Questions? Call us at (262) 218-2915

Sign Regulations in Rushville, Indiana

Rushville, Indiana has specific sign regulations covering 24 sign types across 8 zoning districts. Regulated sign types include Ground/Monument Sign, Wall Sign, Awning Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: November 22, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Rushville, Indiana

Sample Sign Requirements in Rushville

Sign TypeMax HeightMax AreaSetback
Ground/Monument Sign6 ft36 sq ft per sign10 ft from public right-of-way (Section F.7.a)
Wall SignNot listed100 sq ft (Maximum Wall Sign Size, Step 3)Not listed
Awning SignBottom of awning ≥8.5 ft above finished gradeNot listedNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RushvilleFull Coverage

Sign Types Covered

24

  • Ground/Monument Sign
  • Wall Sign
  • Awning Sign
  • Projecting Sign (One per business)
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Rushville

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Rushville, the height limit for Ground/Monument Sign in the C-1 zoning district is 8 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Rushville require a permit. From the submission notes on this page: Where a monument-style unified development sign is not feasible (as determined by the Executive Director), a pylon sign may be used if approved as part of a site development plan. Run a code check for an exact address to see the permit requirements for that zone.

Rushville's sign code covers 24 sign types, including Ground/Monument Sign, Wall Sign, Awning Sign, and Projecting Sign (One per business). Most commercial signs need a permit. The ordinance lists 12 exemptions. One of them: Emergency signs used and authorized by the Board of Public Works. The full list is on this page.

In Rushville, Ground/Monument Sign in the CBD zoning district must be set back 10 ft from public right-of-way. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Rushville's sign ordinance that cover digital, changing, or flashing signs: Animated signs utilizing flashing lights, motion picture, laser, or visual projection of images or copy are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Rushville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rushville, Indiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Rushville, Indiana Sign Rules at a Glance

Rushville, Indiana regulates 24 sign types across 8 zoning districts. Temporary Signs are capped at 4 ft tall and 12 sq ft, set back at least 10 ft from right-of-way and property lines. Most commercial signs in Rushville require a permit.

Detailed Sign Ordinance Requirements for Rushville, Indiana

Sign Rules by Zoning District in Rushville (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
R-316 ft36 sq ft per signNot listed
R-45Bottom of awning ≥8.5 ft above finished grade100 sq ft (Maximum Wall Sign Size, Step 3)Not listed
CBD10Bottom of awning ≥8.5 ft above finished grade200 sq ft (Maximum Wall Sign Size, Step 3)Not listed
C-110Bottom of awning ≥8.5 ft above finished grade200 sq ftNot listed
C-29Bottom of awning ≥8.5 ft above finished grade200 sq ftNot listed
M-19Bottom of awning ≥8.5 ft above finished grade200 sq ftNot listed
General Regulations For All Zones14Up to 8 ft; shall not exceed height of tallest building in developmentUp to 200 sq ftNot listed
Start free to see 1 more zone

Zone-by-Zone Sign Requirements in Rushville(sample of 3 of 8 zones)

