Questions? Call us at (262) 218-2915

Sign Regulations in Kamiah, Idaho

Kamiah, Idaho has specific sign regulations covering 5 sign types across 3 zoning districts. Regulated sign types include Freestanding Sign, Wall Sign, Wall Sign (Multiple Businesses). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Kamiah, Idaho

Sample Sign Requirements in Kamiah

Sign TypeMax HeightMax AreaSetback
Freestanding Sign12 feet50 square feetNot listed
Sandwich Board Sign (Street)48 inches24 inches by 48 inches (8 sq ft)Street signs must be at least 20 feet from intersections along centerline and 12 feet apart from each other.
Sandwich Board Sign (Sidewalk)48 inches24 inches by 48 inches (8 sq ft)Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for KamiahFull Coverage

Sign Types Covered

5

  • Freestanding Sign
  • Wall Sign
  • Wall Sign (Multiple Businesses)
  • Sandwich Board Sign (Street)
  • +1 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Kamiah, the height limit for Freestanding Sign in the C-1 (Commercial District), Commercial District is 12 feet. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Kamiah require a permit. From the submission notes on this page: A drawing must be submitted to City Hall before a sandwich board ('A' board) sign is made; City Hall staff will approve/disapprove as to the regulation of this chapter. Run a code check for an exact address to see the permit requirements for that zone.

Kamiah's sign code covers 5 sign types, including Freestanding Sign, Wall Sign, Wall Sign (Multiple Businesses), and Sandwich Board Sign (Street). Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Window signs are exempt. The full list is on this page.

In Kamiah, Freestanding Sign in the Industrial zoning district must be set back at least 15 feet from property line (Sec. 17.40.040(B)(1)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Kamiah's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Kamiah Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Kamiah, Idaho, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Kamiah, Idaho Sign Rules at a Glance

Kamiah, Idaho regulates 5 sign types across 3 zoning districts. Freestanding Signs in the C-1 (Commercial District), Commercial District are capped at 12 feet tall and 50 square feet. Most commercial signs in Kamiah require a permit.

Detailed Sign Ordinance Requirements for Kamiah, Idaho

Sign Rules by Zoning District in Kamiah (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
C-1 (Commercial District), Commercial District548 inches50 square feetNot listed
Industrial2Not listedNot listedNot listed
Start free to see 1 more zone

Zone-by-Zone Sign Requirements in Kamiah(sample of 2 of 3 zones)

C-1 (Commercial District), Commercial District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign12 feet50 square feetNot listedNot listed1On the lotNot listedUnlock17.40.040(A)(1), 17.40.050(A)-(E)
Wall SignNot listedNot listedNot listedNot listedMust be reasonable for the area of the wallAttached to building wallNot listedUnlock17.40.040(A)(2), 17.40.050(A)-(E)
Wall Sign (Multiple Businesses)Not listedNot listedNot listedNot listedMust be reasonable for the area of the wallBuilding wallNot listedUnlock17.40.040(A)(3)(a)
Sandwich Board Sign (Street)48 inches24 inches by 48 inches (8 sq ft)24 inchesStreet signs must be at least 20 feet from intersections along centerline and 12 feet apart from each other.1 street and 1 sidewalk sandwich board per business/organizationOn Idaho and Main Streets in the C-1 (Commercial District) zoned section of Kamiah; must be at least 20 feet from any street intersection (centerline), at least 12 feet apart from other sandwich board signs, and not block ingress or egress to business entrances/exits.Not listedUnlock17.40.030(H), Ord. 2018-2, 2018
Sandwich Board Sign (Sidewalk)48 inches24 inches by 48 inches (8 sq ft)24 inchesNot listed1 street and 1 sidewalk sandwich board per business/organizationOn Idaho and Main Streets in the C-1 (Commercial District) zoned section of Kamiah; must not hinder access to business entrances/exits or obstruct less than 48 inches of pedestrian space.Not listedUnlock17.40.030(H), Ord. 2018-2, 2018

Industrial

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding SignNot listedNot listedNot listedMinimum 15 feet from property line1On the lotNot listedUnlock17.40.040(B)(1)
Wall SignNot listedNot listedNot listedNot listedRequirements for multiple occupancies same as Commercial DistrictBuilding wallNot listedUnlock17.40.040(B)(2)

PermitPal covers all 3 zoning districts in Kamiah. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Kamiah

  • No person shall place, maintain, or display upon or in view of any highway any unauthorized sign, signal, marking, or device which purports to be or is an imitation of or resembles an official traffic control device or railroad sign or signal, or which attempts to direct the movement of traffic, or which hides from view or interferes with the effectiveness of any official traffic control device or any railroad sign or signal.
  • No person shall place or maintain nor shall any public authority permit upon any highway any traffic sign or signal bearing thereon any commercial advertising.

Exempt Signs in Kamiah

  • Window signs are exempt.
  • Memorial signs are exempt.
  • Temporary signs or banners are allowed for up to sixty (60) days.
  • Political signs must be removed thirty (30) days after election.
  • Signs advertising the sale, rental or lease of property are exempt, with a limit of two signs per parcel or building, one for owner and one for the realtor.
  • Informational signs are allowed but must be removed seven (7) days following the beginning of the intended use project.
  • Signs required by law are exempt.
  • Temporary sandwich board signs ('A' board) are exempt, provided they comply with detailed standards.

Sign Plan & Submission Notes for Kamiah

  • A drawing must be submitted to City Hall before a sandwich board ('A' board) sign is made; City Hall staff will approve/disapprove as to the regulation of this chapter.
  • A variance to enlarge the signage area may be requested from the Planning and Zoning Commission.
  • All sandwich board signs on the right-of-way of Highway 12 must be approved by the Idaho Department of Transportation and then approved by the City.
  • A business may obtain special approval from the Governing Body for an internally lit sign.