Sign Regulations in Dover, Idaho
Dover, Idaho has specific sign regulations covering 17 sign types across 3 zoning districts. Regulated sign types include Development Sign, Neighborhood Identification Sign, Temporary Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 19, 2025
Sign Regulation Overview for Dover, Idaho
Sample Sign Requirements in Dover
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign (General) | 5 feet | 6 square feet | — |
| Freestanding Sign (Residential - Suburban, Residential zones only) | 4 feet | 6 square feet | — |
| Small Sign | 5 feet | 6 square feet | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
17
- Development Sign
- Neighborhood Identification Sign
- Temporary Sign
- Freestanding Sign (General)
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Idaho
Frequently Asked Questions
In Dover, monument signs are limited to 5 feet. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.
To get a sign permit in Dover, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Dover, regulated sign types include Development Sign, Neighborhood Identification Sign, Temporary Sign, Freestanding Sign (General), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Dover vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Dover are regulated with specific requirements for brightness, animation, and message duration. Dover has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Dover Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Dover, Idaho sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Dover, Idaho Sign Rules at a Glance
Dover, Idaho regulates 17 sign types across 3 zoning districts. Freestanding Signs in the Commercial zoning district are capped at 6 feet tall and 24 square feet per sign (Sec. 12-11-8 TABLE A, Note 1 and 2). Most commercial signs in Dover require a permit.
Detailed Sign Ordinance Requirements for Dover, Idaho
Sign Rules by Zoning District in Dover (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Agriculture/Rural, Suburban, Residential | 6 | 5 feet | 6 square feet | — |
| Commercial | 9 | 6 feet | 24 square feet per sign | — |
| General Regulations For All Zones | 5 | 35 feet (flagpole) | — | — |
Zone-by-Zone Sign Requirements in Dover
Agriculture/Rural, Suburban, Residential
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Development Sign | — | — | — | — | — | — | — | Unlock | 12-11-8 TABLE A (Development signs); 12-11-7 |
| Freestanding Sign (General) | 5 feet | 6 square feet | — | — | — | Not in public right of way. | — | Unlock | 12-11-4F; 12-11-8 TABLE A (Freestanding); Note 6 |
| Freestanding Sign (Residential - Suburban, Residential zones only) | 4 feet | 6 square feet | — | — | — | Residential only. Not in public right of way. | — | Unlock | 12-11-8 TABLE A, Note 8 |
| Neighborhood Identification Sign | — | — | — | — | — | — | — | Unlock | 12-11-8 TABLE A |
| Small Sign | 5 feet | 6 square feet | — | — | — | — | — | Unlock | 12-11-4F; 12-11-8 TABLE A |
| Temporary Sign | — | 6 square feet | — | — | Up to 3 per lot/parcel (Note 7) | — | — | Unlock | 12-11-4G; 12-11-8 TABLE A Note 7 |
Commercial
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Awning | — | — | — | — | — | — | — | Unlock | 12-11-8 TABLE A, Note 3 |
| Development Sign | — | — | — | — | — | — | — | Unlock | 12-11-8 TABLE A |
| Freestanding Sign | 6 feet | 24 square feet per sign | — | — | Combined sign area of all signs may not exceed 120 sq ft (Note 2) | — | — | Unlock | 12-11-8 TABLE A, Note 1 and 2 |
| Projecting/Suspended Sign | — | 4 square feet | — | — | 1 per use/occupancy with access from canopy/arcade | Attached to buildings with canopies or arcades. Not to project into public right of way. Minimum clearance of 8 ft from adjacent grade. | — | Unlock | 12-11-8 TABLE A, Note 5 |
| Sandwich Board Sign | — | 6 square feet per side | — | — | — | Not in public right of way. | — | Unlock | 12-11-4E; 12-11-8 TABLE A Note 9 |
| Temporary Sign | — | 6 square feet | — | — | Up to 3 per lot/parcel | — | — | Unlock | 12-11-4G; 12-11-8 TABLE A Note 7 |
| Window Sign | — | — | — | — | — | Affixed inside window frame. | — | Unlock | 12-11-4J; 12-11-8 TABLE A, Note 4 |
| Wall Sign | — | Not defined by size, but window/wall/affixed is permitted. Individual wall signs not exceeding 4 sq ft are permit-exempt (12-11-4H); larger require permit. | — | — | — | Affixed parallel to building wall, not above roof/parapet. | — | Unlock | 12-11-4H; 12-11-8 TABLE A (Window, wall, affixed); 12-11-2 Definition |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wayfinding Sign | — | — | — | — | — | Public or private property as permitted. | — | Unlock | 12-11-4I; 12-11-2 Definition |
| Directional/Institutional Sign | — | — | — | — | — | At or near public right of way and on private property. | — | Unlock | 12-11-4B; 12-11-2 Definition |
| Government Sign | — | — | — | — | — | Location as required by law or ordinance. | — | Unlock | 12-11-4C; 12-11-2 Definition |
| Addressing Numbers/Mailboxes | — | — | — | — | — | Affixed to mailbox, building, or as addressing method. | — | Unlock | 12-11-4A |
| Flagpole | 35 feet (flagpole) | — | — | — | — | — | — | Unlock | 12-11-4D |
Illumination rules, size formulas, and permit requirements for every sign type in Dover are available with a free PermitPal account.
Start freeProhibited Signs in Dover
- All signs not expressly permitted by section 12-11-8, table A of this chapter, are prohibited.
- Signs that mimic or simulate traffic control signs or public notices placed by the city or other public agencies.
- Signs that obstruct or interfere with vehicle and pedestrian traffic.
- Signs located in such a manner as to obstruct or interfere with an official traffic sign, signal or device, or obstruct or interfere with a driver's view of approaching, merging or intersecting traffic.
- Oscillating, flashing, rotating, flickering or blinking lights unless otherwise specifically permitted by this title.
- Signs on public property or attached to trees, utility poles, public benches or streetlights, unless authorized by the city or specifically permitted within this title.
- No sign shall be placed in a public right of way, except traffic control or regulatory signs placed by public agencies.
- No sign shall be placed on a tree, utility pole or fence.
- No sign shall be placed on a vehicle or trailer parked in a visible location for the primary purpose of displaying the sign.
- No sign shall be placed where it creates a traffic safety hazard by obstructing vision at an intersection or driveway or obscures traffic control signs.
Exempt Signs in Dover
- No permit shall be required for addressing numbers/mailboxes.
- No permit shall be required for directional or institutional signs that do not advertise a business, including signs identifying publicly accessible facilities, parking lot entrance and exit signs, and those of similar nature.
- No permit shall be required for governmental signs for the control of traffic or other regulatory purposes, or signs of public service companies indicating danger, erected by or on the order of a public officer in the performance of public duty.
- No permit shall be required for flagpoles that do not exceed a height of thirty five feet (35').
- No permit shall be required for sandwich board signs not exceeding six (6) square feet for each side.
- No permit shall be required for small signs, as defined, which shall not be illuminated, animated or contain reader boards.
- No permit shall be required for temporary signs, as defined, not in excess of six (6) square feet and not permanently installed.
- No permit shall be required for wall signs not exceeding four (4) square feet.
- No permit shall be required for wayfinding signs.
- No permit shall be required for window signs.
Sign Plan & Submission Notes for Dover
- All applicable signs, subject to a building permit, shall accompany construction quality stamped plans by an engineer certified in the state to do such work. The plan shall illustrate how the proposed sign is engineered to comply with minimum design criteria, and must be approved by the city engineer or designee.
- Applications for sign permits must include, among other items, a site plan depicting the locations of proposed signage, setbacks from property lines, proposed landscaped areas, and existing remaining signage.
- Construction quality plans of the sign and supporting structures stamped by an engineer certified in the state are required, unless the sign clearly does not require engineering.
- The location, type and size of proposed signs shall be included in materials required for special use permit applications.