Questions? Call us at (262) 218-2915

Sign Regulations in Homedale, Idaho

Homedale, Idaho has specific sign regulations covering 23 sign types across 3 zoning districts. Regulated sign types include Real Estate Sign, Professional Name Plate, Occupant Name/Address Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Homedale, Idaho

Sample Sign Requirements in Homedale

Sign TypeMax AreaSetback
Window Sign20% of window surfaceNot listed
Real Estate Sign6 sq ftNo less than 10' from right-of-way, must not obstruct traffic visibility at intersections (see also 17.60.070.B)
Professional Name Plate4 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HomedaleFull Coverage

Sign Types Covered

23

  • Real Estate Sign
  • Professional Name Plate
  • Occupant Name/Address Sign
  • Temporary Event/Construction Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Homedale

City WebsiteMunicipal Code3 permit application links available

Homedale, Idaho Sign Rules at a Glance

Homedale, Idaho regulates 23 sign types across 3 zoning districts. Freestanding On-Premises Signs in the Commercial Districts, Manufacturing Districts are capped at 30 ft tall and 100 sq ft per display area, set back at least 10' from street right-of-way, 30' from adjoining lot line (Sec. 17.60.060.E). Most commercial signs in Homedale require a permit.

Detailed Sign Ordinance Requirements for Homedale, Idaho

Sign Rules by Zoning District in Homedale (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
General Regulations For All Zones11Not listed20% of window surface
Residential Districts8Not listed50 sq ft
Commercial Districts, Manufacturing Districts830 ft1200 sq ft

Zone-by-Zone Sign Requirements in Homedale

General Regulations For All Zones

Sign TypeMax AreaLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Illuminated SignNot listedNot listedUnlock17.60.030.A, 17.60.030.B
Projecting SignNot listedNo more than distance of sidewalk or six feet (6') from front face of buildingUnlock17.60.030.D
Roof SignNot listedProhibited except if supporting structure is screened to appear as continuation of building face.Unlock17.60.030.E
Portable or Temporary SignNot listedMay not be placed on front/face of building or on premises except as provided in ordinance.Unlock17.60.030.F
Window Sign20% of window surfaceOn or in windows, visible from street or highwayUnlock17.60.030.H
Any Sign on Fire Escape or Access Door/WindowNot listedProhibited on fire escape or any door/window giving access to a fire escape.Unlock17.60.030.I
Sign in Public Right-of-WayNot listedProhibited, except publicly owned signs. Private property wayfinding signs allowed, no advertising permitted.Unlock17.60.030.L
Sign Along Interstate/Primary HighwayNot listedMust comply with Idaho State Transportation Department regulations.Unlock17.60.030.M

Residential Districts

Sign TypeMax AreaSetbackLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Real Estate Sign6 sq ftNo less than 10' from right-of-way, must not obstruct traffic visibility at intersections (see also 17.60.070.B)Premises upon which the sign is locatedUnlock17.60.050.A
Professional Name Plate4 sq ftNot listedNot listedUnlock17.60.050.B
Occupant Name/Address Sign2 sq ftNot listedPremises of occupantUnlock17.60.050.C
Temporary Event/Construction Sign50 sq ftNot listedNot listedUnlock17.60.050.D
Wall Sign (Nonconforming Use)12 sq ftNot listedOn same premises of nonconforming useUnlock17.60.050.E
Political SignNot listedNot listedNot listedUnlock17.60.050.F
Bulletin Board Sign (Institutional Use)15 sq ftNo less than 10' from right-of-way, must not obstruct traffic visibility at intersections (see 17.60.070.B)On premises of institution (church, school, library, museum, social club, society)Unlock17.60.060.A
Commercial Enterprise Sign (Residential District)12 sq ftNot listedOn premises of business, advertising only business on siteUnlock17.60.060.B

