Questions? Call us at (262) 218-2915

Sign Regulations in Batesville, Indiana

Batesville, Indiana has specific sign regulations covering 67 sign types across 8 zoning districts. Regulated sign types include Banner Signs (Temporary), Flying Banner Signs (Temporary), A-Frame/T-Frame Signs (Temporary). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: November 18, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Batesville, Indiana

Sample Sign Requirements in Batesville

Sign TypeMax HeightMax AreaSetback
Flagpole (Residential Districts)Up to 30 ft without improvement location permit; above 30 ft requires permitNot listedNot listed
Flagpole (Nonresidential Uses; Nonresidential Districts)Maximum height is lesser of 1.5× max building height for the district or 50 ftNot listedNot listed
Placement Clearances (Overhangs and Right-of-Way Encroachments)Minimum vertical clearance: 8 ft over pedestrian areas; 14 ft over vehicular areasNot listedProhibited within sight visibility triangles

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BatesvilleFull Coverage

Sign Types Covered

67

  • Banner Signs (Temporary)
  • Flying Banner Signs (Temporary)
  • A-Frame/T-Frame Signs (Temporary)
  • Door Signs
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Batesville

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Batesville, the height limit for Freestanding Sign: Tower Signs in the Business Districts (B1, B2, B3, B4) is 15 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Batesville require a permit. From the submission notes on this page: Applications for permanent signs may be approved by: a comprehensive sign program; a master sign plan; or a separate sign permit approved by the Administrator; the Plan Commission considers applications except those subject to administrative approval. Run a code check for an exact address to see the permit requirements for that zone.

Batesville's sign code covers 67 sign types, including Banner Signs (Temporary), Flying Banner Signs (Temporary), A-Frame/T-Frame Signs (Temporary), and Door Signs. Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Maintaining legal signs is allowed without a permit (like-for-like repair or replacement that does not change color, size, design, or style). The full list is on this page.

In Batesville, Freestanding Sign: Monument Signs (Business Districts) in the Business Districts (B1, B2, B3, B4) must be set back at least 3 ft from right-of-way. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Batesville's sign ordinance that cover digital, changing, or flashing signs: Animated, blinking, flashing, moving, rotating, or scrolling-text signs are prohibited unless protected by state statute or otherwise allowed in this chapter. For permanent signs: exposed light sources are prohibited except for marquee signs; flashing, blinking, reflective, animated, or rotating lights, or signs with intermittent or varying intensity of illumination are prohibited except for changing message displays and marquee signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Batesville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Batesville, Indiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Batesville, Indiana Sign Rules at a Glance

Batesville, Indiana regulates 67 sign types across 8 zoning districts. Freestanding Sign: Directory Signs in the Mixed-Use Districts are capped at 8 ft tall and 40 sq ft, with a minimum 75 ft setback. Most commercial signs in Batesville require a permit.

Detailed Sign Ordinance Requirements for Batesville, Indiana

Sign Rules by Zoning District in Batesville (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones11Up to 30 ft without improvement location permit; above 30 ft requires permitNot listedNot listed
Residential Districts (R1, R2, R3, R4)1245 inches32 sq ftNot listed
Residential Districts (Nonresidential Uses in Residential Districts)1645 inches32 sq ftNot listed
Business Districts (B1, B2, B3, B4)29Sign height ≤80% of vertical dimension of sign band/wall space80 sq ft (+20 sq ft for identifying tenants/occupants of suites ≤5,000 sq ft)Not listed
Industrial Districts (I1, I2)20≤80% of sign band/wall space vertical dimension80 sq ft (+20 sq ft for small tenants ≤5,000 sq ft)Not listed
Mixed-Use Districts19≤80% of sign band/wall vertical dimension80 sq ft (+20 sq ft for small tenants ≤5,000 sq ft)Not listed
Downtown District (DT)445 inches32 sq ft (Nonresidential District column applies if treated as nonresidential)Not listed
Unit Development Plan District (UD)545 inches32 sq ft (Nonresidential District column applies if treated as nonresidential)Not listed

Zone-by-Zone Sign Requirements in Batesville(sample of 3 of 8 zones)

