Questions? Call us at (262) 218-2915

Sign Regulations in Crown Point, Indiana

Crown Point, Indiana has specific sign regulations covering 26 sign types across 5 zoning districts. Regulated sign types include Business Identification Freestanding Sign (On-premise), Temporary Political Signs (All Districts), Temporary Real Estate Sign (≤20 acres) (All Districts). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: November 22, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Crown Point, Indiana

Sample Sign Requirements in Crown Point

Sign TypeMax AreaSetback
Temporary Political Signs (All Districts)32 sq ft (per sign)Must be on private property; not in public right-of-way
Temporary Real Estate Sign (≤20 acres) (All Districts)32 sq ftNot listed
Temporary Real Estate Sign (Over 20 acres) (All Districts)96 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Crown PointFull Coverage

Sign Types Covered

26

  • Business Identification Freestanding Sign (On-premise)
  • Temporary Political Signs (All Districts)
  • Temporary Real Estate Sign (≤20 acres) (All Districts)
  • Temporary Real Estate Sign (Over 20 acres) (All Districts)
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Crown Point

City WebsiteMunicipal Code1 permit application link available

Crown Point, Indiana Sign Rules at a Glance

Crown Point, Indiana regulates 26 sign types across 5 zoning districts. Directional Signs (Accessory to Parking Areas) in the Business and Industrial/Office Districts (B-2, B-3, I-1, BP-1, OS-1) are capped at 5 ft above curb level and 9 sq ft per sign (Sec. 150.88(E)(5)(a)-(g)). Most commercial signs in Crown Point require a permit.

Detailed Sign Ordinance Requirements for Crown Point, Indiana

Sign Rules by Zoning District in Crown Point (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
General Regulations For All Zones3Not listed96 sq ft
Residential District (R-1, R-1A, R-2, R-3) and Conservation District (C-1)46 ft max above curb level50 sq ft
B-1 Business District6Bottom of sign at least 8 ft above existing sidewalk100 sq ft maximum
Business and Industrial/Office Districts (B-2, B-3, I-1, BP-1, OS-1)1265 ft above curb level of nearest adjoining road672 sq ft (per sign)
HS-12Not listedUp to 25% of total window area of the business

Zone-by-Zone Sign Requirements in Crown Point(sample of 3 of 5 zones)

Residential District (R-1, R-1A, R-2, R-3) and Conservation District (C-1)

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Residential Identification Sign - Wall (Multi-family/Non-dwelling buildings)Not above first floor of building12 sq ftNot listed1 per development; corner lots may have 2 (one facing each street)Directly upon the structure; within the buildable area of the zoning lotUnlock150.88(C)(1)(a)-(f) [Residential & Conservation]; 150.80.5
Residential Identification Sign - Freestanding (Multi-family/Non-dwelling buildings)6 ft max above curb level12 sq ftNot listed1 per development; corner lots may have 2 (one facing each street)Within the buildable area of the zoning lotUnlock150.88(C)(1)(a)-(e)
Temporary For Sale/For Rent/Construction Sign (Residential/C-1)Not listed16 sq ftMust not be within 10 ft of another zoning lot1; 2 on corner lotsMay be located within front yard, but not within any road right-of-way; may be mounted on the permitted structure/useUnlock150.88(C)(2)(a)-(e); 150.87.1(A)(4), (11)
Bulletin Board/Informational Sign (Non-dwelling uses)6 ft above curb level50 sq ft30 ft setback from front property line; 25 ft from any other zoning lot1 per zoning lot; corner lots may have 2 (one facing each street)Not within any required yard; at least 25 ft from any other zoning lotUnlock150.88(C)(3)(a)-(e), (4)-(5)

B-1 Business District

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning/Canopy/Marquee Sign (B-1)Equal to height of marquee/canopy/awning on which located100 sq ft maximumNot listedPer marquee/canopy/awning; content limited to name/address (theaters may list events)On marquees, canopies, or awnings attached to the building; location of the sign corresponds to location of the marquee/canopy/awningUnlock150.88(D)(1)(a)-(f); B-1 header (subject to Historic Preservation Commission)
Wall Sign (B-1)Shall not project beyond ends, top, or bottom of the wall; shall not cover wall openings100 sq ft maximumNot listed1 per zoning lot; corner lots may have 2 (one facing each street)Directly upon the building located on the zoning lotUnlock150.88(D)(2)(a)-(g)
Projecting/Perpendicular (Shingle/Blade) Sign (B-1)Bottom of sign at least 8 ft above existing sidewalk8 sq ft per face (double-faced permitted with parallel, identical faces)≥12 inches inside from curb line; ≥8 ft vertical clearance over sidewalk1 per business; stacking may allow 2 in multi-story context (see additional requirements)Mounted on ground-level facade near the business entrance; corner buildings may mount at building corner and orient in any directionUnlock150.88(D)(3)(a)-(l)
Permanent Window Signs (B-1)Not listedUp to 25% of total window area of the businessNot listedNot listedOn/in windows of the businessUnlock150.88(D)(4)(a)-(b)
Murals (B-1 only)Not listedNot listedNot listedNot listedOn building walls within B-1 DistrictUnlock150.87.2(A)(18)
Temporary Advertising/Window Signs (B-1)Not listedUp to 50% of the area of all windows of the building on the zoning lotNot listedNot listedMust be located inside buildings in the B-1 DistrictUnlock150.90(C)(1)(a)-(d)