Commercial Districts, Manufacturing Districts

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Real Estate SignNot listed12 sq ftNot listedNot listedPremises upon which the sign is locatedUnlock17.60.050.A
Professional Name PlateNot listed4 sq ftNot listedNot listedNot listedUnlock17.60.050.B
Occupant Name/Address SignNot listed2 sq ftNot listedNot listedPremises of occupantUnlock17.60.050.C
Temporary Event/Construction SignNot listed50 sq ftNot listedNot listedNot listedUnlock17.60.050.D
Wall Sign (On-Premises)Not listed100 sq ftNot listed2 per businessOn-premises, on building faceUnlock17.60.060.C
Freestanding On-Premises Sign30 ft100 sq ft per display areaMin 10' from street right-of-way, 30' from adjoining lot line1 per buildingNot closer than 10' to street right-of-way and 30' to adjoining lot lineUnlock17.60.060.E
Off-Premises Sign (Total Location)Not listed600 sq ft (total per location)Not listed2 per locationNot listedUnlock17.60.060.D
Off-Premises Sign (Single Sign)20 ft above closest elevated highway roadway (if viewed from elevated highway)1200 sq ftNot before required setback; setback increased 0.5' per sq ft area above 50 sq ft, max setback 100' (see 17.60.070.A)Not listedNot listedUnlock17.60.060.D

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Homedale with a free PermitPal account.

Run a free code check

Prohibited Signs in Homedale

  • Illuminated signs or lighting devices shall not emit flashing, intermittent, rotating, or moving lights; must emit a light of constant intensity.
  • Illuminated signs or lighting devices shall not direct beams or illumination in a way that causes glare or reflection onto public thoroughfares, highways, sidewalks, or adjacent premises, constituting a traffic hazard or nuisance.
  • Signs shall not employ parts or elements that revolve, rotate, whirl, spin, or otherwise make use of motion to attract attention (except as exempted below).
  • All writing, fittings, and materials used for electrically illuminated signs must comply with the local electric code.
  • Projecting signs shall not extend more than the existing sidewalk width or six feet from the building face, whichever is less.
  • No sign shall be placed on the roof of any building, except where the supporting structure is screened so that the sign appears to be a continuation of the building face.
  • No portable or temporary sign shall be placed on the front or face of a building or on any premises except as otherwise provided in the ordinance.
  • Signs or parts thereof shall not contain or consist of banners, posters, pennants, ribbons, streamers, spinners, or other similar moving devices; such devices and strings of lights shall not be used for advertising or attracting attention unless part of a sign.
  • No window sign visible from any public or private street or highway shall occupy more than twenty percent of the window surface.
  • No sign shall be installed, erected, or attached in any way to a fire escape or any door or window giving access to a fire escape.
  • Signs shall not be placed in any public right-of-way except for publicly owned signs such as traffic control and directional signs.
  • Signs along interstate and primary highways must conform to Idaho State Transportation Department regulations.

Exempt Signs in Homedale

  • The prohibition on flashing, moving, or rotating elements (17.60.030.A and B) does not apply to signs performing a public service function indicating time, temperature, stock market quotes, or similar services.
  • Signs erected and maintained pursuant to governmental functions or required by any law, ordinance, or governmental regulation are excluded from the definition of 'sign' and are exempt from these regulations.
  • Signs directing and guiding traffic and parking on private property, bearing no advertising matter, are permitted on any property.

Sign Plan & Submission Notes for Homedale

  • There is no indication in the provided text that a master sign plan, sign plan, or variance process is explicitly required for any sign type.

Source: municode municipal code

Frequently Asked Questions

In Homedale, the height limit for Freestanding On-Premises Sign in the Commercial Districts, Manufacturing Districts is 30 ft (Sec. 17.60.060.E). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Homedale require a permit. From the submission notes on this page: There is no indication in the provided text that a master sign plan, sign plan, or variance process is explicitly required for any sign type. Run a code check for an exact address to see the permit requirements for that zone.

Homedale's sign code covers 23 sign types, including Real Estate Sign, Professional Name Plate, Occupant Name/Address Sign, and Temporary Event/Construction Sign. Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: Signs directing and guiding traffic and parking on private property, bearing no advertising matter, are permitted on any property. The full list is on this page.

In Homedale, Freestanding On-Premises Sign in the Commercial Districts, Manufacturing Districts must be set back at least 10' from street right-of-way, 30' from adjoining lot line (Sec. 17.60.060.E). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Homedale's sign ordinance that cover digital, changing, or flashing signs: Illuminated signs or lighting devices shall not emit flashing, intermittent, rotating, or moving lights; must emit a light of constant intensity. The prohibition on flashing, moving, or rotating elements (17.60.030.A and B) does not apply to signs performing a public service function indicating time, temperature, stock market quotes, or similar services. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Homedale Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Homedale, Idaho, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds