Sign Regulations in Chicago Ridge, Illinois
Chicago Ridge, Illinois has specific sign regulations covering 6 sign types across 2 zoning districts. Regulated sign types include Wall Sign, Ground Sign, Roof Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: March 25, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Chicago Ridge, Illinois
Sample Sign Requirements in Chicago Ridge
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign | Not listed | 500 square feet | Not listed |
| Ground Sign | 24 feet | 200 square feet | No ground sign shall be nearer than two feet from any other building or structure. |
| Roof Sign | 17 feet above the roof level | 100 square feet | At least five feet clearance between the vertical supports thereof. |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
6
- Wall Sign
- Ground Sign
- Roof Sign
- Projecting Sign
- +2 more types
Zoning Districts
2
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Chicago Ridge
Other Cities in Illinois
Frequently Asked Questions
In Chicago Ridge, the height limit for Ground Sign is 24 feet. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Chicago Ridge require a permit. We haven't published Chicago Ridge's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.
Chicago Ridge's sign code covers 6 sign types, including Wall Sign, Ground Sign, Roof Sign, and Projecting Sign. Most commercial signs need a permit. The ordinance lists 1 exemption, shown in full on this page.
This page doesn't list a single setback distance for signs in Chicago Ridge. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Chicago Ridge's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Chicago Ridge Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Chicago Ridge, Illinois, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Chicago Ridge, Illinois Sign Rules at a Glance
Chicago Ridge, Illinois regulates 6 sign types across 2 zoning districts. Ground Signs are capped at 24 feet tall and 200 square feet. Most commercial signs in Chicago Ridge require a permit.
Detailed Sign Ordinance Requirements for Chicago Ridge, Illinois
Sign Rules by Zoning District in Chicago Ridge (2 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 5 | 24 feet | 500 square feet | Not listed |
| C-1, C-2, C-3, M-1 | 1 | Not listed | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Chicago Ridge
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 500 square feet | Not listed | Not listed | Not listed | Attached to the extension front, rear or side wall of any building or other structure. | Not listed | Unlock | Sec. 38-100 to Sec. 38-103 |
| Ground Sign | 24 feet | 200 square feet | Not listed | No ground sign shall be nearer than two feet from any other building or structure. | Not listed | Supported by uprights or braces placed upon the ground and not attached to any building. | Not listed | Unlock | Sec. 38-74 to Sec. 38-78 |
| Roof Sign | 17 feet above the roof level | 100 square feet | Not listed | At least five feet clearance between the vertical supports thereof. | Not listed | Erected, constructed and maintained wholly upon or over the roof of any building with the principal support on the roof structure. | Not listed | Unlock | Sec. 38-135 to Sec. 38-138 |
| Projecting Sign | Not listed | Horizontal: 60 square feet each side or one square foot for every front foot of the building, whichever is smaller. Vertical: 100 square feet each side or two square feet for every front foot of the building, whichever is smaller. | Not listed | No sign or any part of the projecting sign shall extend nearer the curbline than one foot. | Not listed | Attached to a building or other structure and extends beyond the line of such building or structure. | Not listed | Unlock | Sec. 38-160 to Sec. 38-165 |
| Temporary Sign | Not listed | 100 square feet | Not listed | Not listed | Not listed | No temporary sign shall extend over or into any street, alley, sidewalk or other public thoroughfare a distance greater than four inches from the wall upon which it is erected. | Not listed | Unlock | Sec. 38-184 to Sec. 38-190 |
C-1, C-2, C-3, M-1
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Mobile Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Used or displayed only in C-1, C-2, C-3 and M-1 zoning districts. | Not listed | Unlock | Sec. 38-219 to Sec. 38-222 |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Chicago Ridge with a free PermitPal account.
Run a free code checkProhibited Signs in Chicago Ridge
- No sign shall be erected, relocated or maintained so as to prevent free ingress to or egress from any door, window or fire escape.
- No sign of any kind shall be attached to a standpipe or fire escape.
- No sign shall be erected at the intersection of any streets in such a manner as to obstruct free and clear vision.
- No sign shall be erected at any location where, by reason of the position, shape or color, it may interfere with, obstruct the view of or be confused with any authorized traffic sign, signal or device.
- No sign shall make use of the words 'stop,' 'look,' 'drive-in,' 'danger' or any other word, phrase, symbol or character in such manner as to interfere with, mislead or confuse traffic.
- No person shall maintain any sign which extends over public property which is wholly or partially illuminated by floodlights or spotlights.
- No person shall display upon any sign or other advertising structure any obscene, indecent or immoral matter.
- It shall be unlawful to affix to any aluminum poles in the village, adhesive-type, sticky-backed signs.
Exempt Signs in Chicago Ridge
- Political campaign signs, announcing the candidates seeking public political office and other data pertinent thereto, not exceeding six square feet in area for each premise are exempt from the provisions of this chapter. Such signs shall not be erected earlier than 45 days before the election and shall be non-illuminated. These signs shall be confined within private property with the permission of the property owner and removed within seven days after the election day.
Source: municode municipal code