Sign Regulations in Chicago Heights, Illinois
Chicago Heights, Illinois has specific sign regulations covering 16 sign types across 8 zoning districts. Regulated sign types include Wall Sign, Awning Sign, Monument Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Chicago Heights, Illinois
Sample Sign Requirements in Chicago Heights
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign | 6 ft | 8 sq ft | Not listed |
| Monument Sign | 6 ft | 12 sq ft | Min. 2 ft from property line |
| Awning Sign | 6 ft | 8 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
16
- Wall Sign
- Awning Sign
- Monument Sign
- Projecting Sign
- +2 more types
Zoning Districts
8
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Chicago Heights
Other Cities in Illinois
Frequently Asked Questions
In Chicago Heights, the height limit for Monument Sign in the Manufacturing District (M-2, M-3) is 12 ft. The height limit for Wall Sign in the Mixed-Use District (MX) is 10 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Chicago Heights require a permit. From the submission notes on this page: No explicit mention of a master sign plan, sign plan, or variance process is found in the provided text for routine signage, although some sign types (e.g., outdoor advertising signs) require a special use permit in addition to a sign and building permit. Run a code check for an exact address to see the permit requirements for that zone.
Chicago Heights's sign code covers 16 sign types, including Wall Sign, Awning Sign, Monument Sign, and Projecting Sign. Most commercial signs need a permit. The ordinance lists 13 exemptions. One of them: Directional signs for vehicular ingress/egress to parking facilities, meeting specified size, height, quantity, and setback requirements (a permit required for these). The full list is on this page.
In Chicago Heights, Monument Sign in the Mixed-Use District (MX) must be set back at least 2 ft. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Chicago Heights's sign ordinance that cover digital, changing, or flashing signs: Flashing signs, flashing or moving lights on signs, and reflective pennants are prohibited, except for signs that exhibit time, temperature, date, or similar information and searchlights permitted as an attention-getting device by the zoning enforcement officer. Nonconforming signs may not be converted to use an electronic or multi-vision display. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Chicago Heights Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Chicago Heights, Illinois, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Chicago Heights, Illinois Sign Rules at a Glance
Chicago Heights, Illinois regulates 16 sign types across 8 zoning districts. Monument Signs in the Business District (B districts) are capped at 10 ft tall and 32 sq ft, with a 2 ft setback. Most commercial signs in Chicago Heights require a permit.
Detailed Sign Ordinance Requirements for Chicago Heights, Illinois
Sign Rules by Zoning District in Chicago Heights (8 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 6 | Not listed | Not listed | Not listed |
| Residential District (R districts) | 4 | 6 ft | 12 sq ft | Not listed |
| Mixed-Use Residential District (MXR) | 5 | 24 ft (mounted height) | 32 sq ft per banner; max 3 banners | Not listed |
| Mixed-Use District (MX) | 6 | 10 ft | 32 sq ft per sign | Not listed |
| Business District (B districts) | 6 | 15 ft | 32 sq ft | Not listed |
| Manufacturing District (M-2, M-3) | 6 | 75 ft | 672 sq ft per face; 1,344 sq ft max per sign | Not listed |
| Non-residential districts | 2 | 6 ft | 48 sq ft per project | Not listed |
| Multi-Unit Dwelling Uses | 1 | 24 ft (mounted) | 32 sq ft per banner; max 3 banners | Not listed |
Zone-by-Zone Sign Requirements in Chicago Heights(sample of 3 of 8 zones)
Mixed-Use District (MX)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | 10 ft | 24 sq ft per tenant | Not listed | Not listed | 1 per tenant per frontage | Parallel, building face. | Not listed | Unlock | Table 11.3 |
| Projecting Sign | 10 ft | 16 sq ft per tenant | Not listed | Not listed | 1 per tenant per frontage | Perpendicular or angled from building face. | Not listed | Unlock | Table 11.4 |
| Awning Sign | 10 ft | 12 sq ft per awning | Not listed | Not listed | 1 per awning | On attached awning. | Not listed | Unlock | Table 11.6 |
| Monument Sign | 10 ft | 32 sq ft per sign | Not listed | 2 ft minimum | 1 per street frontage | Front/side yard; minimum 2 ft from lot line. | Not listed | Unlock | Table 11.10 |
| Ped-Scale Pole-Mounted Sign | 8 ft | 16 sq ft | Not listed | 4 ft from property line | 1 per street frontage | Freestanding, pole-mounted or hanging. | Not listed | Unlock | Table 11.11 |
| Sandwich Board Sign | 3 ft | 6 sq ft per face | Not listed | Not listed | 1 per building lot | Within 15 ft of business entrance, not more than 1 ft from building line, not within 10 ft of intersection/crosswalk. May be in right-of-way if minimum 5 ft walkway. | Not listed | Unlock | Section 11-3.2.e |
Business District (B districts)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 1.0 sq ft per linear foot of tenant frontage, max 60 sq ft/tenant | Not listed | Not listed | 1 per tenant per frontage | Parallel to building face, not above parapet. | Not listed | Unlock | Table 11.3 |
| Projecting Sign | 15 ft | 16 sq ft each | Not listed | Not listed | 1 per tenant per frontage | Perpendicular or at angle; mounted to building. | Not listed | Unlock | Table 11.4 |
| Awning Sign | 15 ft | 16 sq ft | Not listed | Not listed | 1 per awning | On awning attached to building. | Not listed | Unlock | Table 11.6 |
| Monument Sign | 10 ft | 32 sq ft | Not listed | 2 ft | 1 per frontage | Freestanding in front/side yard, minimum 2 ft from lot line. | Not listed | Unlock | Table 11.10 |
| Ped-Scale Pole-Mounted Sign | 8 ft | 16 sq ft | Not listed | 4 ft from lot line | 1 per frontage | Freestanding, pole-mounted. | Not listed | Unlock | Table 11.11 |
| Sandwich Board Sign | 3 ft | 6 sq ft per sign face | Not listed | Not listed | 1 per building lot | Within 15 ft of entrance, not more than 1 ft from building line, pedestrian walkway at least 5 ft, not within 10 ft of crosswalk. | Not listed | Unlock | Section 11-3.2.e |
Manufacturing District (M-2, M-3)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 1.5 sq ft per linear foot of tenant frontage, max 100 sq ft | Not listed | Not listed | 1 per tenant per frontage | Parallel to building face. | Not listed | Unlock | Table 11.3 |
| Projecting Sign | 20 ft | 20 sq ft per sign | Not listed | Not listed | 1 per tenant per frontage | Perpendicular or angled to building face. | Not listed | Unlock | Table 11.4 |
| Awning Sign | 20 ft | 20 sq ft per awning | Not listed | Not listed | 1 per awning | On awning attached to building. | Not listed | Unlock | Table 11.6 |
| Monument Sign | 12 ft | 48 sq ft per sign | Not listed | 2 ft | 1 per frontage | Freestanding, front/side yard, min 2 ft from lot line. | Not listed | Unlock | Table 11.10 |
| Ped-Scale Pole-Mounted Sign | 10 ft | 20 sq ft | Not listed | 4 ft | 1 per frontage | Freestanding, pole-mounted. | Not listed | Unlock | Table 11.11 |
| Outdoor Advertising Sign | 75 ft | 672 sq ft per face; 1,344 sq ft max per sign | Not listed | 500 ft from protected uses | 1 per lot | Oriented toward and within 600 ft of state highway; only in M-2, M-3. | Not listed | Unlock | Section 11-17 |
PermitPal covers all 8 zoning districts in Chicago Heights. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Chicago Heights
- Signs not erected by bona fide public traffic officials which move or give the appearance of movement, including fluttering, undulating, swinging, rotating, oscillating, or otherwise moving by natural or artificial means, are prohibited, excluding flags, signs displaying time and temperature, and permitted electronic message board signs.
- Flashing signs, flashing or moving lights on signs, and reflective pennants are prohibited, except for signs that exhibit time, temperature, date, or similar information and searchlights permitted as an attention-getting device by the zoning enforcement officer.
- Outlining buildings or premises by use of exposed neon tubing, strings of lights, or any similar method is prohibited.
