Questions? Call us at (262) 218-2915

Sign Regulations in Connersville, Indiana

Connersville, Indiana has specific sign regulations covering 35 sign types across 4 zoning districts. Regulated sign types include Freestanding Sign - Accessory, Temporary Freestanding Sign (No Permit), Temporary Freestanding Sign (With Permit). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Connersville, Indiana

Sample Sign Requirements in Connersville

Sign TypeMax HeightMax AreaSetback
Freestanding Sign (Pylon/Pole) - Primary (Single Tenant)15 ft (variance up to 25 ft)64 sq ft (variance up to 75 sq ft)Between 3–9 ft above base grade, min. 15 ft from road edge; <3 ft or >9 ft above road elevation, min. 5 ft from edge
Freestanding Sign (Ground Mounted) - Primary (Single Tenant)8 ft (variance up to 15 ft)32 sq ft (variance up to 64 sq ft)See above
Freestanding Sign - Secondary Sign (Single Tenant)8 ft16 sq ftSee Freestanding Sign setbacks

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for ConnersvilleFull Coverage

Sign Types Covered

35

  • Freestanding Sign - Accessory
  • Temporary Freestanding Sign (No Permit)
  • Temporary Freestanding Sign (With Permit)
  • Message Center - Wall or Window
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Connersville, the height limit for Freestanding Sign (Pylon/Pole) - Primary (Single Tenant) in the Business Districts (LB, GB, PB), Industrial Districts (I-1, I-2) is 15 ft (variance up to 25 ft). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Connersville require a permit. From the submission notes on this page: A sign plan must be submitted for any zone lot where the owner or business or owner's agent proposes to erect one or more signs requiring a permit. Run a code check for an exact address to see the permit requirements for that zone.

Connersville's sign code covers 35 sign types, including Freestanding Sign - Accessory, Temporary Freestanding Sign (No Permit), Temporary Freestanding Sign (With Permit), and Message Center - Wall or Window. Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Window signs of any size inside a building not legible from a public right-of way. The full list is on this page.

In Connersville, Temporary Freestanding Sign (With Permit) in the Business Districts (LB, GB, PB), Industrial Districts (I-1, I-2) must be set back 10 ft from edge of roadway if greater than 3.5 ft tall. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Connersville's sign ordinance that cover digital, changing, or flashing signs: Beacons, flashing lights, emergency lights or search lights. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Connersville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Connersville, Indiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Connersville, Indiana Sign Rules at a Glance

Connersville, Indiana regulates 35 sign types across 4 zoning districts. Temporary Freestanding Signs (With Permit) in the Business Districts (LB, GB, PB), Industrial Districts (I-1, I-2) are capped at 8 ft tall and 32 sq ft, set back 10 ft from edge of roadway if greater than 3.5 ft tall. Most commercial signs in Connersville require a permit.

Detailed Sign Ordinance Requirements for Connersville, Indiana

Sign Rules by Zoning District in Connersville (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Business Districts (LB, GB, PB), Industrial Districts (I-1, I-2)2215 ft (variance up to 25 ft)64 sq ft (variance up to 75 sq ft)Not listed
Medical Services District (MS)148 ft64 sq ft; max 10% wall coverageNot listed
Residential Districts (R1, R2, R3, RS, RI), Agricultural Districts (A1, A2)158 ft64 sq ft; max 10% wall coverageNot listed
General Regulations For All Zones448 in32 sq ft base; up to 48 sq ft during seasonal periodNot listed

Zone-by-Zone Sign Requirements in Connersville(sample of 3 of 4 zones)

Business Districts (LB, GB, PB), Industrial Districts (I-1, I-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Pylon/Pole) - Primary (Single Tenant)15 ft (variance up to 25 ft)64 sq ft (variance up to 75 sq ft)Not listedBetween 3–9 ft above base grade, min. 15 ft from road edge; <3 ft or >9 ft above road elevation, min. 5 ft from edgeOne per property/road frontageOne per property/road frontage; see setback requirementsNot listedUnlock§ 153.37 Table 1 & Notes (A), (B), (C), (8), (F)
Freestanding Sign (Ground Mounted) - Primary (Single Tenant)8 ft (variance up to 15 ft)32 sq ft (variance up to 64 sq ft)Not listedSee aboveOne per road frontageOne per property/road frontage; see setback requirementsNot listedUnlock§ 153.37 Table 1 & Notes (A), (B), (C), (7), (8)
Freestanding Sign - Secondary Sign (Single Tenant)8 ft16 sq ftNot listedSee Freestanding Sign setbacksOne per secondary drive if >500 ft apartSecondary drive, <500 ft from primary sign (each entrance drive greater than 500 ft apart gets a 32 sq ft sign)Not listedUnlock§ 153.37 Table 1, Note (7)(b)1
Freestanding Sign (Message Center) - Standalone8 ft32 sq ftNot listedSee Freestanding Sign setbacksOne per propertySee Freestanding Sign requirementsNot listedUnlock§ 153.37 Table 1, (E)(6)(a)
Freestanding Sign (Message Center) - Part of Primary Structure8 ft32 sq ftNot listedSee Freestanding Sign setbacksOne per propertyOn or integrated with primary freestanding signNot listedUnlock§ 153.37 Table 1
Temporary Freestanding Sign (No Permit)3.5 ft16 sq ftNot listed5 ft from edge if under 3.5 ft tall; 10 ft setback if over 3.5 ft tallCumulative limits per propertyPrivate property, not in ROW; see E(3)(d)Not listedUnlock§ 153.37 Table 1, (E)(3)
Temporary Freestanding Sign (With Permit)8 ft32 sq ftNot listed10 ft from edge of roadway if greater than 3.5 ft tallCumulative limits per propertyPrivate property, not in ROWNot listedUnlock§ 153.37 Table 1, (E)(3)
Wall Sign - Front (Single Tenant)Not listedSee formulaNot listedSee site planNo maximumFront wall of buildingNot listedUnlock§ 153.37 Table 1, Note (E), Table 1

Medical Services District (MS)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Ground Mounted) - Primary8 ft32 sq ftNot listedBetween 3–9 ft above grade, min. 15 ft from edge of road; <3 ft or >9 ft above road elevation, min. 5 ftOne per road frontageGround mounted, subject to setbacksNot listedUnlock§ 153.37 (B) Table
Freestanding Sign - Secondary8 ft32 sq ftNot listedSee aboveOne per qualifying secondary driveSecondary drives/entrancesNot listedUnlock§ 153.37 (B) Table
Freestanding Sign - Accessory3 ft4 sq ftNot listedMin 5 ft (front/side/rear)Not listedMin. 5 ft from edge of public right-of-wayNot listedUnlock§ 153.37 (B) Table, (E)(1)
Temporary Freestanding Sign (No Permit)3 ft16 sq ftNot listedSee E(3)(d)Up to 32 sq ft allowed at one time per property (+16 sq ft seasonally)Private property onlyNot listedUnlock§ 153.37 (B) Table, (E)(3)
Temporary Freestanding Sign (With Permit)8 ft32 sq ftNot listedSee E(3)(d)Cumulative per propertyPrivate propertyNot listedUnlock§ 153.37 (B) Table, (E)(3), (L)
Wall Sign - FrontNot listed64 sq ft; max 10% wall coverageNot listedNot listedNot listedFront wallNot listedUnlock§ 153.37 (B) Table, Notes
Wall Sign - Side and RearNot listed32 sq ft; max 10% wall coverageNot listedNot listedNot listedSide and rear wallsNot listedUnlock§ 153.37 (B) Table
Message Center - Wall or WindowNot listed16 sq ftNot listedNot listedOne per propertyWall or windowNot listedUnlock§ 153.37 (B) Table

