Questions? Call us at (262) 218-2915

Sign Regulations in Warm Springs, Georgia

Warm Springs, Georgia has specific sign regulations covering 16 sign types across 4 zoning districts. Regulated sign types include Non-commercial Sign, Monument Sign (Subdivision Entrance), Stanchion Sign (>3 acres). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 9, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Warm Springs, Georgia

Sample Sign Requirements in Warm Springs

Sign TypeMax HeightMax AreaSetback
Non-commercial Sign5 ft15 sq. ft. per lotMinimum 5 ft from any right-of-way
Monument Sign (Subdivision Entrance)5 ft25 sq. ft.Not listed
Stanchion Sign (>3 acres)24 ft150 sq. ft.Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Warm SpringsFull Coverage

Sign Types Covered

16

  • Non-commercial Sign
  • Monument Sign (Subdivision Entrance)
  • Stanchion Sign (>3 acres)
  • Stanchion Sign (>=30,000 sq. ft. and <3 acres)
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions

Official Resources for Warm Springs

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Warm Springs, the height limit for Monument Sign in the Nonresidential Zoning Districts is 6 ft. The height limit for Wall Sign in the Nonresidential Zoning Districts is 10 ft (Sec. 24-53(f)(1)-(6)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Warm Springs require a permit. From the submission notes on this page: A variance application may be required for hardship cases involving sign regulations; such variances are heard by the city council. Run a code check for an exact address to see the permit requirements for that zone.

Warm Springs's sign code covers 16 sign types, including Non-commercial Sign, Monument Sign (Subdivision Entrance), Stanchion Sign (>3 acres), and Stanchion Sign (>=30,000 sq. ft. and <3 acres). Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Window signs installed for purposes of viewing from outside the premises are exempt from permit requirements, provided such signs do not exceed 30 percent of available window space. The full list is on this page.

In Warm Springs, Non-commercial Sign in the Residential Zoning Districts must be set back at least 5 ft from any right-of-way. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Warm Springs's sign ordinance that cover digital, changing, or flashing signs: Animated signs are prohibited throughout the city. Run a code check for an exact address to see the rules for that zone.

AI-Powered Research

Ready to Research Warm Springs Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Warm Springs, Georgia, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Warm Springs, Georgia Sign Rules at a Glance

Warm Springs, Georgia regulates 16 sign types across 4 zoning districts. Billboard Signs in the Commercial Zoning Areas,Industrial Zoning Areas are capped at 50 ft tall, 672 sq ft, and 48 ft wide (Sec. 24-53(c)). Most commercial signs in Warm Springs require a permit.

Detailed Sign Ordinance Requirements for Warm Springs, Georgia

Sign Rules by Zoning District in Warm Springs (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Zoning Districts25 ft25 sq. ft.Not listed
Nonresidential Zoning Districts624 ft300 sq. ft. or 10% of wall face, per street-facing wallNot listed
Commercial Zoning Areas,Industrial Zoning Areas450 ft672 sq. ft.Not listed
General Regulations For All Zones425 ft (residential) / 60 ft (commercial, industrial) or primary structure height, whichever is less (residential)30% of window areaNot listed

Zone-by-Zone Sign Requirements in Warm Springs(sample of 3 of 4 zones)

Nonresidential Zoning Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Stanchion Sign (>3 acres)24 ft150 sq. ft.Not listedNot listedOne per parcel per street frontageOn parcel in commercial or industrial zoning areasNot listedUnlockSec. 24-52(1); Sec. 24-53(d)(1); Sec. 24-53(d)(4)
Stanchion Sign (>=30,000 sq. ft. and <3 acres)24 ft90 sq. ft.Not listedNot listedOne per parcel per street frontageOn parcel in commercial or industrial zoning areasNot listedUnlockSec. 24-52(1); Sec. 24-53(d)(2); Sec. 24-53(d)(4)
Stanchion Sign (<30,000 sq. ft.)24 ft70 sq. ft.Not listedNot listedOne per parcel per street frontageOn parcel in commercial or industrial zoning areasNot listedUnlockSec. 24-52(1); Sec. 24-53(d)(3); Sec. 24-53(d)(4)
Monument Sign6 ft60 sq. ft. (including signage and structure)Not listedNot listedOne per parcel per street frontageOn parcel in commercial or industrial zoning areasNot listedUnlockSec. 24-52(2); Sec. 24-53(e)
Wall Sign10 ft300 sq. ft. or 10% of wall face, per street-facing wallNot listedNot listedOne per street-facing wall per tenantOn each street-facing wall in commercial or industrial zoning areasNot listedUnlockSec. 24-53(f)(1)-(6)
Awning Sign10 ft300 sq. ft. or 10% of wall face, per street-facing wallNot listedNot listedOne per street-facing wall per tenantOn each street-facing wall in commercial or industrial zoning areasNot listedUnlockSec. 24-53(f)(1)-(6)

Commercial Zoning Areas,Industrial Zoning Areas

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Billboard Sign50 ft672 sq. ft.48 ftNot listedNot within 1,000 ft of another billboardOn parcels adjacent to designated state or federal highways only, oriented towards those highways.Not listedUnlockSec. 24-53(c)
Freestanding Sign (Aggregate Limits >3 acres)Not listed300 sq. ft. aggregate for freestanding signsNot listedNot listedNot listedParcel in commercial or industrial zoning areas over 3 acresNot listedUnlockSec. 24-53(g)(1), Sec. 24-53(g)(4)-(5)
Freestanding Sign (Aggregate Limits >=30,000 sq. ft. and <3 acres)Not listed180 sq. ft. aggregate for freestanding signsNot listedNot listedNot listedParcel in commercial or industrial zoning areas >=30,000 sq. ft. and <3 acresNot listedUnlockSec. 24-53(g)(2), Sec. 24-53(g)(4)-(5)
Freestanding Sign (Aggregate Limits <30,000 sq. ft.)Not listed100 sq. ft. aggregate for freestanding signsNot listedNot listedNot listedParcel in commercial or industrial zoning area <30,000 sq. ft.Not listedUnlockSec. 24-53(g)(3), Sec. 24-53(g)(4)-(5)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Window SignNot listed30% of window areaNot listedNot listedNot listedInstalled flush with or on a window and intended to be viewed from outsideNot listedUnlockSec. 24-49(5); Sec. 24-57(a)(1)
Flag25 ft (residential) / 60 ft (commercial, industrial) or primary structure height, whichever is less (residential)Not listedFlag hoist side not to exceed 50% of the flagpole heightNot listedUp to two per parcel without permitOn any parcel; no more than two flags displayed without permitNot listedUnlockSec. 24-57(b)
Numeral Sign (Property Identification)4 inches (residential); 10 inches (nonresidential)Not listedNot listedNot listedNot listedOn property to identify address/locationNot listedUnlockSec. 24-57(a)(2)
Seasonal DisplayNot listedNot listedNot listedNot listedNot listedAny parcel, not in public right-of-wayNot listedUnlockSec. 24-57(a)(3)

PermitPal covers all 4 zoning districts in Warm Springs. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Warm Springs

  • Roof signs are prohibited throughout the city.
  • Animated signs are prohibited throughout the city.
  • Mobile signs are prohibited throughout the city.
  • Signs on public rights-of-way other than publicly owned or maintained signs are prohibited.
  • Window signs which exceed 30 percent of the window area are prohibited.
  • Signs which contain words, pictures, or statements which are obscene are prohibited.
  • Signs which simulate an official traffic control or warning sign or hide from view any traffic or street sign, signal or public service sign are prohibited.
  • Signs which emit or utilize in any manner any sound capable of being detected on any traveled road or highway by a person with normal hearing are prohibited.
  • Signs which interfere with road or highway visibility or obstruct or otherwise interfere with the safe and orderly movement of traffic are prohibited.
  • Signs erected by nailing, fastening or affixing the sign in any manner to any tree, post, curve, utility pole, or other structure except as set forth herein are prohibited.

Exempt Signs in Warm Springs

  • Window signs installed for purposes of viewing from outside the premises are exempt from permit requirements, provided such signs do not exceed 30 percent of available window space.
  • Numerals displayed for purposes of identifying property location and not exceeding four inches in height in residential districts and ten inches in height in nonresidential districts are exempt from permit requirements.
  • Seasonal displays located outside of the public right of way that are erected for a maximum period of 30 days no more than twice a year are exempt from permit requirements.
  • Every parcel may display no more than two flags that shall not count toward the maximum aggregate sign area limits without obtaining a permit, subject to flagpole and flag size limits.

Sign Plan & Submission Notes for Warm Springs

  • No master sign plan or sign plan is referenced in this ordinance.
  • A variance application may be required for hardship cases involving sign regulations; such variances are heard by the city council.
  • Registration is required for nonconforming signs within 90 days of the effective date of the ordinance.
  • Permit applications must include a plat map of property showing all existing structures including existing signage, and proposed sign location.

Source: municode municipal code