Questions? Call us at (262) 218-2915

Sign Regulations in Bloomington, Indiana

Bloomington, Indiana has specific sign regulations covering 27 sign types across 4 zoning districts. Regulated sign types include Projecting Sign, Permanent Display Cabinet, Temporary Signs. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Bloomington, Indiana

Sample Sign Requirements in Bloomington

Sign TypeMax HeightMax AreaSetback
Freestanding Sign (Single-Family and Condominium Subdivision)6 ft32 sq ft per sideNot listed
Wall Sign (Multifamily, 3–14 units)Not listed24 sq ft per developmentNot listed
Freestanding Sign (Multifamily, 15+ units)6 ft32 sq ft per sideNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BloomingtonFull Coverage

Sign Types Covered

27

  • Projecting Sign
  • Permanent Display Cabinet
  • Temporary Signs
  • Freestanding Sign (Single-Family and Condominium Subdivision)
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Bloomington

City WebsiteMunicipal Code6 permit application links available

Frequently Asked Questions

In Bloomington, the height limit for Freestanding Sign (Single-Family and Condominium Subdivision) in the Residential District (R1, R2, R3, R4, RM, RH, RMH) is 6 ft (Sec. 20.04.100(i)(2)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Bloomington require a permit. From the submission notes on this page: If signage provisions are exceeded (for example, projecting sign length or number of temporary signs), or if a modification to standards is needed, approval processes such as a variance or conditional use may apply, as referenced in general procedural portions of the UDO. Run a code check for an exact address to see the permit requirements for that zone.

Bloomington's sign code covers 27 sign types, including Projecting Sign, Permanent Display Cabinet, Temporary Signs, and Freestanding Sign (Single-Family and Condominium Subdivision). Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Public signs erected or required by a unit of local, state, or federal government are exempt from sign permit requirements and signage regulations. The full list is on this page.

In Bloomington, Freestanding Sign (Multi-Tenant Nonresidential Centers) in the Mixed-Use District (MS, MN, MM, MC, ME, MI, MH), EM, PO must be set back at least 2 ft from right-of-way or outside sidewalk clear zone (Sec. 20.04.100(j)(4)(B)-(C)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Bloomington's sign ordinance that cover digital, changing, or flashing signs: Internally illuminated signs and electronic reader boards are prohibited in certain districts such as MD and MN, unless specifically permitted. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Bloomington Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Bloomington, Indiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Bloomington, Indiana Sign Rules at a Glance

Bloomington, Indiana regulates 27 sign types across 4 zoning districts. Freestanding Signs in certain zoning districts are capped at 4 ft tall and 15 sq ft (Sec. 20.04.100(l)(4)). Most commercial signs in Bloomington require a permit.

Detailed Sign Ordinance Requirements for Bloomington, Indiana

Sign Rules by Zoning District in Bloomington (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential District (R1, R2, R3, R4, RM, RH, RMH)86 ft32 sq ft per sideNot listed
Mixed-Use District (MS, MN, MM, MC, ME, MI, MH), EM, PO10≤ 20k sq ft: 6 ft; 20k–49,999 sq ft: 8 ft; ≥50k sq ft: 15 ft.≤20,000 sq ft GFA: per above; 20,000–34,999 sq ft: 60 sq ft; 35,000–49,999 sq ft: 75 sq ft; ≥50,000 sq ft: 125 sq ft. Individual tenant panels ≤36 sq ft.Not listed
Downtown Character Overlays (MD-CS, MD-DC, MD-UV, MD-DE, MD-DG, MD-ST), MD District (Mixed-Use Downtown)78 ft54 sq ftNot listed
General Regulations For All Zones5Not listedUp to 25% of the glass area of any individual window or glass door frameNot listed

Zone-by-Zone Sign Requirements in Bloomington(sample of 3 of 4 zones)