Residential Districts (R1, R2, R3, RS, RI), Agricultural Districts (A1, A2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Ground Mounted) - Primary8 ft32 sq ftNot listedBetween 3–9 ft above base grade, min. 15 ft from road edge; <3 ft or >9 ft above road elevation, min. 5 ftOne per road frontageGround mounted, subject to setbacksNot listedUnlock§ 153.37 (B) Table
Freestanding Sign - Secondary8 ft32 sq ftNot listedNot listedOne per qualifying secondary driveSecondary drives/entrancesNot listedUnlock§ 153.37 (B) Table
Freestanding Sign - Accessory3 ft4 sq ftNot listedMin 5 ft (front/side/rear)Not listedMin. 5 ft from edge of ROWNot listedUnlock§ 153.37 (B) Table, (E)(1)
Temporary Freestanding Sign (No Permit)3 ft16 sq ftNot listedSee E(3)(d)Cumulative per propertyPrivate property onlyNot listedUnlock§ 153.37 (B) Table, (E)(3)
Temporary Freestanding Sign (With Permit)8 ft32 sq ftNot listedSee E(3)(d)Cumulative per propertyPrivate propertyNot listedUnlock§ 153.37 (B) Table, (E)(3), (L)
Home Occupation SignNot listed4 sq ft (on building), 8 sq ft (freestanding)Not listed15 ft from travel lane (freestanding)One per home occupationOn building or ground mounted on owner's propertyNot listedUnlock§ 153.37 (E)(4)
Wall Sign - FrontNot listed64 sq ft; max 10% wall coverageNot listedNot listedNot listedFront wallNot listedUnlock§ 153.37 (B) Table
Message Center - Wall or WindowNot listed16 sq ftNot listedNot listedOne per propertyWall or windowNot listedUnlock§ 153.37 (B) Table

PermitPal covers all 4 zoning districts in Connersville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Connersville

  • All signs not expressly permitted under this ordinance in the areas under the jurisdiction of the Area Plan Commission.
  • Signs that are structurally unsafe.
  • Signs that would block views of traffic to and from at any driveway along any public roadway or road intersection.
  • Signs bearing words, phrases, symbols, colors or characteristics of traffic control signs or devices which may mislead, interfere with, or confuse drivers thereby increasing the risk of vehicle accidents.
  • Beacons, flashing lights, emergency lights or search lights.
  • Signs erected in or attached to any sidewalk, street, or highway right-of-way, utility strip, curb, curbstone, hydrant, lamppost, tree, barricade, temporary walkway, telephone, utility pole, public or partition fence.
  • No signs, including exempt signs are allowed within the public right-of-way or in the utility strip. Signs placed in these areas may be removed by the entity with jurisdiction over these right-of-ways or utility strips.
  • Permanent signs on undeveloped property.
  • Signs displayed on parked vehicles or trailers, except for licensed and operable motor vehicles with the primary purpose and regular use for transporting goods, supplies, services or people.
  • Portable or temporary signs on public property or in the public right-of-way.
  • Balloon signs (inflatable devices) are not permitted in any zoning district.
  • Inflatable signs are not permitted.
  • Roof mounted signs (erected wholly on and over the roof of a building supported by the roof structure, and extending vertically above the highest portion of the roof) are not permitted.
  • Snipe signs, including those tacked, nailed, posted, pasted, glued, or otherwise attached to trees, poles, stakes, fences, public benches, street lights, or other objects, or placed on any public property or in the public right-of-way, are not permitted.
  • Beacons are not permitted in any zoning district.

Exempt Signs in Connersville

  • Any signs legally permitted to be within the public right-of-way as per division (F)(3), Signs in the public right-of-way (including traffic control signs, public directional signs, mileage signs installed by the public entity with jurisdiction, legal notices, bus stop signs erected by a public transit company, informational signs of a public utility regarding poles, lines, pipes, or facilities).
  • Window signs of any size inside a building not legible from a public right-of way.
  • Traffic control and pedestrian safety signs on private property such as stop, yield, and similar signs on which the sign face meets the Indiana Department of Transportation standards.
  • Accessory and incidental signs on private property including directional signs, information kiosks, entrance/exit signs, menu information and similar signs.

Sign Plan & Submission Notes for Connersville

  • A sign plan must be submitted for any zone lot where the owner or business or owner's agent proposes to erect one or more signs requiring a permit.
  • The sign plan must include a site plan, dimensions of sign(s), sign elevations, proposed locations, wall dimensions and coverage, total sign program area computations, and locations of all incidental/ancillary signs (menu boards, etc.) to be included in the sign program.
  • Sign plans must be submitted and approved with home occupation petitions for home occupation signs.
  • No sign permit of any kind shall be issued for any sign unless such a sign is consistent with all requirements of this ordinance in every respect. Any deviation from the development standards may only be via a variance approved by the Board of Zoning Appeals.
  • To install, create, erect, or maintain any sign in a way that is inconsistent with any plan or permit governing such sign or zone lot is a violation.