Sign Regulations in Orland Hills, Illinois
Orland Hills, Illinois has specific sign regulations covering 26 sign types across 6 zoning districts. Regulated sign types include Window Graphic, Wall Graphic (Surrounded by Business or Manufacturing), Marquee. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 20, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Orland Hills, Illinois
Sample Sign Requirements in Orland Hills
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Graphic | If between windows, no more than 2/3 of the distance between the top of a window and the sill of the window above. For single-story building, no higher than the ground graphic permitted at same location; for multiple-story, may extend to top of wall. | No more than 40% of signable wall area. Signable area is calculated per Appendix and §155.21. | Not listed |
| Ground Graphic | Not to exceed the highest elevation of the roof or wall of the building for which it advertises. | Total area as allowed for the site; see Table of Basic and Auxiliary Design Elements. | Must conform to setback requirements of district. Height measured from grade at right-of-way. |
| Window Graphic | Not listed | 15% of window area. | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
26
- Window Graphic
- Wall Graphic (Surrounded by Business or Manufacturing)
- Marquee
- Awning/Canopy
- +2 more types
Zoning Districts
6
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Illinois
Frequently Asked Questions
In Orland Hills, the height limit for Residential Name Sign in the Residential districts is 10 ft (Sec. 155.36(A)(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Orland Hills require a permit. From the submission notes on this page: No street graphic, other than those identified in § 155.09 (exemptions), may be displayed unless application to display the street graphic is made to the Building Commissioner and a permit is issued. Run a code check for an exact address to see the permit requirements for that zone.
Orland Hills's sign code covers 26 sign types, including Window Graphic, Wall Graphic (Surrounded by Business or Manufacturing), Marquee, and Awning/Canopy. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Traffic signs. The full list is on this page.
In Orland Hills, Residential Name Sign in the Residential districts must be set back at least 6 ft from nearest property line unless on mailbox or over doorway (Sec. 155.36(A)(1)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Orland Hills's sign ordinance that cover digital, changing, or flashing signs: Flashing graphics. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Orland Hills Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Orland Hills, Illinois, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Orland Hills, Illinois Sign Rules at a Glance
Orland Hills, Illinois regulates 26 sign types across 6 zoning districts. Multi-family Entrance Signs in the Residential districts are capped at 6 ft tall and 24 sq ft, set back at least 15 ft from nearest right-of-way/property line (Sec. 155.36(B)(2)). Most commercial signs in Orland Hills require a permit.
Detailed Sign Ordinance Requirements for Orland Hills, Illinois
Sign Rules by Zoning District in Orland Hills (6 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Business districts | 7 | If between windows, no more than 2/3 of the distance between the top of a window and the sill of the window above. For single-story building, no higher than the ground graphic permitted at same location; for multiple-story, may extend to top of wall. | No more than 40% of signable wall area. Signable area is calculated per Appendix and §155.21. | Not listed |
| Residential districts | 8 | 10 ft | 32 sq ft; alternative: 24 sq ft in front of building setback line | Not listed |
| Manufacturing | 6 | No higher than ground graphic at same location (single-story); may extend to top of wall (multi-story). | 30% of signable wall area. | Not listed |
| Office | 5 | Not listed | 20% of signable wall area. | Not listed |
| Areas of special control | 1 | Not listed | Not listed | Not listed |
| General Regulations For All Zones | 4 | 3 ft (<1 acre), 12 ft (≥1 acre). | 32 sq ft per lot. | Not listed |
Zone-by-Zone Sign Requirements in Orland Hills(sample of 3 of 6 zones)
Business districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Graphic | If between windows, no more than 2/3 of the distance between the top of a window and the sill of the window above. For single-story building, no higher than the ground graphic permitted at same location; for multiple-story, may extend to top of wall. | No more than 40% of signable wall area. Signable area is calculated per Appendix and §155.21. | Not listed | Not listed | One wall graphic per establishment. More allowed per frontage and identification needs. | On building wall/facade | Not listed | Unlock | §155.35(A), §155.21, Table of Basic and Auxiliary Design Elements, Business Surrounded by Business or Manufacturing |
| Ground Graphic | Not to exceed the highest elevation of the roof or wall of the building for which it advertises. | Total area as allowed for the site; see Table of Basic and Auxiliary Design Elements. | Not listed | Must conform to setback requirements of district. Height measured from grade at right-of-way. | More than one allowed if area reduced per above. | On ground, in front of building, per setbacks. | Not listed | Unlock | §155.35(A)(B), §155.20, Table of Basic and Auxiliary Design Elements, Business Surrounded by Business or Manufacturing |
| Awning/Canopy Graphic | Not listed | Not listed | Not listed | Not listed | Not listed | On awning or canopy attached to building. | Not listed | Unlock | §155.05(A), Table of Basic and Auxiliary Design Elements |
| Marquee Graphic | Not listed | Not listed | Not listed | Not listed | Not listed | Vertical face of marquee/canopy. | Not listed | Unlock | §155.05(A), §155.08(H), Table of Basic and Auxiliary Design Elements |
| Window Graphic | Not listed | 15% of window area. | Not listed | Not listed | Not listed | On window. | Not listed | Unlock | §155.22, Table of Basic and Auxiliary Design Elements |
| Temporary Graphic | Varies, e.g., real estate <1acre = 3 ft, >1acre = 12 ft; others see specific sign type. | Depends on type: Real estate for <1acre = 3 sq ft; >1acre up to 12 sq ft per acre (max 64 sq ft); Construction = 8 sq ft per firm, max 32 sq ft per site; Commercial project = permanent sign allowance; Political = 32 sq ft per lot; Public/charity/religion = 12 sq ft. | Not listed | E.g., political: ≥15 ft from pavement, ≥50 ft from nearest curb intersection. | Varies by sign type, e.g., one per lot, see §155.23. | Varies, on site, within specified distance from property line. | Not listed | Unlock | §155.23, §155.35(E), Table of Basic and Auxiliary Design Elements |
| Time and Temperature Graphic | Not listed | Not listed | Not listed | Not listed | Not listed | Wall or ground mounted. | Not listed | Unlock | §155.05(A)(2), Table of Basic and Auxiliary Design Elements |
Residential districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Residential Name Sign | 10 ft | 2 sq ft per sign | Not listed | ≥6 ft from nearest property line unless on mailbox or over doorway. | Two per single-family dwelling. | On mailbox or ≥6 ft from nearest property line. | Not listed | Unlock | §155.36(A)(1) |
| Street Number Sign | 10 ft | 2 sq ft per sign | Not listed | ≥6 ft from property line unless on mailbox/over doorway. | Two per residential dwelling. | On mailbox, over doorway, or ≥6 ft from property line. | Not listed | Unlock | §155.36(A)(1) |
| Subdivision Entrance Sign | 6 ft | 24 sq ft | Not listed | Not listed | One per entrance. | At subdivision entrance. | Not listed | Unlock | §155.36(A)(2) |
| Multi-family Entrance Sign | 6 ft | 24 sq ft | Not listed | ≥15 ft from nearest right-of-way/property line. | One per vehicular entrance. | At entrance from public right-of-way. | Not listed | Unlock | §155.36(B)(2) |
| Multi-family Rental Office Sign | 6 ft | 10 sq ft per sign | Not listed | ≥6 ft from property line, top not above 6 ft. | At each entrance. | At each vehicular or major public entrance. | Not listed | Unlock | §155.36(B)(1) |
| Civic/Religious/Quasi-Public Sign | 6 ft | 32 sq ft; alternative: 24 sq ft in front of building setback line | Not listed | In accordance with district setbacks or ≥15 ft from right-of-way/property line. | Not listed | On private property, per setbacks. | Not listed | Unlock | §155.36(C)(1) |
| Temporary Informational Sign (Institutional Events) | 6 ft | 12 sq ft | Not listed | ≥15 ft from property line. | One per event. | ≥15 ft from property line. | Not listed | Unlock | §155.36(C)(2) |
| Garage Sale Sign | Not listed | 3 sq ft per lot | Not listed | ≥15 ft from pavement, ≥50 ft from curb intersection. | One per zoning lot. | ≥15 ft from street pavement, ≥50 ft from curb intersection. | Not listed | Unlock | §155.36(C)(6), §155.23 |
Manufacturing
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Graphic (Surrounded by Business or Manufacturing) | No higher than ground graphic at same location (single-story); may extend to top of wall (multi-story). | 30% of signable wall area. | Not listed | Not listed | Not listed | On building wall/facade. | Not listed | Unlock | Table of Basic and Auxiliary Design Elements, §155.21 |
| Ground Graphic (Surrounded by Business or Manufacturing) | Not to exceed the highest elevation of roof/wall of bldg. | Not listed | Not listed | Must meet required setback for district. | Not listed | Frontage, see district requirements. | Not listed | Unlock | §155.20, Table of Basic and Auxiliary Design Elements |
| Wall Graphic (Surrounded by Office, Residential, or Rural) | Same as above. | 20% of signable wall area. | Not listed | Not listed | Not listed | On wall/facade. | Not listed | Unlock | Table of Basic and Auxiliary Design Elements |
| Window Graphic | Not listed | 15% of window area. | Not listed | Not listed | Not listed | On window. | Not listed | Unlock | Table of Basic and Auxiliary Design Elements, §155.22 |
| Marquee | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table of Basic and Auxiliary Design Elements |
| Awning/Canopy | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table of Basic and Auxiliary Design Elements |
PermitPal covers all 6 zoning districts in Orland Hills. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Orland Hills
- Signs that imitate an official traffic sign or signal or contain the words 'stop', 'go slow', 'caution', 'danger', 'warning', or similar words.
- Signs which may be confused with or construed as traffic-control devices, or which hide from view any traffic street sign or signal, or which obstruct the view in any direction at a street or road intersection.
- Pennants or banners.
- Windblown devices such as spinners and streamers.
- Signs painted directly onto a wall or roof.
- Signs advertising off-premise businesses, products, or services, unless pursuant to a written off-premise sign location agreement with the village.
- Beacon or search lights.
- Flashing graphics.
- Projecting signs (except those on the vertical faces of a marquee or canopy, provided no part projects above or below the vertical face of the marquee or canopy).
- Roof graphics.
- Signs encroaching into the public right-of-way. Any such sign is subject to confiscation, removal, or destruction by village employees.
- Signs attached to utility poles, trees, and fences, located in the public right-of-way.
- It is unlawful to advertise any unlawful business or articles.
- It is unlawful to injure or deface any lawful advertisement or notice.
- It is unlawful to distribute handbills, circulars, or any advertising matter by placing them in or upon any motor vehicles standing or parked in public streets.
- It is unlawful to post any bills or advertisement on any public property without authority of the Village Board of Trustees, or on any private property without written consent of the owner.
- No person shall affix or post any sign, placard, advertisement, or inscription, or erect any sign in any park, except as authorized by the Board of Trustees.
Exempt Signs in Orland Hills
- Traffic signs.
- Municipal signs, including street identification signs.
- Directional signs without advertising, less than two square feet.
- Professional wall signs one square foot or less.
- Signs required by ordinance or law, such as handicapped parking, self-service gasoline instructions, and similar.
- Window and pedestrian door signs.
- Real estate signs.
- Political campaign signs.
- Public information signs.
- Homeowner identification signs, not exceeding two square feet.
- Garage sale signs.
Sign Plan & Submission Notes for Orland Hills
- No street graphic, other than those identified in § 155.09 (exemptions), may be displayed unless application to display the street graphic is made to the Building Commissioner and a permit is issued.
- The Building Commissioner may require that the application be accompanied by a site plan, drawings, or other suitable illustrations sufficient to indicate the character of the graphic and of the surroundings in which it is to be displayed.
- The Building Commissioner may attach to his approval certain conditions, considering the character of the street graphic and the impact the graphic will make on the surroundings.
- A permit is required for special outdoor sales of goods, wares, items, merchandise, or services and special advertising signs and promotional devices (except for residential garage and yard sales).
- A permit is required for all special promotional signs, inflatable devices, beacon search lights and other promotional items or devices installed for B-2 automobile special promotional programs.
- Variations/variances from sign requirements may be granted by Village Board. Application must be made for a variance, and fees apply.
- No sign may be erected, displayed, or substantially altered except in conformance with the Appendix: Table of Basic and Auxiliary Design Elements and other requirements of this chapter.
- All nonconforming street graphics must be removed, changed, or altered to conform, according to a stated amortization schedule.