Questions? Call us at (262) 218-2915

Sign Regulations in Palm Shores, Florida

Palm Shores, Florida has specific sign regulations covering 15 sign types across 3 zoning districts. Regulated sign types include Government Sign, Temporary Sign, Flag Sign (Government Flags Only). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Palm Shores, Florida

Sample Sign Requirements in Palm Shores

Sign TypeMax HeightMax AreaSetback
Temporary SignNot listed4 square feet unless otherwise specifiedNot listed
Flag Sign (Government Flags Only)Flagpole: 32 feetFlag area ≤ 25% of height of flagpole15 foot setback from property lines; 25 foot setback from intersections
Banner, Pennant and SimilarNot listedPermanent: 18 sq ft per sign; Temporary: 18 sq ft per sign; Cumulative max 100 sq ft per propertyNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Palm ShoresFull Coverage

Sign Types Covered

15

  • Government Sign
  • Temporary Sign
  • Flag Sign (Government Flags Only)
  • Banner, Pennant and Similar
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Palm Shores, the height limit for Ground Sign or Projecting Sign in the Commercial, professional and institutional districts is 25 ft (Sec. 153.011(B)(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Palm Shores require a permit. From the submission notes on this page: A separate application and permit is required for each separate sign. Run a code check for an exact address to see the permit requirements for that zone.

Palm Shores's sign code covers 15 sign types, including Government Sign, Temporary Sign, Flag Sign (Government Flags Only), and Banner, Pennant and Similar. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Changing the advertising copy or message on an existing, approved, painted or printed sign, changeable copy sign, or similar approved sign does not require a permit. The full list is on this page.

This page doesn't list a single setback distance for signs in Palm Shores. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Palm Shores's sign ordinance that cover digital, changing, or flashing signs: Spectacular or animated and intensely lighted signs, including those animated by flashing, scintillating, blinking or traveling lights or any other means not providing constant illumination, are prohibited, except public information message centers showing time and temperature. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Palm Shores Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Palm Shores, Florida, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Palm Shores, Florida Sign Rules at a Glance

Palm Shores, Florida regulates 15 sign types across 3 zoning districts. Ground Sign or Projecting Signs in the Commercial, professional and institutional districts are capped at 25 ft tall, 100 sq ft, and 25 ft wide (Sec. 153.011(B)(1)). Most commercial signs in Palm Shores require a permit.

Detailed Sign Ordinance Requirements for Palm Shores, Florida

Sign Rules by Zoning District in Palm Shores (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones4Flagpole: 32 feetFlag area ≤ 25% of height of flagpoleNot listed
Residential Districts4Ground-mounted: 4 ft above ground. Building-mounted: flush, not above roof line.102 sq ft (aggregate)Not listed
Commercial, professional and institutional districts725 ft100 sq ftNot listed

Zone-by-Zone Sign Requirements in Palm Shores

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Government SignNot listedNot listedNot listedNot listedNot listedAllowed in all zoning districts; location may vary by signage purpose (address marking, warnings, traffic control, government flags).Not listedUnlock§ 153.009(A)
Temporary SignNot listed4 square feet unless otherwise specifiedNot listedNot listed1 per 0.25 acre for elections; 1 per property for real estate/open house; max 2 per 0.25 acre at any one time plus 1 window signOn owner's property (locations vary by event/use/size); see additional requirements.Not listedUnlock§ 153.009(B)
Flag Sign (Government Flags Only)Flagpole: 32 feetFlag area ≤ 25% of height of flagpoleNot listed15 foot setback from property lines; 25 foot setback from intersections3 flagpoles per parcel, with 1 flag eachOn private property; see setback requirements. Only government-adopted flags allowed as signs.Not listedUnlock§ 153.010(B)(13)
Banner, Pennant and SimilarNot listedPermanent: 18 sq ft per sign; Temporary: 18 sq ft per sign; Cumulative max 100 sq ft per propertyNot listedNot listed2 permanent displays per frontage; temporary: as permitted by spacing and area rulesNot attached to any building; separated by at least 50 feet; on private property only.Not listedUnlock§ 153.010(B)(9)

Residential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
General Residential SignGround-mounted: 4 ft above ground. Building-mounted: flush, not above roof line.4 sq ft per property (or 2 sq ft per dwelling unit, max 12 sq ft, for attached dwellings)Not listedNot listedNot listedAnywhere on premises, except for platted development entrance signs, see below.Not listedUnlock§ 153.011(A)(1)-(4)
Platted Residential Development Entrance Sign (4 acres or less)Not listed32 sq ft (aggregate)Not listedNot within 10 ft of a street right-of-way; not in required side yardTotal aggregate sign area appliesAt entrance(s) of development; not in required side yard or within 10 ft of right-of-way.Not listedUnlock§ 153.011(A)(1)(b)1, § 153.011(A)(2)
Platted Residential Development Entrance Sign (over 4 acres but less than 40 acres)Not listed48 sq ft (aggregate)Not listedNot within 10 ft of a street right-of-way; not in required side yardTotal aggregate sign area appliesAt entrance(s) of development; not in required side yard or within 10 ft of right-of-way.Not listedUnlock§ 153.011(A)(1)(b)2, § 153.011(A)(2)
Platted Residential Development Entrance Sign (40 acres or more)Not listed102 sq ft (aggregate)Not listedNot within 10 ft of a street right-of-way; not in required side yardTotal aggregate sign area appliesAt entrance(s) of development; not in required side yard or within 10 ft of right-of-way.Not listedUnlock§ 153.011(A)(1)(b)3, § 153.011(A)(2)

Commercial, professional and institutional districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign or Projecting Sign25 ft100 sq ft25 ftNot listed1 per street frontage1 per street frontage; both signs on corner lots may not exceed max area for total frontage.Not listedUnlock§ 153.011(B)(1)
Wall Sign (Building End Perpendicular to Street)Not listed96 sq ftNot listedNot listedOne per end of building perpendicular to streetOn each end of building perpendicular to road/streetNot listedUnlock§ 153.011(B)(2)
Wall Sign (Parallel to Street)Not listed96 sq ftNot listedNot listedOneOn building wall parallel to streetNot listedUnlock§ 153.011(B)(3)
Marquee SignNot listed96 sq ftNot listedNot listedOneParallel to road or streetNot listedUnlock§ 153.011(B)(4)
Freestanding Sign (Perpendicular to Road or Street)Not listed96 sq ftNot listedNot listedOnePerpendicular to road or streetNot listedUnlock§ 153.011(B)(5)
Directional Sign for Dead End StreetsNot listed16 sq ftNot listedNot listedOneAt closest street intersection (for businesses on dead end streets); subject to Town Council approval.Not listedUnlock§ 153.011(B)(6)
Non-permanent Ground SignNot listed4 sq ftNot listedNot listedOneOn property of business establishment.Not listedUnlock§ 153.011(B)(7)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Palm Shores with a free PermitPal account.

Run a free code check

Prohibited Signs in Palm Shores

  • Signs are prohibited in all districts unless constructed pursuant to a valid building permit when required and authorized under the code.
  • Spectacular or animated and intensely lighted signs, including those animated by flashing, scintillating, blinking or traveling lights or any other means not providing constant illumination, are prohibited, except public information message centers showing time and temperature.
  • Streamers, balloons, and twirling signs are not permitted, except as may be otherwise authorized by the chapter.
  • Rotating signs or message devices having rotating or spinning parts, and signs with moving copy, are not permitted.
  • No sign may be placed on any curb, sidewalk, post, pole, hydrant, bridge, tree or any other surface located on public property or right-of-way or over/across any street or public thoroughfare, except as may otherwise be authorized by the chapter; such signs are considered litter and may be removed by the town without notice.
  • Swinging signs, suspended by chains or devices allowing the sign to swing, are prohibited.
  • A-frame or sandwich board signs are prohibited.
  • Marquee signs are prohibited in the town.
  • Signs bearing obscene or pornographic statements/pictures, or obviously untruthful advertising matter, are prohibited.
  • Signs painted or attached to any fence or wall not part of a building, except as authorized, are prohibited.
  • Signs employing any motion picture projection or media in conjunction with advertising, having visible moving parts, or giving an illusion of motion (unless otherwise authorized), are prohibited.
  • Signs emitting audible sound, odor, or visible matter are prohibited.
  • Signs imitating or resembling official traffic signs/signals, or bearing words like “stop,” “go slow,” “caution,” “danger,” “warning,” or similar, or which may be confused with or obscure such signs/signals, are prohibited.
  • Pennants, banners, and the like are limited: no more than two permanent displays per property frontage spaced by at least 50 feet; additional temporary displays allowed only with 50-feet spacing, size limits, and permit/seasonal restrictions.
  • Roof signs are not permitted.
  • Off-site signs are prohibited, except as otherwise authorized.
  • Billboards are prohibited, except as otherwise authorized.
  • Flags used to attract public attention are prohibited, except for those adopted as official symbols of government; additional restrictions apply to flagpoles and flag sizes.
  • No motor vehicle or trailer with a painted or mounted sign shall be parked such that the sign is visible from a public street abutting the front of the premises, except in defined circumstances.
  • Signs which have lost nonconforming status become illegal and are subject to removal.

Exempt Signs in Palm Shores

  • Changing the advertising copy or message on an existing, approved, painted or printed sign, changeable copy sign, or similar approved sign does not require a permit.
  • Signs erected by governmental entities for the purpose of promoting the town or other government purposes, including traffic control, regulatory, street, danger, and public utility/safety signs erected by town officials in the performance of public duty, are exempt from permitting.
  • Temporary maintenance activities such as repainting, cleaning, or other normal maintenance and repairs not involving structural changes do not require a permit.
  • Permits are not required for signs for which permits have previously been issued, provided no modifications are made.
  • Certain signs specifically authorized under § 153.009(A) and (B) (such as government signs, address numerals, required warning/prohibition signage, and federal/state/local government flags) are exempted.

Sign Plan & Submission Notes for Palm Shores

  • A separate application and permit is required for each separate sign.
  • For detached and projecting signs, plans must be prepared and signed by a professional engineer licensed in the state.
  • Sign permit applications must include scaled drawings with dimensions and site location details; may also require a survey for siting or tree issues.
  • Written consent from the property owner or agent is required for all sign applications.
  • A variance from the requirements (height, area, location, duration, or number of signs) may be granted by the Town Council upon application and finding of unnecessary and undue hardship or constitutional conflict.
  • Variances and waivers require application to the Town Council and may be subject to a public meeting/agenda process; the Mayor and Town Attorney may act in certain expedited waiver situations.