Business Districts (B1, B2, B3, B4)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Non-Residential Uses - 1 Story Buildings)Sign height ≤80% of vertical dimension of sign band/wall spaceMinimum 32 sq ft per tenant wall sign; maximum per calculated sign allowanceSign length ≤80% of horizontal length of exterior elevation of tenant suiteNot listedPer tenant suite; can be placed on multiple elevations within allowanceOn any exterior wall of tenant/user suiteNot listedUnlock6.4(I)(4)(a)-(f); 6.4(H)(2)(b); 6.4(H)(1)(c)
Freestanding Sign: Monument Signs (Business Districts)≤12 ft to top of design embellishments; sign face between 2 ft and 10 ft above grade60 sq ftNot listed≥3 ft from right-of-way1 per 100 ft frontage; +1 per additional 300 ft; spacing ≥100 ftOnsite; lot/parcel with minimum 100 ft street frontageNot listedUnlock6.4(I)(18)(b)-(c); 6.4(H)(4)
Freestanding Sign: Tower Signs15 ft80 sq ft (+20 sq ft for identifying tenants/occupants of suites ≤5,000 sq ft)Not listed≥3 ft from right-of-way≤1 per 500 ft; total freestanding signs ≤1 per 300 ftRetail centers exceeding 40 acres (Business Districts)Not listedUnlock6.4(I)(19); 6.4(H)(4)
Freestanding Sign: Directory Signs8 ft40 sq ftNot listed≥75 ft from perimeter property line (except where noted)1 per 4 tenants/usesOnsite within landscape islands/pedestrian areasNot listedUnlock6.4(I)(23); Table 6-5
Freestanding Sign: Onsite Traffic Directional Signs3 ft3 sq ftNot listed≥25 ft from right-of-wayAs necessaryAssist vehicular movement onsite; not within required perimeter landscape areaNot listedUnlock6.4(I)(20); Table 6-5
Temporary Signs (General - Nonresidential District Column Applies)Freestanding: 6 ft; Wall: 15 ft32 sq ftNot listed10 ft from right-of-way; 15 ft spacingMax 4 per parcelOn private property; not on public sidewalk/right-of-way; not within sight visibility triangleNot listedUnlockTable 6-1
A-Frame/T-Frame Signs (Temporary)45 inchesNot listed31 inches≥5 ft from roadwayUp to 4 per business (combined with flying banners)Adjacent to parcel/business; at grade; allowed on public sidewalk/right-of-wayNot listedUnlock6.4(G)(2); Table 6-2
Flying Banner Signs (Temporary)15 ft12 sq ftNot listed≥4 ft from curb or equal to sign height (whichever greater)Up to 4 per business (combined with A-Frame/T-Frame)Adjacent to parcel/business; at gradeNot listedUnlock6.4(G)(4); Table 6-2

Industrial Districts (I1, I2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign: Monument Signs≤12 ft to top of embellishments; sign face 2–10 ft above grade60 sq ftNot listed≥3 ft from right-of-way1 per 100 ft frontage; +1 per additional 300 ftOnsite; minimum 100 ft street frontageNot listedUnlock6.4(I)(18)(b)-(c); 6.4(H)(4); Table 6-5
Freestanding Sign: Tower Signs15 ft80 sq ft (+20 sq ft for small tenants ≤5,000 sq ft)Not listed≥3 ft from right-of-wayPer frontage limitsSites abutting a freeway and exceeding 40 acres (Industrial Districts)Not listedUnlock6.4(I)(19); Table 6-5
Freestanding Sign: Directory Signs8 ft40 sq ftNot listed≥75 ft from perimeter property lines (except as noted)1 per 4 tenants/usesOnsiteNot listedUnlock6.4(I)(23); Table 6-5
Freestanding Sign: Onsite Traffic Directional Signs3 ft3 sq ftNot listed≥25 ft from right-of-wayAs necessaryOnsite; not in required perimeter landscape areaNot listedUnlock6.4(I)(20); Table 6-5
Temporary Signs (General - Nonresidential District Column Applies)Freestanding: 6 ft; Wall: 15 ft32 sq ftNot listed≥10 ft from right-of-way; 15 ft spacingMax 4 per parcelOn private propertyNot listedUnlockTable 6-1
A-Frame/T-Frame Signs (Temporary)45 inchesNot listed31 inches≥5 ft from roadwayUp to 4 per business (combined with flying banners)Adjacent to parcel/business; at grade; allowed on public sidewalks/right-of-wayNot listedUnlock6.4(G)(2); Table 6-2
Flying Banner Signs (Temporary)15 ft12 sq ftNot listed≥4 ft from curb or equal to sign height (whichever greater)Up to 4 per business (combined with A-Frame/T-Frame)Adjacent to parcel/business; at gradeNot listedUnlock6.4(G)(4); Table 6-2
Banner Signs (Temporary)8 ft if freestandingPer Table 6-2 (up to 180 sq ft per side for large occupancies)Not listed3 ft if ground sign1On premisesNot listedUnlock6.4(G)(3); Table 6-2

Mixed-Use Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign: Monument Signs≤12 ft (embellishments) and sign face between 2–10 ft above grade60 sq ftNot listed≥3 ft from right-of-way1 per 100 ft; +1 per 300 ft; spacing ≥100 ftOnsite; minimum 100 ft street frontageNot listedUnlock6.4(I)(18)(b)-(c); 6.4(H)(4); Table 6-5
Freestanding Sign: Tower Signs15 ft80 sq ft (+20 sq ft for small tenants ≤5,000 sq ft)Not listed≥3 ft from right-of-wayPer frontage limitsSites abutting a freeway and exceeding 40 acres (Mixed-Use Zoning Districts)Not listedUnlock6.4(I)(19); Table 6-5
Freestanding Sign: Directory Signs8 ft40 sq ftNot listed≥75 ft1 per 4 tenants/usesOnsiteNot listedUnlock6.4(I)(23); Table 6-5
Freestanding Sign: Onsite Traffic Directional Signs3 ft3 sq ftNot listed≥25 ft from right-of-wayAs necessaryOnsite; not in required perimeter landscape areaNot listedUnlock6.4(I)(20); Table 6-5
Temporary Signs (General - Nonresidential Column Applies)Freestanding: 6 ft; Wall: 15 ft32 sq ftNot listed≥10 ft; 15 ft spacingMax 4 per parcelOn private propertyNot listedUnlockTable 6-1
A-Frame/T-Frame Signs (Temporary)45 inchesNot listed31 inches≥5 ft from roadwayUp to 4 per business (combined with flying banners)Adjacent to parcel/business; at grade; allowed on public sidewalk/right-of-wayNot listedUnlock6.4(G)(2); Table 6-2
Flying Banner Signs (Temporary)15 ft12 sq ftNot listed≥4 ft from curb or equal to sign heightUp to 4 per business (combined with A-Frame/T-Frame)Adjacent to parcel/business; at gradeNot listedUnlock6.4(G)(4); Table 6-2
Banner Signs (Temporary)8 ft if freestandingPer Table 6-2 by occupancy size (up to 180 sq ft per side for >50,000 sq ft)Not listed3 ft if ground sign1On premisesNot listedUnlock6.4(G)(3); Table 6-2

PermitPal covers all 8 zoning districts in Batesville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Batesville

  • Abandoned signs are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Animated, blinking, flashing, moving, rotating, or scrolling-text signs are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Balloon or inflatable signs are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Billboards or off-premise advertising signs are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Pole signs are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Reflective signs are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Signs attached to or painted on trees or natural features are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Signs within the right-of-way are prohibited unless protected by state statute or specifically permitted in this chapter (e.g., with an encroachment permit for projections)
  • Signs installed, attached to, or painted on fences are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Signs or sign support structures obstructing a means of egress (fire escapes, windows, door openings, stairways, exits, walkways), any utility access, or fire department connection are prohibited
  • Signs interfering with any opening required for ventilation are prohibited
  • Signs resembling traffic control device signs are prohibited unless protected by state statute or otherwise allowed in this chapter
  • Signs with exposed raceways are prohibited
  • Snipe or bandit signs are prohibited
  • Unlawful vehicle signs are prohibited
  • Signs are prohibited within sight visibility triangles, except appropriately placed traffic control device signs
  • Signs on public property are illegal unless required by state law or otherwise permitted by this chapter and are subject to confiscation
  • Unless specifically exempted, it is unlawful to construct, install, attach, place, paint, alter, relocate, or otherwise maintain any sign without first obtaining a sign permit according to this chapter
  • For permanent signs: exposed light sources are prohibited except for marquee signs; flashing, blinking, reflective, animated, or rotating lights, or signs with intermittent or varying intensity of illumination are prohibited except for changing message displays and marquee signs

