Sign Regulations in Kellogg, Idaho
Kellogg, Idaho has specific sign regulations covering 19 sign types across 4 zoning districts. Regulated sign types include Temporary Sign, Identification/Nameplate Sign, Commemorative Plaque. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 19, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Kellogg, Idaho
Sample Sign Requirements in Kellogg
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Identification/Nameplate Sign | Not listed | 2 sq ft | Not listed |
| Temporary Sign | Not listed | 4 sq ft | Not listed |
| Commemorative Plaque | Not listed | 4 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
19
- Temporary Sign
- Identification/Nameplate Sign
- Commemorative Plaque
- Freestanding Sign (Standard Location)
- +2 more types
Zoning Districts
4
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Idaho
Frequently Asked Questions
In Kellogg, the height limit for Sandwich Board Sign in the Commercial district, Industrial district is 3 ft (Sec. 11-9-8(H)(4)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Kellogg require a permit. From the submission notes on this page: An application for a sign permit must be submitted to and reviewed by the administrator or designee from the Building and Planning Department. Run a code check for an exact address to see the permit requirements for that zone.
Kellogg's sign code covers 19 sign types, including Temporary Sign, Identification/Nameplate Sign, Commemorative Plaque, and Freestanding Sign (Standard Location). Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: Temporary signs are exempt from permit requirements so long as the specified conditions and standards are met. The full list is on this page.
This page doesn't list a single setback distance for signs in Kellogg. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Rules in Kellogg's sign ordinance that cover digital, changing, or flashing signs: No sign may contain or be illuminated by repeated, strobe-like flashing or intermittent lights or lights changing degrees of intensity. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Kellogg Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Kellogg, Idaho, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Kellogg, Idaho Sign Rules at a Glance
Kellogg, Idaho regulates 19 sign types across 4 zoning districts. Sandwich Board Signs in the Commercial district, Industrial district are capped at 3 ft tall and 2 ft wide (Sec. 11-9-8(H)(4)). Most commercial signs in Kellogg require a permit.
Detailed Sign Ordinance Requirements for Kellogg, Idaho
Sign Rules by Zoning District in Kellogg (4 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential zones, Residential districts | 3 | Not listed | 4 sq ft | Not listed |
| Commercial district, Industrial district | 9 | No more than 10 ft above roofline or 1/3 of building height, whichever is less | No more than 75% of the total transparent portion of window | Not listed |
| C-B, Central Business District | 3 | Not listed | Not listed | Not listed |
| General Regulations For All Zones | 5 | Not listed | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Kellogg(sample of 3 of 4 zones)
Residential zones, Residential districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Identification/Nameplate Sign | Not listed | 2 sq ft | Not listed | Not listed | 2 | Customarily associated with residential use (e.g., property identification, names, mailbox, private parking, warning signs). | Not listed | Unlock | 11-9-8(D)(1) |
| Temporary Sign | Not listed | 4 sq ft | Not listed | Not listed | Not listed | On residential lot. | Not listed | Unlock | 11-9-8(D)(8)(a) |
| Commemorative Plaque | Not listed | 4 sq ft | Not listed | Not listed | Not listed | On or near structure/object being commemorated. | Not listed | Unlock | 11-9-8(D)(6) |
Commercial district, Industrial district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign (Standard Location) | Not listed | Not listed | Not listed | Within required yard area, per visibility requirements. | 1 per business/location | Entirely within required yard area; must not obstruct public walkways or vehicular visibility. | Not listed | Unlock | 11-9-8(G)(1), (H)(1), (J)(9) |
| Freestanding Sign (Freeway Location) | Not listed | Not listed | Not listed | Within required yard area, per visibility requirements. | 1 per business/location | Entirely within required yard area; must not obstruct public walkways or vehicular visibility. | Not listed | Unlock | 11-9-8(G)(1), (H)(1) |
| Wall Sign | Not listed | No greater than 50% of total wall surface; included in total sign surface area calculation. | Not listed | Not listed | Not listed | On or attached to building wall; max projection 12 inches, awning signs max 4 feet from building face. | Not listed | Unlock | 11-9-8(G)(2), (I) |
| Window Sign | Not listed | No more than 75% of the total transparent portion of window | Not listed | Not listed | Not listed | On or painted on the exterior window. | Not listed | Unlock | 11-9-8(G)(3) |
| Projecting or Hanging Sign | Not listed | 10 sq ft (total area of all projecting signs) | Not listed | Not listed | Not listed | Affixed to building; projects from building face. | Not listed | Unlock | 11-9-8(G)(4), (H)(2) |
