Questions? Call us at (262) 218-2915

Sign Regulations in Oglesby, Illinois

Oglesby, Illinois has specific sign regulations covering 29 sign types across 5 zoning districts. Regulated sign types include Flag, Incidental Sign, Address Sign - Freestanding. Height restrictions apply. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Oglesby, Illinois

Sample Sign Requirements in Oglesby

Sign TypeMax HeightMax AreaSetback
Memorial SignNot listed4 sq. ft.Not listed
Other Temporary Sign (<6 sq.ft. & <4 ft height, Exempt)4 ft.6 sq. ft.Not listed
FlagNot listed5 ft x 8 ftSetbacks per zone; 5 ft in residential, 5 ft in nonresidential

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for OglesbyPartial Coverage

Sign Types Covered

29

  • Flag
  • Incidental Sign
  • Address Sign - Freestanding
  • Address Sign - Wall
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Height restrictions
  • Illumination rules

Official Resources for Oglesby

Frequently Asked Questions

In Oglesby, the height limit for Institutional Sign - Freestanding in the Single-Family and Two-Family Districts (RE, R1A, R1, R2) is 6 ft (Sec. 14.07.040(C)5(a)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

From the submission notes on this page: A permit application for construction, creation, or installation of a new sign or for modification of an existing sign must be accompanied by detailed drawings to show dimensions, design, structure, and location of each sign. One application and permit may include multiple signs on the same lot. Run a code check for an exact address to see the permit requirements for that zone.

Oglesby's sign code covers 29 sign types, including Flag, Incidental Sign, Address Sign - Freestanding, and Address Sign - Wall. The ordinance lists 6 exemptions. One of them: Signs not requiring a building permit or electrical permit and not legible from a distance of more than three feet beyond the property line of the development site or parcel are exempt. The full list is on this page.

In Oglesby, Flag in the Single-Family and Two-Family Districts (RE, R1A, R1, R2) must be set back 5 ft from property line (Sec. 14.07.040(C)6). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Oglesby's sign ordinance that cover digital, changing, or flashing signs: Animated signs are expressly prohibited in all zoning districts. Flashing lights, intermittent type illumination, rotating beams, beacons or illumination resembling an emergency light are prohibited on signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Oglesby Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Oglesby, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Oglesby, Illinois Sign Rules at a Glance

Oglesby, Illinois regulates 29 sign types across 5 zoning districts. Temporary For Sale/Rent Signs in the Multi-Family District (R3) are capped at 4 ft tall and 6 sq ft, set back 8 ft from property line.

Detailed Sign Ordinance Requirements for Oglesby, Illinois

Sign Rules by Zoning District in Oglesby (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones94 ft.6 sq. ft.Not listed
Single-Family and Two-Family Districts (RE, R1A, R1, R2)106 ft.32 sq. ft.Not listed
Multi-Family District (R3)116 ft.32 sq. ft.Not listed
Residential Districts (RE, R1A, R1, R2, R3)1Not listed5 ft x 8 ftNot listed
Business Districts (B1, B2, B3, B4)1230 ft.; 4 ft. above roof/parapet, whichever is higher400 sq. ft.Not listed

Zone-by-Zone Sign Requirements in Oglesby(sample of 3 of 5 zones)

Single-Family and Two-Family Districts (RE, R1A, R1, R2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address Sign - Freestanding4 ft.6 sq. ft.Not listedNot listed1 per street frontageInside property lineNot listedUnlock14.07.040(A)(Permanent signs)
Address Sign - WallNot listed2 sq. ft.Not listedNot listed1 per dwellingOn wallNot listedUnlock14.07.040(A)(Permanent signs)
Residential Identification Sign - Freestanding4 ft.24 sq. ft.Not listedNot listed1Inside property lineNot listedUnlock14.07.040(A)(Permanent signs)
Residential Identification Sign - WallNot listed1 sq. ft.Not listedNot listed1On wallNot listedUnlock14.07.040(A)(Permanent signs)
Incidental Sign4 ft.2 sq. ft.Not listedNot listedNot listedInside property lineNot listedUnlock14.07.040(A)(Permanent signs); 14.07.040(C)2
Temporary For Sale/Rent Sign4 ft.6 sq. ft.Not listed8 ft. from property line3 total temporary signs; only 1 may have commercial message8 ft. from property lineNot listedUnlock14.07.040(A)(Temporary signs); 14.07.040(C)3
Institutional Sign - Freestanding6 ft.32 sq. ft.Not listedNot listed1On premisesNot listedUnlock14.07.040(C)5(a)
FlagNot listed5 ft x 8 ft5 ft5 ft from property lineMax 1 pole, max 2 flagsOn flagpoleNot listedUnlock14.07.040(C)6

Multi-Family District (R3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address Sign - Freestanding4 ft.6 sq. ft.Not listedNot listed1 per street frontageInside property lineNot listedUnlock14.07.040(B)(Permanent signs)
Address Sign - WallNot listed6 sq. ft.Not listedNot listed1 per dwellingOn wallNot listedUnlock14.07.040(B)(Permanent signs)
Residential Identification Sign - Freestanding4 ft.24 sq. ft.Not listedNot listed1 per dwellingInside property lineNot listedUnlock14.07.040(B)(Permanent signs)
Residential Identification Sign - WallNot listed8 sq. ft.Not listedNot listed1 per public entranceOn wall (per public entrance)Not listedUnlock14.07.040(B)(Permanent signs)
Incidental Sign4 ft.2 sq. ft.Not listedNot listedNot listedInside property lineNot listedUnlock14.07.040(B)(Permanent signs); 14.07.040(C)2
Temporary For Sale/Rent Sign4 ft.6 sq. ft.Not listed8 ft. from property line3 temporary signs max per dwelling or driveway8 ft. from property lineNot listedUnlock14.07.040(B)(Temporary signs); 14.07.040(C)3
Institutional Sign - Freestanding6 ft.32 sq. ft.Not listedNot listed1On premisesNot listedUnlock14.07.040(C)5(a)
FlagNot listed5 ft x 8 ft5 ft5 ft from property lineMax 1 pole, max 2 flagsOn flagpoleNot listedUnlock14.07.040(C)6

Business Districts (B1, B2, B3, B4)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address Sign (Residential regulations apply)See residential districtsSee residential districtsNot listedNot listedSee residential districtsSee residential districtsNot listedUnlock14.07.050 (Residential signs in business districts)
Advertising Sign30 ft.; 4 ft. above roof/parapet, whichever is higher375 sq. ft.25 ft.Not between front building and street; min 200 ft from other adv. signs/res. districts (visible); min 500 ft from parks/freewaysNot listedInside property line, not between front building line and streetNot listedUnlock14.07.050 (Advertising signs); 14.07.050(A)
Wall SignNot listedNot listedNot listedBuilding wall, not facing residential districts within 100 ftNot listedOn building wallNot listedUnlock14.07.050(B)7
Freestanding Sign - B2, B4 Districts25 ft.200 sq. ft.Not listedNot listedNot listedInside property lineNot listedUnlock14.07.050 (Freestanding signs); 14.07.050(B)1
Freestanding Sign - B3 District6 ft.24 sq. ft.Not listedNot listedNot listedInside property lineNot listedUnlock14.07.050 (Freestanding signs)
Sandwich Board Sign - B1, B23 ft.6 sq. ft.Not listedNot listedNot listedInside property line; must not block required means of egressNot listedUnlock14.07.050 (Sandwich board signs); 14.07.050(B)5
Shopping Center Sign25 ft. above grade of street or ground (if above street)400 sq. ft.Not listedNot listedOne additional sign for integrated planned business developmentWithin property lines of shopping centerNot listedUnlock14.07.050(B)6
FlagNot listed5 ft x 8 ft5 ft5 ft from property line3 poles max per building, 2 flags per poleOn flagpoleNot listedUnlock14.07.050(B)10

PermitPal covers all 5 zoning districts in Oglesby. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Oglesby

  • Animated signs are expressly prohibited in all zoning districts.
  • Windblown signs including nonpermanent advertising signs affixed to buildings, fences or other structures are prohibited, except temporary banners or windblown signs advertising special events for not for profit, religious, or municipal organizations which must be removed within forty-eight hours after the end of the event.
  • Portable signs are prohibited except sandwich board signs.
  • Vehicles containing a commercial message and regularly parked on the street side of any business are considered portable signs and are prohibited unless the vehicle is regularly and customarily used in the business.
  • Signs on benches are prohibited.
  • Signs on trees are prohibited.
  • Signs on utility poles are prohibited, except those installed by the utility and related to the utility facility.
  • Signs blocking required means of egress from any building are prohibited.
  • Roof signs are prohibited.
  • Signs within the public right-of-way or on public property are prohibited, except signs posted in accordance with section 14.07.030 or projecting signs in accordance with subsection 14.07.050(B)2.
  • Any sign that is not exempt, not a lawful nonconforming sign, or not expressly allowed is prohibited.
  • Flashing lights, intermittent type illumination, rotating beams, beacons or illumination resembling an emergency light are prohibited on signs.
  • A display sign or outdoor advertising device may not be placed, erected, altered, rebuilt, enlarged, extended or relocated except in conformity with the provisions of this chapter.

Exempt Signs in Oglesby

  • Any public notice or warning required by a valid and applicable federal, state, or local law, regulation, or ordinance, or by order of a court of competent jurisdiction is exempt.
  • Any sign inside a building, not attached to a window or door, that is not legible from a distance of more than three feet beyond the property line of the development site or parcel is exempt.
  • Traffic control signs on private property, such as 'Stop,' 'Yield,' and similar signs, with faces meeting standards set forth in the 'Illinois Manual On Uniform Traffic Control Devices' and containing no commercial message are exempt.
  • Temporary signs required by a valid and applicable federal, state, or local law, regulation, or ordinance; or posted by a public agency acting in accordance with an adopted law or ordinance are exempt, provided such signs are removed when they no longer serve their purpose.
  • Signs not requiring a building permit or electrical permit and not legible from a distance of more than three feet beyond the property line of the development site or parcel are exempt.
  • Memorial signs containing no commercial message and not larger than four square feet are exempt.

Sign Plan & Submission Notes for Oglesby

  • A permit application for construction, creation, or installation of a new sign or for modification of an existing sign must be accompanied by detailed drawings to show dimensions, design, structure, and location of each sign. One application and permit may include multiple signs on the same lot.
  • There is no explicit requirement for a master sign plan or variance meeting in the provided text, but an integrated planned business development (shopping center) in single ownership and management, or under unified control, may erect an additional shopping center sign, possibly implying a coordinated approach or plan for signage on such properties.

Source: municode municipal code