Business and Industrial/Office Districts (B-2, B-3, I-1, BP-1, OS-1)

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
On-Building Wall Sign (Single-tenant building)Shall not cover wall openings; shall not project beyond ends, top or bottom of wall100 sq ft maximumNot listed1 per zoning lot; corner lots may have 2 (one facing each street)Directly upon the building located on the zoning lotUnlock150.88(E)(2)(a)-(g)
On-Building Wall Sign (Multi-tenant building)Shall not cover wall openings; shall not project beyond ends, top or bottom of wall100 sq ft per business (cap)Not listed1 per zoning lot; corner lots may have 2 (one facing each street) (per business frontage rules)Directly upon each tenant's building frontageUnlock150.88(E)(2)(a)-(g)
Business Identification Freestanding Sign (On-premise)Not listedNot listedPer Bulk Regulations table; also must not conflict with drainage or be in easements (150.87(G))1 per zoning lotOn the zoning lot for the businessUnlock150.88(E)(2) [second item labeled 'Business identification freestanding signs...']; 150.88(E) following bullets
Development Identification Freestanding SignNot higher than the permitted uses or 30 ft above curb level, whichever is less200 sq ft (per sign)Not listedNot listedAt the entrance to the development (identifies commercial/industrial subdivisions, PUDs, or other development)Unlock150.88(E)(3)(bullets); 150.88(E) ‘Cont.’ (f)
Directional Signs (Accessory to Parking Areas)5 ft above curb level9 sq ft (per sign)On-site (within property boundaries)Per driveway/entrance + 1 per parking area (with corner lot limit)Within the area of the zoning lot; may be free-standingUnlock150.88(E)(5)(a)-(g)
Billboard (Outside I-65 Corridor) (B-2, B-3 only)35 ft above curb level of nearest adjoining road300 sq ft (per sign)Same as permitted uses in the district1 per zoning lotWithin the buildable area of the zoning lotUnlock150.88(F)(1)-(6)
Billboard (Within I-65 Corridor) (B-2, B-3 only)65 ft above curb level of nearest adjoining road672 sq ft (per sign)20–200 ft from I-65 right-of-way; otherwise within buildable area1 per zoning lotWithin the buildable area of the zoning lot; within I-65 CorridorUnlock150.88(G)(1)-(6)
Temporary Banner/Pennant/Feather Flag (Grand Opening only)Max permitted height 4 ft to highest part of sign or post24 sq ft per sign face (banner)Not listed1 per permitBanners/pennants must be securely affixed to the wall of the associated buildingUnlock150.90(D)(3)(a)-(e)

PermitPal covers all 5 zoning districts in Crown Point. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Crown Point

  • No sign shall be attached to a tree, utility pole, fence, or be located in a public right-of-way.
  • All signs must be located on the same zoning lot as the structure or event advertised; off-premise advertising is prohibited except billboards as specifically permitted.
  • No signs may be located within a sight triangle, except for safety-related signs.
  • No freestanding sign shall conflict with drainage or be located in an easement.
  • LED/electronic message/digital signs are prohibited outside the B-2 and B-3 Districts; when permitted they must reduce brightness at dusk, hold messages for at least 8 seconds, not flash, rotate, or display animation, and comply with Exhibit B and INDOT standards.
  • Neon is prohibited except in the B-2, B-3, I-1, OS-1, HS-1, and BP-1 Districts; when permitted, neon may only be used as an accent around the perimeter of the sign and cannot illuminate text or logos; neon may be used to outline window perimeters.
  • Signs that rotate, display animation, flash, revolve, have visible moving parts, or give the appearance of movement are prohibited, except as specifically allowed for electronic message/digital signs subject to Section 150.87.
  • Any sign not included under the types of signs permitted in its district is prohibited.
  • Signs containing obscene, pornographic, immoral, or untruthful matter are prohibited.
  • Signs that emit visible smoke, vapor, particles, or odor are prohibited.
  • Roof signs are prohibited, except those located on a mansard roof.
  • Pennants, streamers, festoon lighting, and other attention-getting devices are prohibited, except as otherwise permitted in this chapter.
  • Inflatable signs are prohibited.
  • Bare bulb illumination is prohibited.
  • Portable signs are prohibited, except as otherwise permitted in this chapter.
  • Any sign or sign structure that constitutes a hazard to public health or safety is prohibited.
  • Billboards are prohibited except as permitted under billboard regulations with required approvals.
  • Vehicle signs are prohibited.
  • Signs that are confusingly similar to, imitate, or may be mistaken for official government markers, traffic signs/signals, or railroad devices are prohibited.
  • Any sign or sign structure that obstructs the view of, may be confused with, or purports to be a governmental or traffic direction/safety sign is prohibited.
  • Murals are prohibited except in the B-1 District with Historic Preservation Commission approval.
  • No sign shall be altered, rebuilt, enlarged, extended, or relocated except in conformity with this chapter.
  • Any sign that does not advertise a bona fide business conducted on the zoning lot or a product sold on the zoning lot is prohibited and must be removed after notice (except approved billboards).

Exempt Signs in Crown Point

  • Changing the advertising copy or message of a painted, plastic face, or printed sign (electric signs are excluded unless specifically designed for replaceable copy).
  • Electrical maintenance, repainting, or cleaning of a sign.
  • Repair of a sign.
  • Placement of temporary signs on real estate for the purpose of sale or lease of that real estate, and temporary construction signs on property where construction is taking place.
  • Political/election signs (subject to Section 150.90).
  • Memorial signs, tablets, or monuments.
  • Address numerals and signs not exceeding 1.5 square feet bearing the names of occupants of premises in residential districts.
  • Governmental flags and insignia and legal notices.
  • Governmental signs.
  • House numbers and name plates for residential housing units identifying occupancy and address.
  • Residential real estate sale/lease/rent signs.
  • Garage/yard sale signs.
  • Utility marker signs necessary to mark cables and lines for public and private utilities, as determined by Public Works.
  • Traffic, directional, and informational signs authorized by a governmental unit.
  • Informational signs such as No Dumping, No Trespassing, No Hunting, Beware of Dog, etc.
  • Seasonal or holiday signs/temporary lighting in connection with holiday observances; not for advertising or product sales; display limited to 45 days.
  • Flags of any country, state, unit of local government, institution of higher learning, or similar institutional flags.
  • Information signs such as “open,” “business hour” signs, and “help wanted” signs not to exceed 1 square foot in area.

Sign Plan & Submission Notes for Crown Point

  • Every sign permit application must include plans drawn to scale showing: sign dimensions; wall surface dimensions (if applicable); dimensions of supporting members; maximum and minimum height; proposed location relative to lot boundaries; and a current photograph of the building face (if applicable).
  • Billboards in B-2 and B-3 Districts (outside the I-65 Corridor) require approval of a special use and site development plan.
  • Billboards in B-2 and B-3 Districts within the I-65 Corridor require approval of a special use and site development plan.
  • Signs in the B-1 Business District are subject to review and approval by the Historic Preservation Commission; projecting sign shape and hanger/bracket supports must satisfy the Downtown Historic District Design Guidelines.
  • Portable advertising signs or displays located within public right-of-way require application to and approval by the Board of Public Works and Safety.
  • Portable advertising signs in the B-1 District are permitted only upon approval by the Board of Works; all temporary signs in the B-1 District must be approved by the Board of Works.
  • Banners, pennants, and feather flags (only in conjunction with opening a new business) require a permit and are subject to review and approval (and potential extension) by the Planning Director.

Source: other municipal code

Frequently Asked Questions

In Crown Point, the height limit for Residential Identification Sign - Freestanding (Multi-family/Non-dwelling buildings) in the Residential District (R-1, R-1A, R-2, R-3) and Conservation District (C-1) is 6 ft max above curb level (Sec. 150.88(C)(1)(a)-(e)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Crown Point require a permit. From the submission notes on this page: Every sign permit application must include plans drawn to scale showing: sign dimensions; wall surface dimensions (if applicable); dimensions of supporting members; maximum and minimum height; proposed location relative to lot boundaries; and a current photograph of the building face (if applicable). Run a code check for an exact address to see the permit requirements for that zone.

Crown Point's sign code covers 26 sign types, including Business Identification Freestanding Sign (On-premise), Temporary Political Signs (All Districts), Temporary Real Estate Sign (≤20 acres) (All Districts), and Temporary Real Estate Sign (Over 20 acres) (All Districts). Most commercial signs need a permit. The ordinance lists 18 exemptions. One of them: Repair of a sign. The full list is on this page.

Rules in Crown Point's sign ordinance that cover digital, changing, or flashing signs: LED/electronic message/digital signs are prohibited outside the B-2 and B-3 Districts; when permitted they must reduce brightness at dusk, hold messages for at least 8 seconds, not flash, rotate, or display animation, and comply with Exhibit B and INDOT standards. Signs that rotate, display animation, flash, revolve, have visible moving parts, or give the appearance of movement are prohibited, except as specifically allowed for electronic message/digital signs subject to Section 150.87. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Crown Point Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Crown Point, Indiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds