Questions? Call us at (262) 218-2915

Sign Regulations in Bedford, Indiana

Bedford, Indiana has specific sign regulations covering 16 sign types across 3 zoning districts. Regulated sign types include Temporary Sign, Flag, Permanent Sign (Subdivision Identification Sign - up to 4 acres). Height restrictions apply. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Bedford, Indiana

Sample Sign Requirements in Bedford

Sign TypeMax HeightMax AreaSetback
Temporary SignNot listed36 square feet combined for all signs on the parcel; each sign max 6 square feetNot listed
FlagNot listed60 square feet combined; each flag max 15 square feetNot listed
Permanent Sign (Subdivision Identification Sign - up to 4 acres)4 feet (if ground-mounted)32 square feet total combined10 feet from city right-of-way if ground-mounted

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BedfordPartial Coverage

Sign Types Covered

16

  • Temporary Sign
  • Flag
  • Permanent Sign (Subdivision Identification Sign - up to 4 acres)
  • Permanent Sign (Subdivision Identification Sign - >4 and <40 acres)
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Height restrictions

Bedford, Indiana Sign Rules at a Glance

Bedford, Indiana regulates 16 sign types across 3 zoning districts. Free Standing Signs (Shopping Center Outlot/Satellite Store) in the Non-residential districts are capped at 35 feet tall and 100 square feet per sign (Sec. 155.033(C)(2)5C).

Detailed Sign Ordinance Requirements for Bedford, Indiana

Sign Rules by Zoning District in Bedford (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
Residential zoning districts54 feet (if ground-mounted)102 square feet total combined
Non-residential districts835 feet, measured from crown of road in front of signCombined: 1,000 square feet; Each: 1,000 square feet
General Regulations For All Zones5Not listedNot listed

Zone-by-Zone Sign Requirements in Bedford

Residential zoning districts

Sign TypeMax HeightMax AreaSetbackLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary SignNot listed36 square feet combined for all signs on the parcel; each sign max 6 square feetNot listedNot listedUnlock§ 155.033(C)(1)(b)
FlagNot listed60 square feet combined; each flag max 15 square feetNot listedNot listedUnlock§ 155.033(C)(1)(c)
Permanent Sign (Subdivision Identification Sign - up to 4 acres)4 feet (if ground-mounted)32 square feet total combined10 feet from city right-of-way if ground-mountedMay be ground-mounted at entrances to the development; at least 10 feet from city right-of-way if ground-mountedUnlock§ 155.033(C)(1)(d)(1)(A), (e), (f)
Permanent Sign (Subdivision Identification Sign - >4 and <40 acres)4 feet (if ground-mounted)48 square feet total combined10 feet from city right-of-way if ground-mountedMay be ground-mounted at entrances to the development; at least 10 feet from city right-of-way if ground-mountedUnlock§ 155.033(C)(1)(d)(1)(B), (e), (f)
Permanent Sign (Subdivision Identification Sign - 40+ acres)4 feet (if ground-mounted)102 square feet total combined10 feet from city right-of-way if ground-mountedMay be ground-mounted at entrances to the development; at least 10 feet from city right-of-way if ground-mountedUnlock§ 155.033(C)(1)(d)(1)(C), (e), (f)

Non-residential districts

Sign TypeMax HeightMax AreaSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary SignNot listed64 square feet combined for all temporary signs; each sign max 32 square feetNot listedNot listedUnlock§ 155.033(C)(2)(a)1
Wall SignNot to project above ridge line of sloping roof nor above eave line of flat roof2 sq ft per linear foot (wall width)1 per building side (may be increased if building fronts on more than one thoroughfare – see next entry); additional allowed for multiple businessesBuilding attachedUnlock§ 155.033(C)(2)2A-B
Wall Sign (Second Thoroughfare Frontage)Not to project above ridge or eave lines2 sq ft per linear foot (wall width) for second sign1 additional per additional thoroughfareBuilding attached – facing second thoroughfareUnlock§ 155.033(C)(2)2C
Wall Signs (Multiple Businesses)Not listedCombined area up to 2 sq ft per linear foot of the wallNumber of businesses in buildingBuilding attachedUnlock§ 155.033(C)(2)2D
Freestanding Sign35 feet, measured from crown of road in front of sign100 square feet1 per parcelFreestanding, on property but may not project over public propertyUnlock§ 155.033(C)(2)2E, 4A
FlagNot listedCombined: 1,000 square feet; Each: 1,000 square feetNot listedNot listedUnlock§ 155.033(C)(2)3
Free Standing Sign (Shopping Center Outlot/Satellite Store)35 feet100 square feet per sign1 per outlot or satellite store buildingPer outlot or satellite store building, freestandingUnlock§ 155.033(C)(2)5C
Detached Main Sign (Shopping Center >10 acres)Not listedNot listed1Shopping center propertyUnlock§ 155.033(C)(2)5A,B

General Regulations For All Zones

Sign TypeLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Government Sign (Traffic Control Device)Public or private property as requiredUnlock§ 155.033(B)(1)(a)
Government Sign (Address Identifier)On curb, principal building, mailbox, or suitable device visible from the streetUnlock§ 155.033(B)(1)(b)
Regulatory Sign (Warning/Safety/Prohibition)As required by law on private propertyUnlock§ 155.033(B)(1)(c)
Address NumeralsOn curb, building, mailbox, or suitable device visible from streetUnlock§ 155.033(B)(1)(b)
Government Sign (Parking/Traffic/Regulatory)As required by traffic/parking/road regulationsUnlock§ 74.002; §71.040; §71.050; §74.042; §74.078; §71.061; §71.041

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Bedford with a free PermitPal account.

Run a free code check

Prohibited Signs in Bedford

  • Signs are prohibited in all Zoning Districts unless authorized under this code.
  • No sign larger than 12 square feet shall be erected in a non-residential Zoning District unless a sign permit has been issued by the Building Commissioner.
  • Illuminated signs with flashing reflective spots or flood lamps of 25-watt tungsten or greater intensity are prohibited as they are deemed traffic hazards.
  • No sign shall be constructed, altered, located, or illuminated in any manner which causes undue glare, distraction, confusion, nuisance, or hazard to traffic or other properties.
  • No sign shall be located in a tree plat, nor shall any notice, poster, or other paper or device designed to attract attention be affixed to any lamp post, public utility pole, or shade tree, or any public structure or building, except as may be authorized by law.
  • No sign may be illuminated after 11:00 p.m. if it is located within or adjacent to any residential district, except for businesses open after that time, in which case illumination must cease upon closing.
  • No sign shall exceed 35 feet in height (in non-residential districts).
  • No sign shall be located on or project over public property.
  • Signs or advertisements projecting over any street, alley, or sidewalk shall not extend more than three feet, and must be at least eight feet above the surface.
  • No awning or over-hanging shade or covering over any street, alley, or sidewalk unless there is a space of eight feet between the object and the surface; building or maintaining any shed over these areas is unlawful.
  • If a sign, shed, or awning is maintained in violation of the relevant provisions and not removed after notice, it may be taken down by the city at the owner's expense.

Exempt Signs in Bedford

  • Government signs (such as traffic control devices, property address markings, legally required warning or prohibition signs) erected and maintained according to law are authorized in every zoning district.
  • Property owners must post address numerals visible from the street for public safety departments as required by law.
  • Signs required by federal, state, or local law for safety or access prohibition are exempt when posted to comply with such laws.

Sign Plan & Submission Notes for Bedford

  • A sign permit is required for any sign larger than 12 square feet in non-residential Zoning Districts.
  • Applications for sign permits must include drawings or sketches of the sign's construction and design and payment of an established fee.
  • Approval of required variances by the Board of Zoning Appeals is necessary when reconstructing a damaged nonconforming sign or structure.
  • All applications for sign permits are processed by the City Planning Department; if no decision is made within 30 days, the permit application is deemed granted.

Frequently Asked Questions

In Bedford, the height limit for Freestanding Sign in the Non-residential districts is 35 feet, measured from crown of road in front of sign. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

From the submission notes on this page: Applications for sign permits must include drawings or sketches of the sign's construction and design and payment of an established fee. Run a code check for an exact address to see the permit requirements for that zone.

Bedford's sign code covers 16 sign types, including Temporary Sign, Flag, Permanent Sign (Subdivision Identification Sign - up to 4 acres), and Permanent Sign (Subdivision Identification Sign - >4 and <40 acres). The ordinance lists 3 exemptions. One of them: Property owners must post address numerals visible from the street for public safety departments as required by law. The full list is on this page.

In Bedford, Permanent Sign (Subdivision Identification Sign - up to 4 acres) in the Residential zoning districts must be set back 10 feet from city right-of-way if ground-mounted. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Bedford's sign ordinance that cover digital, changing, or flashing signs: Illuminated signs with flashing reflective spots or flood lamps of 25-watt tungsten or greater intensity are prohibited as they are deemed traffic hazards. Run a code check for an exact address to see the rules for that zone.

AI-Powered Research

Ready to Research Bedford Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Bedford, Indiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds