Sign Regulations in Leesburg, Georgia
Leesburg, Georgia has specific sign regulations covering 17 sign types across 5 zoning districts. Regulated sign types include Ground Sign, Banner, Streamer and Balloon. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Sign Regulation Overview for Leesburg, Georgia
Sample Sign Requirements in Leesburg
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Ground Sign | 6 feet | 32 square feet (C-4: 32 sq. ft. per side, double-faced allowed) | Must not obstruct vision for motorists; must not be located in or overhang any public right-of-way or easement. |
| Subdivision Sign | 7 feet (including capstones and embellishments) | 25 square feet | Must not be in/overhang public right-of-way, islands, or any easement. |
| Construction Phase Sign | — | 32 square feet | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
17
- Ground Sign
- Banner
- Streamer and Balloon
- Subdivision Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Leesburg
Other Cities in Georgia
Frequently Asked Questions
Sign height limits in Leesburg vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Leesburg, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Leesburg, regulated sign types include Ground Sign, Banner, Streamer and Balloon, Subdivision Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Leesburg vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Leesburg are regulated with specific requirements for brightness, animation, and message duration. Leesburg has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Leesburg Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Leesburg, Georgia — with citations from the municipal code.
No credit card required · Get results in seconds
Leesburg, Georgia Sign Rules at a Glance
Leesburg, Georgia regulates 17 sign types across 5 zoning districts. Ground Signs in the Residential zoning districts, C-4 zoning district zoning district are capped at 6 feet tall and 32 square feet (C-4: 32 sq. ft. per side, double-faced allowed), with a Must not obstruct vision for motorists; must not be located in or overhang any public right-of-way or easement. setback (Sec. Sec. 16.04.2.a.i-ii; 16.05.1; 16.03.9). Most commercial signs in Leesburg require a permit.
Detailed Sign Ordinance Requirements for Leesburg, Georgia
Sign Rules by Zoning District in Leesburg (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential zoning districts, C-4 zoning district | 4 | 7 feet (including capstones and embellishments) | 32 square feet (C-4: 32 sq. ft. per side, double-faced allowed) | — |
| C-1 zoning district, C-2 zoning district, C-3 zoning district, AG zoning district, I zoning district | 9 | 30 feet (arterial), 20 feet (other) | 100 square feet per sign face | — |
| Commercial zoning districts | 3 | — | 48 sq. ft. | — |
| Industrial zoning districts | 2 | — | 48 sq. ft. | — |
| General Regulations For All Zones | 2 | Height of tallest structure on lot + 10 ft, max 60 ft | 150 sq. ft. | — |
Zone-by-Zone Sign Requirements in Leesburg(sample of 3 of 5 zones)
Residential zoning districts, C-4 zoning district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign | 6 feet | 32 square feet (C-4: 32 sq. ft. per side, double-faced allowed) | — | Must not obstruct vision for motorists; must not be located in or overhang any public right-of-way or easement. | One per lot. (Subdivision signs: One at each entrance.) | On private property, not in any public right-of-way or easement; must not encroach or overhang public right-of-way. | — | Unlock | Sec. 16.04.2.a.i-ii; 16.05.1; 16.03.9 |
| Subdivision Sign | 7 feet (including capstones and embellishments) | 25 square feet | — | Must not be in/overhang public right-of-way, islands, or any easement. | One per entrance | At each entrance to a subdivision on private property unless city council approves location on public property | — | Unlock | Sec. 16.04.2.a.iii-(a)-(e); 16.05.2.a |
| Construction Phase Sign | — | 32 square feet | — | — | One additional sign allowed during construction phase | On subdivision site | — | Unlock | Sec. 16.04.2.a.iii(f) |
| Wall Sign (Multiple-family residential development, manufactured home park) | 7 feet | 25 square feet | — | — | One per street | On private property, faces a street; one per street if located on more than one street | — | Unlock | Sec. 16.04.2.a.iii(e) |
C-1 zoning district, C-2 zoning district, C-3 zoning district, AG zoning district, I zoning district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign | 30 feet (arterial), 20 feet (other) | 100 square feet per sign face | — | Must not encroach on or overhang public right-of-way | One per street frontage | One per street frontage; must be on private property, not in right-of-way | — | Unlock | Sec. 16.04.3.a; 16.05.2 |
| Ground Sign (Multi-tenant <25,000 sq ft lot) | 25 feet | 32 square feet per sign face, double-faced allowed | — | At least 120 feet from the primary ground sign | One additional double-faced ground sign | Additional sign allowed on premises with 200 ft frontage on arterial or collector, at least 120 ft from primary ground sign | — | Unlock | Sec. 16.04.3.d.i |
| Ground Sign (Multi-tenant 25,000+ sq ft lot) | — | 25K-100K sqft: 175 sq ft per face; 100K-300K sqft: 200 sq ft per face; >300K sqft: 300 sq ft per face | — | No closer than 250 ft from other ground signs on the lot | One per 500 lineal feet of street frontage | One for first 500 lineal feet street frontage, one additional per 500 lineal feet; no closer than 250 ft apart | — | Unlock | Sec. 16.04.3.d.ii |
| Wall Sign | — | 100 sq ft (may be larger for setbacks over 50 ft) | — | — | Multiple allowed on multiple walls; square footage shared (max as above) | On exterior wall, must face street or parking lot. | — | Unlock | Sec. 16.04.3.c.i-iii; 16.05.2 |
| Wall Sign (Setback >50 ft: 50-100 ft) | — | Up to 1.5x standard max, no more than 150 sq ft | — | Setback >50-100 ft | See wall sign general rule | On wall >50-100 feet from ROW | — | Unlock | Sec. 16.04.3.c.ii, table |
| Wall Sign (Setback >100-175 ft) | — | Up to 2x standard max, no more than 200 sq ft | — | Setback >100-175 ft | See wall sign general rule | On wall >100-175 feet from ROW | — | Unlock | Sec. 16.04.3.c.ii, table |
| Wall Sign (Setback >175-250 ft) | — | Up to 2.5x standard max, no more than 250 sq ft | — | Setback >175-250 ft | See wall sign general rule | On wall >175-250 feet from ROW | — | Unlock | Sec. 16.04.3.c.ii, table |
| Wall Sign (Setback >250 ft) | — | Up to 3x standard max, no more than 300 sq ft | — | Setback >250 ft | See wall sign general rule | On wall >250 feet from ROW | — | Unlock | Sec. 16.04.3.c.ii, table |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Flag | Height of tallest structure on lot + 10 ft, max 60 ft | 150 sq. ft. | Flag's longest side no more than 1/4 pole height | — | Up to three per lot | All zones; C-1, C-2, C-3, I have height/area limits | — | Unlock | Sec. 16.05.3 |
| Hanging Sign | — | Counts as wall sign area | — | — | Counts toward wall sign count | Permitted only where wall signs are allowed | — | Unlock | Sec. 16.02, Definitions: Hanging sign |
PermitPal covers all 5 zoning districts in Leesburg. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements — illumination rules, size formulas, and permit requirements for every sign type — with a free account.
Run a code check for your exact address — freeProhibited Signs in Leesburg
- No sign structure shall be placed or maintained except in conformity with the sign ordinance.
- No sign is permitted without the property owner's permission.
- Sign structures are not permitted in the public right-of-way.
- No sign or sign structure on private property shall encroach on or overhang the public right-of-way or any other person's property.
- No sign may use images changing more frequently than once every 20 seconds, or display pictures changing more frequently than once per minute.
- No external or internal illumination that causes confusion with or distraction from any traffic signal or safety device is permitted.
- No sign shall give off light which glares, blinds, or has any other adverse effect on traffic or adjacent properties. Maximum illuminance specified at property lines.
- No sign shall be erected or maintained which obstructs any fire escape, ventilation, or door; nor be attached to a fire escape.
- No sign or sign structure above a height of three feet shall be maintained within 25 feet of the intersection of right-of-way lines of two streets or street/railroad intersections.
- No sign or sign structure shall obstruct the traffic sight line, or the view of vehicles entering the roadway. No sign shall be erected on any traffic island.
- Signs which contain or are an imitation of an official traffic sign or signal, or can be confused with an official traffic sign, are prohibited.
- No work (erection, maintenance, alteration, relocation, repair, painting) on any sign for which a permit has not been obtained.
- Portable signs are prohibited in all zoning classifications.
- Moving signs, or signs with moving parts (including animated signs involving motion or sound; signs with moving words; signs with waving elements, motorized or wind-powered).
- Multiple-message signs are prohibited.
- Roof signs (mounted above a roof or projecting above the roofline) are prohibited.
- Rotating signs (excluding barber poles) are prohibited.
- No sign may depict obscenity, sexual conduct, sexually explicit nudity, or advertise illegal activity.
Exempt Signs in Leesburg
- No permit is required for signs having no electrical connection and a sign face less than 32 square feet in area, though these signs must still comply with all other provisions.
- No permit is required for change of copy, replacement of the sign face, or the repainting, cleaning, or other normal maintenance or repair of a sign structure for which a permit has previously been issued, as long as the sign or structure is not modified or enlarged.
Sign Plan & Submission Notes for Leesburg
- There is no mention of a master sign plan, sign plan, or required variance meeting in this ordinance section. Applications require specific drawings and specifications, but a separate sign plan document beyond the permit application is not listed.
Source: municode municipal code