- Signs that include words, phrases, symbols, or characters that imitate authorized traffic signs by shape, color, or words such as 'Stop', 'Danger', 'Warning', 'Caution', or 'Go Slow', unless such is part of the business name, or use colored lamps in a manner to interfere with, mislead, or confuse traffic are prohibited.
- Any sign attached to or placed on a vehicle or trailer prominently visible from public streets is prohibited unless the vehicle is not primarily used for display, is operational, registered, licensed, and actively used for the business function.
- Signs permanently mounted on wheels are prohibited.
- Inflatable or balloon-like temporary or permanent signs are not permitted.
- Off-site advertising signs (signs marketing or promoting activities, businesses, or entities not located or offered on the sign's site) are prohibited.
- Signs that emit or utilize sound detectable from any public right-of-way are prohibited.
- Rope lighting or similar linear lighting installed to outline signs, merchandise, windows, buildings, or elements for exterior visibility is prohibited.
- Signs not addressed in the ordinance prohibited signs section are not permitted.
- No sign shall be attached to a utility pole, tree, standpipe, gutter, or drain.
- No sign shall obstruct free ingress or egress for any door, window, roof, or exitway required by the building or fire code.
- Signs shall not interfere with, obstruct, or be confused with authorized traffic signs, signals, or devices, or obstruct sight lines for pedestrians or motorists.
- Signs shall only be located within the boundaries of the lot and not within the right-of-way or on public property, unless specifically permitted.
- Nonconforming signs may not be converted to use an electronic or multi-vision display.
- Substantially altered, enlarged, moved, relocated, or replaced nonconforming signs must be brought into full compliance.
- Electrical wiring, bulbs exceeding 15 watts, and other internal components of signs shall not be exposed to public view or access.
- Illuminated signs shall not exceed specified foot candle/brightness/intensity limits and cannot cause glare on adjacent properties.
- No temporary sign shall be permanently attached.
- No sign shall cover windows, building openings, or significant architectural features (for wall signs).
Exempt Signs in Chicago Heights
- Identification signs indicating the name of residents/dwelling units (max 1 sq ft, 1 per streetface per dwelling unit).
- Identification signs with name/purpose of structure & management (max 3 sq ft, 1 per streetface per structure).
- Hours of operation signs (max 2 sq ft) and vacancy/no vacancy signs.
- Official signs, public notice, or warning signs as required by any valid federal, state, or local law or court order.
- Public service signs for safety during repair or maintenance of streets, sidewalks, or utilities in the right-of-way.
- Traffic control and other official signs by any public or governmental agency (traffic, RR crossings, trespass, danger, or service/safety aids).
- Flags (1 or 2 per lot, provided flagpoles comply with city code; all flags are counted towards max signage per lot).
- Signs located completely within an enclosed building and not readable from 10+ feet outside.
- Informational signs not exceeding 4 sq ft and not legible beyond property line or from right-of-way; signs intended inward and solely for information of employees, students, faculty, or visitors.
- Directional signs for vehicular ingress/egress to parking facilities, meeting specified size, height, quantity, and setback requirements (a permit required for these).
- Historical markers (memorial signs, tablets or cornerstones, max 4 sq ft, placed by a historical group or government).
- Temporary decorations or displays celebrating accepted patriotic, ethnic, religious, national, state or city holidays.
- Home occupation signs (1 per dwelling unit, flat against building, max 1 sq ft, not illuminated except for incidental residential lighting).
Sign Plan & Submission Notes for Chicago Heights
- A sign permit is generally required for all new or substantially altered signs, unless expressly exempt by the ordinance or specifically listed as not requiring a permit.
- No explicit mention of a master sign plan, sign plan, or variance process is found in the provided text for routine signage, although some sign types (e.g., outdoor advertising signs) require a special use permit in addition to a sign and building permit.
- For multi-tenant monument signs, criteria regarding quantity, lot size, frontage, and tenants are specified, but there is no explicit requirement for a master sign plan or coordinated sign plan; rather, the size/location criteria and one-sign-per-street-frontage limit serve as controls.
Source: municode municipal code