Residential District (R1, R2, R3, R4, RM, RH, RMH)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Single-Family and Condominium Subdivision)6 ft32 sq ft per sideNot listedNot listed1 per entrance or 2 smaller signsAt each subdivision entranceNot listedUnlock20.04.100(i)(2)
Wall Sign (Multifamily, 3–14 units)Not listed24 sq ft per developmentNot listedNot listed1 per developmentOn building(s) within the developmentNot listedUnlock20.04.100(i)(3)(A)
Freestanding Sign (Multifamily, 15+ units)6 ft32 sq ft per sideNot listedNot listed1 per vehicle entrancePer development vehicle entranceNot listedUnlock20.04.100(i)(3)(B)i
Wall Sign (Multifamily, 15+ units)Not listed24 sq ft per buildingNot listedNot listed1 per buildingOn each buildingNot listedUnlock20.04.100(i)(3)(B)ii
Wall Sign (Legal Nonconforming Multifamily, at least 3 units)Not listed10 sq ftNot listedNot listedNot listedOn building(s)Not listedUnlock20.04.100(i)(5)
Wall Sign (Legal Nonconforming Nonresidential Use)Not listed10 sq ftNot listedNot listedNot listedOn building(s)Not listedUnlock20.04.100(i)(6)(A), (B), (C)
Freestanding Sign (Legal Nonconforming Nonresidential Use, lot ≥ 30 ft street frontage)4 ft12 sq ft per sideNot listedNot listed1Not listedNot listedUnlock20.04.100(i)(6)(C)
Temporary Sign (Multifamily 15+ units and Conforming Nonresidential Use)6 ft (freestanding temporary)16 sq ft per signNot listedNot listedMax 3 per periodNot listedNot listedUnlock20.04.100(i)(9)

Mixed-Use District (MS, MN, MM, MC, ME, MI, MH), EM, PO

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Nonresidential Uses and Multi-Tenant Centers)Not listedUp to 300 sq ft per tenant (if building < 200,000 sq ft), up to 400 sq ft (if building ≥ 200,000 sq ft) (MS, MM, MC, ME, MI, MH, EM, PO); Up to 100 sq ft per tenant (MN), minimum 20 sq ftNot listedNot listedNot listedOn lease space or tenant's building wallNot listedUnlock20.04.100(j)(2), (k)(2)
Projecting SignNot listed5 sq ft (MN, MS, MM, MC, ME, MI, MH, EM, PO); MD: See MD sectionNot listedNot listedNot listedTenant lease spaceNot listedUnlock20.04.100(j)(3), 20.04.100(k)(3)
Freestanding Sign (Individual Nonresidential Uses)6 ft (MS, MM, MC, ME, MI, MH, EM, PO), 4 ft (MN)20 sq ft (street frontage > 30 ft ≤ 50 ft), 30 sq ft (≥ 50 ft < 75 ft), 45 sq ft (≥ 75 ft) (MS, MM, MC, ME, MI, MH, EM, PO); MN: 15 sq ft per sideNot listedMin 2 ft from proposed right-of-way or clear public sidewalk zoneSee additional_requirementsOn lot street frontageNot listedUnlock20.04.100(j)(4)(A)-(C), (k)(4)
Freestanding Sign (Multi-Tenant Nonresidential Centers)≤ 20k sq ft: 6 ft; 20k–49,999 sq ft: 8 ft; ≥50k sq ft: 15 ft.≤20,000 sq ft GFA: per above; 20,000–34,999 sq ft: 60 sq ft; 35,000–49,999 sq ft: 75 sq ft; ≥50,000 sq ft: 125 sq ft. Individual tenant panels ≤36 sq ft.Not listedMin 2 ft from right-of-way or outside sidewalk clear zoneSee formula and max in additional_requirementsOn street frontageNot listedUnlock20.04.100(j)(4)(B)-(C)
Freestanding Sign (Multifamily 15+ units)6 ft32 sq ft per sideNot listedNot listed1 per vehicle entrancePer vehicle entranceNot listedUnlock20.04.100(j)(7)(B)i
Wall Sign (Multifamily 15+ units)Not listed24 sq ft per buildingNot listedNot listed1 per buildingOn each buildingNot listedUnlock20.04.100(j)(7)(B)ii
Temporary Signs6 ft (freestanding temp)16 sq ft per signNot listedNot listedMax 3 per period for individual nonresidential usesNot listedNot listedUnlock20.04.100(j)(8), (k)(7)
Sandwich Board Signs4.5 ft5 sq ft per sign face2 ft 9 inNot listed1 per property, more if >1 tenant (with spacing rule)On public sidewalk (must be at least 7 ft wide), max 2 ft from building or in tree plot outside sidewalkNot listedUnlock20.04.100(k)(9)

Downtown Character Overlays (MD-CS, MD-DC, MD-UV, MD-DE, MD-DG, MD-ST), MD District (Mixed-Use Downtown)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Nonresidential/Main Use)Not listedNo less than 20 sq ft; no more than 100 sq ft per tenant. Multifamily (over 2 units): Max 24 sq ft.Not listedNot listedNot listedOn tenant lease space or within 5 ft of lease space on upper storyNot listedUnlock20.04.100(l)(2)
Projecting SignNot listed54 sq ftNot listedNot listedMax 1 per tenant per frontageAdjacent to lease spaceNot listedUnlock20.04.100(l)(3)
Freestanding Sign4 ft15 sq ftNot listedMinimum 15 ft building setback from right-of-way required for signMax 1 per propertyFront yard, at least 15 ft from public right-of-wayNot listedUnlock20.04.100(l)(4)
Permanent Display Cabinet8 ft16 sq ft per displayNot listedNot listedNot listedNot listedNot listedUnlock20.04.100(l)(5)
Wall Sign (Multifamily over 2 units)Not listed24 sq ftNot listedNot listedNot listedOn building(s)Not listedUnlock20.04.100(l)(2)(A)(iii)
Temporary Signs6 ft (freestanding)16 sq ftNot listedNot listedMax 3 per periodNot listedNot listedUnlock20.04.100(l)(6)
Sandwich Board Sign4.5 ft5 sq ft per sign per face2 ft 9 inNot listed1 per property, or more with tenants (if spaced)Public sidewalk (≥7 ft width), max 2 ft from building or in tree plot; not within B-Line Trail right-of-way.Not listedUnlock20.04.100(l)(7)

PermitPal covers all 4 zoning districts in Bloomington. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Bloomington

  • No sign or advertising device shall be established, altered, changed, erected, constructed, reconstructed, moved, divided, enlarged, demolished or maintained except in compliance with Section 20.04.100 (Signs).
  • Signs are prohibited in all zoning districts unless specifically authorized by another provision of Section 20.04.100 (Signs): Animated signs, bench signs, signs imitating public signs, off-premises signs (with certain exceptions), vehicle signs (used as display and not in regular use), intermittent lights or flashing/blinking signs, pole signs, unpermitted temporary signs including pennants, streamers, balloons, inflatable signs, spinners and feather flags, projecting signs that extend more than twelve inches (except as provided), and unpermitted electronic reader board signs.
  • Signs are prohibited in the following locations: Any public easement (unless it is a public sign or further authorized by the City), any public right-of-way (unless expressly permitted), on roofs or extending above the eave, roof line, or parapet (limited exceptions), within a vision clearance triangle, or on any traffic control sign, highway construction sign, fence, railing, utility pole, street sign, tree, or other natural object.
  • All freestanding signs must be permanently affixed to the ground.
  • Pole signs (mounted on a freestanding pole not part of or attached to a building/structure) are prohibited.
  • Internally illuminated signs and electronic reader boards are prohibited in certain districts such as MD and MN, unless specifically permitted.
  • No wall sign (other than an awning or projecting sign) may project more than twelve inches from the facade of a building.
  • Vehicle signs are prohibited when the vehicle or trailer is parked continuously in the same general location for the purposes of sign display (unless the vehicle/trailer is in use on a regular basis).
  • No sign shall be located in any public easement, public right-of-way, or vision clearance triangle, except as specifically allowed.
  • Signs are not allowed on roofs or above the roof line, nor on the vertical portion of a mansard roof unless no vertical wall space is available.

Exempt Signs in Bloomington

  • Public signs erected or required by a unit of local, state, or federal government are exempt from sign permit requirements and signage regulations.
  • Signs not more than 1.5 square feet in area are exempt from sign permit requirements and signage regulations except Section 20.04.100(f) (Prohibited Sign Locations).
  • Temporary signs, within specified size and quantity limits: two signs per property up to five square feet each, and one sign up to eight square feet, in all zoning districts; additional temporary signs for vacant properties or those under construction in nonresidential and mixed-use districts (up to 32 square feet).
  • Murals are exempt from the requirement to obtain a sign permit.
  • Window signs not exceeding 25% of the glass area of any window or glass door are exempt from sign permit requirements and do not count toward wall sign allowance.
  • Sandwich board signs are exempt from sign permit requirements provided they comply with the standards stated in Section 20.04.100.

Sign Plan & Submission Notes for Bloomington

  • A sign permit is required for all signs unless specifically exempted by Section 20.04.100 (Signs).
  • No language in Section 20.04.100 indicates the requirement for a master sign plan, general sign plan, or sign variance meeting as a blanket requirement across all zones; sign permits are the primary procedural requirement.
  • Certain types of actions, such as sign waivers for right to damages, may require a petition and waivers from all persons with an interest in the site or sign.
  • If signage provisions are exceeded (for example, projecting sign length or number of temporary signs), or if a modification to standards is needed, approval processes such as a variance or conditional use may apply, as referenced in general procedural portions of the UDO.
  • Changes or replacements of individual tenant panels in a multi-tenant sign do not require compliance of the entire sign but do require a sign permit.

Source: municode municipal code