Sign Regulations in Parkland, Florida
Parkland, Florida has specific sign regulations covering 16 sign types across 2 zoning districts. Regulated sign types include Flagpole/Flag, Nameplate Sign, Private Warning/Safety Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Parkland, Florida
Sample Sign Requirements in Parkland
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Flagpole/Flag | Flagpole: 25 ft | Flag on flagpole: 24 sq ft; Flag on angled building pole: 15 sq ft | Equal to height of pole or required district setback, whichever is greater. |
| Nameplate Sign | Not listed | 1.5 sq ft | Not listed |
| Private Warning/Safety Sign | Not listed | 4 sq ft per sign; up to 16 sq ft total per property | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
16
- Flagpole/Flag
- Nameplate Sign
- Private Warning/Safety Sign
- Noncommercial On-site Directional Sign
- +2 more types
Zoning Districts
2
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Parkland
Other Cities in Florida
Frequently Asked Questions
In Parkland, the height limit for Temporary Sign (general noncommercial) in the Residential districts and other zoning districts is 6 ft above edge of pavement (Sec. 100-1540.G). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Parkland require a permit. From the submission notes on this page: Applications for sign permits required by this article shall be filed with the city in conformance with an approved development plan. Run a code check for an exact address to see the permit requirements for that zone.
Parkland's sign code covers 16 sign types, including Flagpole/Flag, Nameplate Sign, Private Warning/Safety Sign, and Noncommercial On-site Directional Sign. Most commercial signs need a permit. The ordinance lists 2 exemptions. One of them: Government signs on government property, including city, county, or State of Florida property, and traffic control devices, are not regulated by this article. The full list is on this page.
In Parkland, Monument Sign in the Commercial zoning districts and other zoning districts must be set back 6 ft from property lines. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Parkland's sign ordinance that cover digital, changing, or flashing signs: Animated signs. Flashing signs. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Parkland Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Parkland, Florida, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Parkland, Florida Sign Rules at a Glance
Parkland, Florida regulates 16 sign types across 2 zoning districts. Nameplate Signs in the Residential districts and other zoning districts are capped at 1.5 sq ft (Sec. 100-1530.C). Most commercial signs in Parkland require a permit.
Detailed Sign Ordinance Requirements for Parkland, Florida
Sign Rules by Zoning District in Parkland (2 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential districts, Multifamily districts, Master-planned residential developments | 9 | Flagpole: 25 ft | Flag on flagpole: 24 sq ft; Flag on angled building pole: 15 sq ft | Not listed |
| Commercial zoning districts, Industrial zoning districts, Business zoning districts, Community facility zoning districts, Open space/recreation zoning districts, Nonresidential districts, Nonagricultural districts | 15 | Flagpole: 25 ft (greater if camouflaging cellular tower, see table) | 32 – 58 sq ft per sign face (see frontage formula) | Not listed |
Zone-by-Zone Sign Requirements in Parkland
Residential districts, Multifamily districts, Master-planned residential developments
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Flagpole/Flag | Flagpole: 25 ft | Flag on flagpole: 24 sq ft; Flag on angled building pole: 15 sq ft | Not listed | Equal to height of pole or required district setback, whichever is greater. | Residential parcels >2 acres: 2 flagpoles; others: 1. | On lot/parcel. Setback: minimum equal to pole height or required district setback, whichever is greater. | Not listed | Unlock | Sec. 100-580.A-D |
| Nameplate Sign | Not listed | 1.5 sq ft | Not listed | Not listed | 1 per dwelling unit | For each dwelling unit | Not listed | Unlock | Sec. 100-1530.C |
| Noncommercial On-site Directional Sign | Not listed | 3 sq ft | Not listed | Not listed | As needed or required | Common areas (master-planned developments), as needed | Not listed | Unlock | Sec. 100-1530.E; Sec. 100-1060 |
| Temporary Real Estate Sign | 3.5 ft above crown of abutting road | 3 sq ft (main), 8 in x 24 in (additional when open for inspection) | Not listed | Not listed | 1 per plot (plus 1 add. attached sign when applicable) | 1 per plot | Not listed | Unlock | Sec. 100-1540.B |
| Temporary Model Home/Planned Dev Sign | Entrance sign: 6 ft max above edge of pavement | 6 sq ft per sign for model home; Entrance sign: 32 sq ft; Amenity sign: 6 sq ft | Not listed | Entrance: none; All others: 100 ft from public ROW | Entrance: 1 per side; Model: 1 per home + 1 when open; Amenity: 1 per amenity | Adjacent to model homes; at development entrances; adjacent to amenities | Not listed | Unlock | Sec. 100-1540.C |
| Temporary Sign (general noncommercial) | 6 ft above edge of pavement | 6 sq ft per property; +12 sq ft allowed before/after elections (90 days prior, 7 days after) | Not listed | Not listed | Not listed | On private property | Not listed | Unlock | Sec. 100-1540.G |
| Temporary Window Sign | Not listed | 15% of window area (50% for business districts, but if in residential, limit is 15%) | Not listed | Not listed | Not listed | Window or adjacent to window | Not listed | Unlock | Sec. 100-1540.E |
| Temporary Sign for Development Project | 6 ft | Single-family attached/detached: 6 sq ft; other development: 32 sq ft | Not listed | Not listed | 1 per project | Freestanding, per project with active building permit | Not listed | Unlock | Sec. 100-1540.D |
Commercial zoning districts, Industrial zoning districts, Business zoning districts, Community facility zoning districts, Open space/recreation zoning districts, Nonresidential districts, Nonagricultural districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Flagpole/Flag | Flagpole: 25 ft (greater if camouflaging cellular tower, see table) | Flag on flagpole: 24 sq ft; Flag on angled building pole: 15 sq ft; If cellular tower camouflage, see table (up to 216 sq ft for pole ≥70 ft) | Not listed | Setback equal to pole height or required zone setback, whichever is greater. | Max 2 flagpoles (1 flag each) or 1 flagpole (2 flags); or 2 flags on building | On property; on building if not on pole (max 2 flags) | Not listed | Unlock | Sec. 100-580.C-D, F |
| Monument Sign | 6 – 8 ft (see ROW width) | 32 – 58 sq ft per sign face (see frontage formula) | Not listed | 6 ft from property lines; 25 ft from corners/intersections; not in sight visibility triangle | Max 1 per frontage (≤750 ft); 2 per frontage (≥751 ft) | Setback: min 6 ft from property lines; 25 ft from corner/intersection, not in visibility triangle | Not listed | Unlock | Sec. 100-1510.A.3(c-j), Sec. 100-1530.F |
| Wall Sign | Not listed | Per sign plan; not specified | Not listed | Not listed | 1 per façade per space; additional for secondary/corner/service entrance as applicable | On wall façade of leased/occupied space. Service entrance sign at rear or side service entrance. | Not listed | Unlock | Sec. 100-1510.A.4; Sec. 100-1530.F.2 |
| Marquee Sign | Not listed | Same as Wall Sign | Not listed | Not listed | 1 per main entrance; 2 if corner/outparcel | Attached to or hung from a canopy/covered structure over main entrance | Not listed | Unlock | Sec. 100-1530.F.2 |
| Window Sign (Permanent) | 8 in letter height max | 15% of total window area; illuminated sign 3 sq ft in addition | Not listed | Not listed | Not specified; subject to area rules | Inside/on window, ground floor, commercial zoning districts | Not listed | Unlock | Sec. 100-1530.F.1 |
| Under-Canopy Sign | Not listed | 4 sq ft | Not listed | Not listed | 1 per main entrance/storefront | Mounted perpendicularly, minimum 8 ft above walkway, under canopy/awning | Not listed | Unlock | Sec. 100-1530.F.5 |
| Temporary Real Estate Sign | 3.5 ft above crown of abutting road | 3 sq ft (main), 8 in x 24 in (additional when open for inspection) | Not listed | Not listed | 1 per plot (plus 1 add. attached sign when applicable) | 1 per plot | Not listed | Unlock | Sec. 100-1540.B |
| Temporary Sign for Development Project | 6 ft | Single-family attached/detached: 6 sq ft; other development: 32 sq ft | Not listed | Not listed | 1 per project | Freestanding, per project with active building permit | Not listed | Unlock | Sec. 100-1540.D |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Parkland with a free PermitPal account.
Run a free code checkProhibited Signs in Parkland
- Animated signs.
- Permanent sandwich-type signs.
- Snipe signs.
- Permanent banner signs.
- Exposed neon tubes or bare bulb signs placed in geometric forms to outline structures, roofs, windows or doors in such a manner as to attract attention.
- Permanent signs illuminated from outside the boundaries of the sign, where the bulb or other source of light within any lighting fixture is visible from any abutting right-of-way or any adjacent property, or otherwise not shielded, designed, oriented or a combination of these as appropriate to obscure the light source from view and minimize glare.
- Roof signs.
- Billboards.
- Box or cabinet signs.
- Vehicle signs with a total sign area on any vehicle in excess of ten (10) square feet, when the vehicle: 1. Is parked for more than sixty (60) consecutive minutes within one hundred (100) feet of any street right-of-way; 2. Is visible from the street right-of-way that the vehicle is within one hundred (100) feet of.
- Projecting signs.
- Pole signs.
- Painted wall signs and any signs not conforming to the size limitations in section 100-1530, permanent signs: location, or the other applicable standards of this article.
- Flashing signs.
- Any sign located in a sight visibility triangle.
- Off-premises signs.
- Abandoned signs.
- Wind signs.
- Inflatable balloons displaying advertising.
- Revolving or rotating signs.
- Signs that emit audible sound, odor, or visible matter, such as smoke or steam.
- Signs that cover, interrupt or disrupt the major architectural features of a building.
- Signs that resemble any official sign or marker erected by any governmental agency, the position, shape or color of which would conflict with the proper functioning of any traffic sign or signal, or the size, location, movement, color or illumination of which may be reasonably confused with, construed as, or conceal a traffic control device, thereby creating a safety hazard.
- Words and symbols associated with traffic control on signs that are not traffic control devices and that interfere with, mislead or confuse traffic, such as, but not limited to, 'stop,' 'look,' 'caution,' 'danger' or 'slow,' thereby creating a safety hazard.
- All other signs that are not specifically permitted or exempted in this sign code.
- No sign shall be displayed or erected on property without the express permission of the property owner or the person in legal possession of the property.
- All signs must be removed immediately upon discontinuance of their intended or approved use.
Exempt Signs in Parkland
- Government signs on government property, including city, county, or State of Florida property, and traffic control devices, are not regulated by this article.
- The following signs are exempt from sign permit requirements, though must still comply with other standards: Private warning and safety signs; Noncommercial on-site directional signs; Nameplate signs; Required street addresses; Flags; Window signs; Temporary signs as set forth in section 100-1540; Changes to the copy of an existing sign that do not require a building permit.
Sign Plan & Submission Notes for Parkland
- Applications for sign permits required by this article shall be filed with the city in conformance with an approved development plan.
- Applications for wall signs which conform to criteria and standards previously approved by the city commission as part of a uniform sign program for a given commercial development may be approved administratively within fifteen (15) days of receipt of a complete permit application without further review by the planning and zoning board and city commission.
- All other sign permit applications and Community Appearance Board reviews of temporary signs inside a planned residential development shall be subject to review by the planning and zoning board and city commission.
- For any integrated multi-tenant commercial or industrial development in the city, a uniform sign program shall be established and approved by the city commission serving as the community appearance board.
- Uniform sign programs for developments that include one or more multiple-tenant monument signs shall provide standards to ensure the compatibility of lettering styles, sizes and colors, and to ensure that there is adequate white (blank) space in between lines of text and bordering the text at the sign edges.
- All uniform sign programs require community appearance board approval.
- Once the city approves a uniform sign program, no further community appearance board approval is required for trademarked deviations if signs comply with all other requirements.
- Except for those sign types identified in subsections A. through D. of section 100-1530, city commission approval is required for all permanent signs through community appearance board approval of a uniform sign program or individual signs for properties exempt from uniform sign program approval.
- All signs under wall signs, under-canopy signs, marquee signs, monument signs, window signs, and on-site wayfinding signs must be approved through a master sign program.
- All under-canopy signs must be shown on the master sign plan and in conformance with the standards contained.
- All flagpoles are required to obtain site plan approval in addition to obtaining a building permit.
- Variance to sign regulations requires recommendation by the planning and zoning board and approval by the city commission via a public hearing.
Source: municode municipal code