| Roof Sign | No more than 10 ft above roofline or 1/3 of building height, whichever is less | Not listed | Not listed | Not listed | Not listed | On roof, extends vertically above highest roof portion. | Not listed | Unlock | 11-9-8(H)(3) |
| Sandwich Board Sign | 3 ft | Not listed | 2 ft | Not listed | 1 per business/location | On sidewalk or on premises within frontage of property near entrance; must maintain 5 ft continuous sidewalk clear zone. | Not listed | Unlock | 11-9-8(H)(4) |
| Temporary Sign | Not listed | 32 sq ft | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 11-9-8(D)(8)(a) |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Government Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Erected by or on behalf of a governmental body. | Not listed | Unlock | 11-9-8(D)(2) |
| Flag, Banner, Pennant, or Insignia of Governmental Organization | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 11-9-8(D)(3) |
| Decorative/Architectural Feature (not advertising) | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 11-9-8(D)(4) |
| Directional/Traffic Control (Private Property) | Not listed | Not listed | Not listed | Not listed | Not listed | On private property. | Not listed | Unlock | 11-9-8(D)(5) |
| Interior Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Within a building. | Not listed | Unlock | 11-9-8(D)(7) |
PermitPal covers all 4 zoning districts in Kellogg. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Kellogg
- No sign may be constructed, erected, enlarged, illuminated, or substantially altered except in accordance with the provisions of this chapter and the Building Code.
- No sign may be located so that it interferes with the view necessary for motorists to proceed safely through intersections or to enter onto or exit from public streets or private roads.
- Portable signs are prohibited, with the exception of sandwich signs.
- No sign may be erected so that by its location, color, size, shape, nature, or message it would tend to obstruct the view of, or be confused with, official traffic signs or other signs erected by governmental agencies.
- Unless otherwise specified in this chapter, no sign larger than four (4) square feet shall be permitted in a residential district.
- Wiring for lighted signs shall be installed in accordance with the Electrical Code as amended and adopted by Idaho Electrical Board.
- Freestanding signs shall be securely fastened to the ground or to some other supportive structure so that they may not be moved by the wind or other forces of nature.
- Permanent off-premises signs are prohibited except for specified exceptions.
- Commercial signs are prohibited in residential zones.
- No development may be allotted more than one freestanding sign per business or location.
- No sign may contain or be illuminated by repeated, strobe-like flashing or intermittent lights or lights changing degrees of intensity.
- Nonconforming signs may not be moved, altered, expanded, or replaced except to bring the sign into complete conformity with this title.
- Abandoned signs on properties vacant or unoccupied for 2 months or signs pertaining to events that no longer apply shall be deemed abandoned.
Exempt Signs in Kellogg
- Signs not exceeding two (2) square feet in area that are customarily associated with residential use (e.g., property identification names or numbers, occupant names, mailbox and newspaper tube ID, private property parking or warning signs about trespassing or animals), limited to two such signs.
- Signs erected by or on behalf of a governmental body, including legal notices, identification and informational signs, and traffic, directional, or regulatory signs.
- Flags, banners, pennants, or insignia of any governmental organization.
- Integral decorative or architectural features of buildings, including building names and dedication dates, or works of art, so long as such features or works do not contain letters or numbers (except in case of building names and dedication dates).
- Signs directing and guiding traffic on private property.
- Commemorative plaques that do not exceed four (4) square feet, are permanently affixed to or near the structure or object they commemorate.
- Signs inside a building, that are part of decoration, or displays applied or attached to the interior of a window or located on the interior and visible through the window.
- Temporary signs are exempt from permit requirements so long as the specified conditions and standards are met.
- Informational signs placed by nonprofit or civic organizations about community events, public services, or attractions (if in compliance with the specified size and placement standards).
Sign Plan & Submission Notes for Kellogg
- An application for a sign permit must be submitted to and reviewed by the administrator or designee from the Building and Planning Department.
- Applications must include details such as names, addresses, sign description, drawing, and any other information required for the particular type of sign or as required by administrator or City Council.
- A building permit is specifically required for roof signs.
- Administrative approval may be required for some variations, e.g., different sized sandwich board signs placed on private property.
- A permit granted by City Council is required for banners installed in or over public right-of-way.