Sign Regulations in Jasper, Indiana
Jasper, Indiana has specific sign regulations covering 27 sign types across 7 zoning districts. Regulated sign types include Wall Sign, Awning Sign, Window Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: November 6, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Jasper, Indiana
Sample Sign Requirements in Jasper
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Real Estate Sign | Not listed | 9 square feet in residential districts; 32 square feet in other districts | Not listed |
| Real Estate Open House Sign | 30 inches | 4 square feet | Not listed |
| Sandwich Board Sign | 4 feet | 8 square feet | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
27
- Wall Sign
- Awning Sign
- Window Sign
- Wall Sign (>50 ft from public way)
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Jasper
Other Cities in Indiana
Frequently Asked Questions
In Jasper, the height limit for Pole/Pylon Sign in the Business Districts (B1, B3) is 30 feet max; 14 feet min. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Jasper require a permit. From the submission notes on this page: The Commission may approve additional construction signage in conjunction with any plan approval. Run a code check for an exact address to see the permit requirements for that zone.
Jasper's sign code covers 27 sign types, including Wall Sign, Awning Sign, Window Sign, and Wall Sign (>50 ft from public way). Most commercial signs need a permit. The ordinance lists 15 exemptions. One of them: Utility Marker Signs, which include those used to mark cables and lines for public utilities, unless determined by the Administrator to be a hazard. The full list is on this page.
In Jasper, Billboard in the Industrial Districts (I1, I2) must be set back 250 feet from intersection. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Jasper's sign ordinance that cover digital, changing, or flashing signs: Electronic variable message signs (EVMS) that flash, scroll, twirl, change color, fade in or out, display changeable copy, or imitate movement in any manner are prohibited. (With performance standards if authorized.). Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Jasper Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Jasper, Indiana, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Jasper, Indiana Sign Rules at a Glance
Jasper, Indiana regulates 27 sign types across 7 zoning districts. Sandwich Board Signs are capped at 4 feet tall, 8 square feet, and 2 feet wide. Most commercial signs in Jasper require a permit.
Detailed Sign Ordinance Requirements for Jasper, Indiana
Sign Rules by Zoning District in Jasper (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 14 | 30 inches | 45 square feet for banners; 18 square feet for feather banners | Not listed |
| Agricultural Districts (A1, A2) | 3 | 5 feet | 24 square feet aggregate for all signs on premises | Not listed |
| Residential Districts (RR, R1, R2, R3, R4, MH) | 3 | 5 feet | 24 square feet aggregate for all signs on premises | Not listed |
| Business Districts (B1, B3) | 8 | 30 feet max; 14 feet min | 200 square feet | Not listed |
| Industrial Districts (I1, I2) | 9 | 30 feet max; 14 feet min | 300 square feet | Not listed |
| Conservation Park District (CP) | 8 | 30 feet max; 14 feet min | 200 square feet | Not listed |
| Central Business District (B2) | 4 | Not listed | 200 square feet max (min 40 sq ft) | Not listed |
Zone-by-Zone Sign Requirements in Jasper(sample of 3 of 7 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Integral Identification Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Integral part of the structure | Not listed | Unlock | 8.3 A.1 |
| Utility Marker Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Marking cables and lines for public utilities | Not listed | Unlock | 8.3 A.3 |
| Real Estate Sign | Not listed | 9 square feet in residential districts; 32 square feet in other districts | Not listed | Not listed | 1 | On premises available for sale, lease, or rental | Not listed | Unlock | 8.3 A.4 |
| Real Estate Open House Sign | 30 inches | 4 square feet | Not listed | Not listed | Not listed | Directional on premises | Not listed | Unlock | 8.3 A.5 |
| Sandwich Board Sign | 4 feet | 8 square feet | 2 feet | Not listed | 1 | Within 10 feet of main entrance of business | Not listed | Unlock | 8.3 A.6 |
| Banner - Commercial | Not listed | 45 square feet for banners; 18 square feet for feather banners | Not listed | Not listed | 1 | Not listed | Not listed | Unlock | 8.3 A.10 |
| Construction Sign | Not listed | 6 square feet in single-family residential districts; 32 square feet in other districts | Not listed | Not listed | 2 | On active construction site | Not listed | Unlock | 8.3 A.11 |
| Directional Sign | 4 feet | 4 square feet | Not listed | Not listed | Not listed | On business premises for vehicular/pedestrian traffic | Not listed | Unlock | 8.3 A.12 |
Business Districts (B1, B3)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 100 square feet | Not listed | Not listed | Not listed | On facade of primary structure | Not listed | Unlock | 8.7 B, C.1.a |
| Wall Sign (>50 ft from public way) | Not listed | 200 square feet | Not listed | Not listed | Not listed | On facade of primary structure | Not listed | Unlock | 8.7 B, C.1.b |
| Awning Sign | Not listed | Included in aggregate building sign area | Not listed | Not listed | Not listed | Printed or sewn on awning on facade of primary structure | Not listed | Unlock | 8.7 C.2 |
| Window Sign | Not listed | Included in aggregate if >25% of window area | Not listed | Not listed | Not listed | On windows of structure | Not listed | Unlock | 8.7 C.3 |
| Pole/Pylon Sign | 30 feet max; 14 feet min | 80 square feet | Not listed | Not listed | 1 (either pole or monument) | Not listed | Not listed | Unlock | 8.7 D.1 |
| Monument Sign | 7 feet | 50 square feet | Not listed | Not listed | 1 (either pole or monument) | Not listed | Not listed | Unlock | 8.7 D.2 |
| Temporary Business Sign | Not listed | 32 square feet | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 8.7 F |
| Freestanding Sign - Multi-Tenant Center | 30 feet | 200 square feet (monument support not counted) | Not listed | Not listed | 1 | Not listed | Not listed | Unlock | 8.7 E |
Industrial Districts (I1, I2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 100 square feet | Not listed | Not listed | Not listed | On facade of primary structure | Not listed | Unlock | 8.7 B, C.1.a |
| Wall Sign (>50 ft from public way) | Not listed | 200 square feet | Not listed | Not listed | Not listed | On facade of primary structure | Not listed | Unlock | 8.7 B, C.1.b |
| Awning Sign | Not listed | Included in aggregate building sign area | Not listed | Not listed | Not listed | Printed or sewn on awning on facade of primary structure | Not listed | Unlock | 8.7 C.2 |
| Window Sign | Not listed | Included in aggregate if >25% of window area | Not listed | Not listed | Not listed | On windows of structure | Not listed | Unlock | 8.7 C.3 |
| Pole/Pylon Sign | 30 feet max; 14 feet min | 80 square feet | Not listed | Not listed | 1 (either pole or monument) | Not listed | Not listed | Unlock | 8.7 D.1 |
| Monument Sign | 7 feet | 50 square feet | Not listed | Not listed | 1 (either pole or monument) | Not listed | Not listed | Unlock | 8.7 D.2 |
| Freestanding Sign - Multi-Tenant Center | 30 feet | 200 square feet (monument support not counted) | Not listed | Not listed | 1 | Not listed | Not listed | Unlock | 8.7 E |
| Billboard | 12 feet (total from ground 20 feet) | 300 square feet | 25 feet | 250 feet from intersection; 500 feet from sensitive uses if >24 sq ft | Not listed | In I2 district only | Not listed | Unlock | 8.7 G |
PermitPal covers all 7 zoning districts in Jasper. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Jasper
- Emitting Signs, which include signs that emit audible sounds, odors, or visible matter.
- Imitating Signs, including those that purport to be, are in imitation of, or resemble a Public Sign or signal, such as those bearing the words, STOP, SLOW, CAUTION, DANGER, WARNING, or any other word, phrase, symbol, or character in such a manner to suggest, interfere with, mislead, or confuse motorists.
- Imitating Vehicles, including signs that may be construed as a light of an emergency or road equipment vehicle.
- Visually Obstructing Signs, which include signs that hide any traffic or roadway sign, signal, or device from view, and signs that do not comply with the regulations of Section 7.2 Sight Visibility Triangle.
- Obscene Signs, which shall be limited to those that contain statement, words, or pictures that are obscene within the meaning of IC 35-49-2-1.
- Encroaching Signs, which include those located in a public way or posted on a utility pole or street sign, as well as signs that project into a public way, unless they are approved by the Board of Public Works and Safety. Encroaching signs do not include publicly-owned signs, such as traffic control signs and directional signs.
- Physically Obstructing Signs, which include those that obstruct any door, fire escape, stairway, or other opening intended to provide ingress or egress for any structure.
- Poster Signs, which include posters, placards, and other similar types of signage that are attached to utility poles, trees, or other outdoor fixtures, except those that are permitted under Subsection 8.7(G) as Temporary Business Signs.
- Portable Signs, except those that are exempt under Section 8.3 Exemptions or permitted under Subsection 8.7(G) as Temporary Business Signs.
- Inflatable signs or inflatable characters, and the like, including items that contain distinctive color, pattern or symbols, which refer to the offer for sale, or existence for sale of products, property, accommodations, services or attractions or activities.
- Vehicles Used as Signs: It shall be prohibited, in all zoning districts, to park or use a vehicle in such a way as to function as a sign, defined to include the parking of any vehicle, trailer or similar movable structure containing or supporting any signage between the right-of-way line and any public street; and the Front Line of a Building and the Front Lot Line of the Lot, whichever area is greater. (With specified exceptions for active construction, deliveries, screened parking, etc.)
- Electronic variable message signs (EVMS) that flash, scroll, twirl, change color, fade in or out, display changeable copy, or imitate movement in any manner are prohibited. (With performance standards if authorized.)
- Off-premise commercial signs are prohibited throughout the jurisdiction, except as provided in Subsection 8.7(H) Billboards.
- No sign shall be placed on private or public property without the written consent of the owner or agent thereof.
- No sign may be erected, constructed, enlarged, or moved into a location which would cause it to violate the regulations of Section 7.2 Sight Visibility Triangle.
Exempt Signs in Jasper
- Integral Identification Features, including the names of buildings, their date of erection, monumental citations, commemorative tablets, and the like, when carved into stone, concrete, or similar construction, or similar material, or made of bronze, aluminum, or another permanent type of material and made an integral part of the structure.
- Public Signs, including those placed by or at the instruction of the Board of Public Works and Safety, a federal, state, or county agency, or a firefighter or law enforcement officer while performing official duties, such as signs to promote public safety, no trespassing signs, traffic control signs, memorial plaques, historical markers, and directional signs related to public or quasi-public facilities or events.
- Utility Marker Signs, which include those used to mark cables and lines for public utilities, unless determined by the Administrator to be a hazard.
- Real Estate Signs, which shall be limited to one sign displayed on any premises while the premises are available for sale, lease, or rental, so long as: a. The face of the sign does not exceed 9 square feet in area (for premises located in residential districts) or 32 square feet in area (for premises located in other zoning districts); and b. The sign is removed within 14 days after the premises are no longer available for sale, lease, or rental.
- Real Estate Open House Signs, which shall be limited to directional type signage that does not exceed 4 square feet in area and 30 inches in height, and which shall not be installed more than 72 hours before the respective open house and shall be removed within 6 hours after the respective open house.
- Sandwich Board Signs, which shall be limited to one sign displayed on any premises used for business purposes, so long as: a. The sign does not exceed four (4) feet in height, two (2) feet in width or eight (8) square feet in area; b. The sign is located within 10 feet of the main entrance of the business for which it is established; and c. The sign is not illuminated.
- Sponsorship Signs, which include those located inside a publicly owned recreational facility, so long as: a. They are placed on areas that are part of the facility; b. They are visible only to participants or spectators at the facility; and c. They are approved by the Jasper Department of Parks and Recreation or other respective governing board of the facility before installation.
- Pennants, so long as they do not extend into a public way and are used no more than 30 days during any 3 month period. However, pennants may not be used in conjunction with banners or other exempt signage.
- Banners (when approved by the Administrator for installation at either or both of the following public locations): a. Near the water tower on North Newton Street; and b. Near the Maypole, at the corner of 6th Street and Newton Street.
- Banners (for commercial uses only), so long as: a. They do not extend into a public way; b. They do not exceed one per property, or one per business (where more than one business is located on a property); c. They do not exceed: 45 square feet in face area for banners; or 18 square feet for feather banners; and d. They are used no more than 14 days during any 2 month period.
- Construction Signs, which shall be limited to 2 signs displayed on any active construction site, so long as: a. The face of each sign does not exceed 6 square feet in area (for premises located in single-family residential districts) or 32 square feet in area (for premises located in other zoning districts); b. The signs comply with the regulations of Section 7.2 Sight Visibility Triangle; and c. The signs are removed within 14 days after completion of the respective construction activity. However, the Commission, in its discretion, may approve, in conjunction with any plan approval, additional signage to be displayed on any active construction site for the duration of the construction period.
- Directional Signs, which shall be limited to signs providing directional information for vehicular or pedestrian traffic on premises used for business purposes, so long as no sign exceeds 4 feet in height or 4 square feet in area.
- Event Promotional Signs, which include noncommercial signs promoting garage or yard sales or community events, so long as: a. The face of the sign does not exceed 4 square feet in area; b. The sign is installed not more than 7 days in advance of the sale or event; and c. The sign is removed within 48 hours after the close of the sale or event.
- Exemption where certain outdoor advertising signs are obstructed: Pursuant to IC 8-23-20-25.6, if a conforming outdoor advertising sign is no longer visible or becomes obstructed due to specified reasons, the owner may elevate or relocate the sign within 500 feet without a new permit, if compliant.
- Indoor Signs: A sign that is located completely within an enclosed structure is exempt from this Chapter, unless the sign is placed inside of and within two (2) feet of a window, or upon the window panes or glass. If viewable from outside, treated as outdoor sign.
Sign Plan & Submission Notes for Jasper
- A signage plan for a multi-tenant commercial center must be submitted to the Administrator for approval before any sign is installed, including layout identifying maximum number of tenants and proposed placement of all signs on structures. Minimum 40 sq ft per tenant; if aggregate exceeds 300 sq ft, no more than 40 sq ft per tenant. Updates must conform within 5 years.
- The Commission may approve additional construction signage in conjunction with any plan approval.
- Individual free-standing signs for each tenant in a multi-tenant commercial center are not permitted unless approved by variance granted by the JBZA.
- Advertising signs in agricultural and residential districts are not permitted unless approved by variance granted by the JBZA.
- Billboards may be permitted by the JBZA as a special exception in I2 districts.
- A variance granted by the JBZA for a nonconforming sign after April 1, 2019, shall specify an expiration date not more than 15 years after granting.
Source: other municipal code