Exempt Signs in Batesville

  • Government signs, including signs erected by the City for government purposes, are exempt from this chapter
  • Signs located entirely inside the premises of a building or enclosed space, other than window signs, are exempt from this chapter
  • Signs on a vehicle, other than an unlawful vehicle sign, are exempt from this chapter
  • Signs protected by state statute are exempt from this chapter
  • Traffic control device signs are exempt from this chapter
  • Maintaining legal signs is allowed without a permit (like-for-like repair or replacement that does not change color, size, design, or style)
  • Replacement of a tenant sign panel with the same design on an approved sign structure with removable panels does not require a permit

Sign Plan & Submission Notes for Batesville

  • A comprehensive sign program is required for all projects consisting of multi-tenant buildings, nonresidential complexes with multiple buildings, or large-scale mixed-use developments
  • Signs subject to an approved comprehensive sign program that comply with this chapter may be approved administratively by the Administrator (viewpoint-neutral)
  • The Plan Commission may approve a master sign plan as an alternative to 6.4(I) Permanent Sign Types for: multiple-tenant commercial/office/employment uses; a multiple-building complex for a single commercial/employment use exceeding 40 net acres; stand-alone office/employment buildings exceeding 100,000 sq ft; indoor or outdoor entertainment and recreation uses; auto malls; hospitals; hotels/commercial lodging with at least 150 guest rooms and a full-service restaurant or conference/meeting rooms; regional retail shopping malls
  • The Plan Commission may attach conditions to a master sign plan to avoid material detriment; decisions must not be based on message content
  • Master sign plan evaluation criteria include placement, quantity, size (no freestanding sign may exceed maximum height by >50% and no wall sign may exceed maximum area by >25%), design features/materials, and development standards (may not reduce any sign development standard to less than 50% of any minimum standard nor increase by more than 100% of the maximum)
  • The Administrator may administratively approve minor amendments to a master sign plan involving non-communicative activity with little or no visual impact consistent with the original approval
  • Applications for permanent signs may be approved by: a comprehensive sign program; a master sign plan; or a separate sign permit approved by the Administrator; the Plan Commission considers applications except those subject to administrative approval
  • For wall signs on one-story buildings, approval is required through a comprehensive sign program and/or a master sign plan if the building is multi-tenant or otherwise meets criteria for such review
  • For wall signs on two-story buildings, approval is required through either a comprehensive sign program or a master sign plan
  • For wall signs on buildings three or more stories, approval is required through either a comprehensive sign program or a master sign plan; top-floor wall sign maximums cannot be increased through a comprehensive sign program or master sign plan
  • For wall signs on buildings one or more stories (general rule), approval is required through a comprehensive sign program or master sign plan; top-floor wall sign maximums cannot be increased through a comprehensive sign program or master sign plan
  • Exposed neon tube type illumination is allowed only in Commercial Districts and only with administrative approval under a comprehensive sign program or master sign plan
  • Projecting roof sign heights greater than the 25% cap may be approved by the Plan Commission through a comprehensive sign program, master sign plan, or a design review application when the sign is incorporated into building architecture (not to exceed 30% above roofline/parapet)
  • Marquee signs must be approved by the Plan Commission as part of a design review application, a comprehensive sign program, or a master sign plan
  • Flagpoles for nonresidential properties must be depicted on final design review plans or approved administratively as part of a sign plan
  • Temporary signs at the perimeter of a multiple-tenant commercial/office complex or employment park may be allowed only pursuant to an approved sign plan

Source: other municipal code