installed on any awning visible from public or private streets.
  • No sign shall be permitted within any district for any purpose which is flashing or which has any animation or movement associated with it.
  • No banner signs of any kind, including those produced on cloth, paper or fabric, shall be permitted. This does not prohibit display of flags, as defined in the ordinance.
  • Strip lighting of any nature, including neon tubing, fluorescent lights, or similar, shall not be used to outline any building, fence, wall, or other structure.
  • Strobe or flash lighting and/or neon lighting which draws attention to a tenant space, building, or structure is not permitted.
  • No sign shall be permitted or erected until an illuminated sign has been approved as a special exception use (with stated exception for certain low-level signs).
  • No sign shall be permitted on any premises, improved or unimproved, except as relating to that property and as permitted by division 2 or 3 of this article or as otherwise allowed in this Code.
  • No person shall paint, paste, print or nail any paper sign or advertisement or notice of any kind on any curbstone, flagstone or other portion of any sidewalk or street or upon any tree, lamppost, hitching post, utility pole, hydrant, bridge, or similar structure within the limits of the town, except by resolution of the town council.
  • No person shall paint, paste, print, or nail any banner, sign, handbill, advertisement or notice of any kind on any private pole, advertising board, sign, or any private structure or building unless he is the owner or lessee of such structure.
  • No sign shall be attached to or placed against a building in such a manner as to prevent ingress or egress through any door or opening that is to be used in event of fire or emergency; nor shall any sign obstruct or be attached to a fire escape.
  • No sign, including those painted or attached, with lettering, illustrations, logos or characters shall be visible from public or private streets in residential districts except as provided in division 2 of this article.
  • Supporting structures for any sign shall not carry any lettering and shall not exceed the maximum allowable sign area.
  • Flags exceeding maximum permitted dimensions or flagpoles exceeding height regulations are only allowed as a special exception, with additional setback requirements.

Exempt Signs in Palm Beach

  • Official traffic signs erected by the town, county, state, United States government and/or any agency thereof within right-of-way lines.
  • Nameplates and identification signs for single-family dwellings do not require the name of manufacturer or producer on the sign.
  • A permit and architectural/landmarks review are NOT required for the following types of temporary signs if otherwise compliant: a. Identification of sale or rental signs for single family, two-family, and multi-family dwellings permitted in R or commercial districts. b. Temporary political signs or other temporary noncommercial signs in R or commercial districts. c. Development signs. d. Artisan signs. e. Menu signs in commercial districts. f. Temporary display signs in commercial districts.
  • Legal notices required by law are exempt from the provision against painting, pasting, or nailing signs in certain places.

Sign Plan & Submission Notes for Palm Beach

  • All signs may only be erected and maintained as authorized and in compliance with this article and other applicable ordinances; all signs are subject to the Florida Building Code and Fire Prevention Code.
  • A permit and review by the architectural review commission or landmarks preservation commission (if applicable) is required for all signs except for specific exempted temporary signs.
  • Approval by the town council at a town council meeting is required for governmental signs regarding their number, size, location, appearance, and content.
  • Illuminated (lighted) signs require approval as a special exception use (see sections 134-227 through 134-233), except for low-level illuminated signs indicating street number and entrance/exit drives of parking areas.

Source: municode municipal code