CBD

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed200 sq ft (Maximum Wall Sign Size, Step 3)Not listedNot listedNot listedOn facade of primary structure facing a public or private street (Section F.5).Not listedUnlockArticle X – Step 2 (Wall Sign: P in CBD); Step 1 (2 sq ft/lf); Step 3 (Max Wall Sign Size 200 sq ft; +25% for multi-tenant joint signs); Section F.5.
Awning SignBottom of awning ≥8.5 ft above finished gradeNot listedNot listedNot listedNot listedMounted on facade of principal structure.Not listedUnlockArticle X – Step 2 (Awning Sign: P in CBD); Section F.4.
Projecting Sign (One per business)Not listed24 sq ftNot listedNot listed1 per businessNot listedNot listedUnlockArticle X – Step 2 (Projecting Sign: P in CBD, one per business); Step 3 (Max 24 sq ft).
Window SignNot listedCoverage up to 25% of window area (Step 3)Not listedNot listedNot listedWithin window area.Not listedUnlockArticle X – Step 2 (Window Sign: P in CBD); Step 3 (Max Window Coverage 25%); Section H.10 (exempt window signs).
Ground/Monument Sign6 ft36 sq ft per signNot listed10 ft from public right-of-way1 per lotGround mounted, monument-type.Not listedUnlockArticle X – Second table (Ground/Monument: P); Step 3 (Max Ground/Monument Height 6 ft; +25% for multi-tenant joint signs); Section F.7; Section F.6.
Free-standing/Pylon Sign (Special Exception)Not listed32 sq ftNot listedNot listedNot listedOn site of the use identified (Section F.1 and Section 9.a.iii for EMB context).Not listedUnlockArticle X – Step 2 (Free-standing/Pylon: S in CBD); Step 3 (Max Free-standing/Pylon Sign Area 32 sq ft); Section F.1.b.
Electronic Message BoardNot listedNot listedNot listed≥100 ft from residential districts; ≥125 ft from signalized intersectionsNot listedOn site of the use identified/advertised; not within 125 ft of a signalized intersection (Section 9.a.iii, 9.a.ii).Not listedUnlockArticle X – Second table (Electronic Message Board: P in CBD); Section 9.a–9.g.
Wall Sign (Upper-floor Uses)Not listed50 sq ft (upper-floor total)Not listedNot listedNot listedBetween eaves/cornice/roof element and top of windows on uppermost floor (Section D.2).Not listedUnlockArticle X – Section D.1–D.2; Step 3 (Maximum Multiple-floor Sign Area 50 sq ft for CBD).

C-1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed200 sq ftNot listedNot listedNot listedOn facade facing public/private street.Not listedUnlockArticle X – Step 2 (Wall Sign: P C-1); Step 1; Step 3 (+25% multi-tenant); Section F.5.
Awning SignBottom of awning ≥8.5 ft above finished gradeNot listedNot listedNot listedNot listedMounted on facade of principal structure.Not listedUnlockArticle X – Step 2 (Awning Sign: P C-1); Section F.4.
Projecting Sign (One per business)Not listed24 sq ftNot listedNot listed1 per businessNot listedNot listedUnlockArticle X – Step 2 (Projecting Sign: P C-1); Step 3 (Max 24 sq ft).
Window SignNot listedCoverage up to 25% of window area (Step 3)Not listedNot listedNot listedWithin window area.Not listedUnlockArticle X – Step 2 (Window Sign: P C-1); Step 3 (Max Window Coverage 25%); Section H.10.
Ground/Monument Sign8 ft36 sq ft per signNot listed10 ft from public right-of-way1 per lotGround mounted, monument-type.Not listedUnlockArticle X – Second table (Ground/Monument: P); Step 3 (Max Ground/Monument Height 8 ft; +25% multi-tenant); Section F.7; Section F.6.
Free-standing/Pylon Sign (Special Exception)Not listed50 sq ftNot listedNot listedNot listedOn site of the use identified/advertised.Not listedUnlockArticle X – Step 2 (Free-standing/Pylon: S C-1); Step 3 (Max Free-standing/Pylon Sign Area 50 sq ft); Section F.1.b.
Electronic Message BoardNot listedNot listedNot listed≥100 ft from residential districts; ≥125 ft from signalized intersectionsNot listedOn site of the use; not within 125 ft of a signalized intersection.Not listedUnlockArticle X – Second table (EMB: P C-1); Section 9.a–g.
Wall Sign (Upper-floor Uses)Not listed50 sq ft (upper-floor total)Not listedNot listedNot listedBetween eaves/cornice/roof element and top of windows on uppermost floor.Not listedUnlockArticle X – Section D.1–D.2; Step 3 (Multiple-floor Sign Area 50 sq ft for C-1).

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Unified Development Sign (Freestanding)Up to 8 ft; shall not exceed height of tallest building in developmentUp to 200 sq ftNot listedNot listedNot listedFor unified developments under common ownership/management with shared parking; replaces individual freestanding signs.Not listedUnlockArticle X – Section F.1.a–d.
Subdivision Entry Sign6 ft32 sq ft per signNot listed≥2 ft from right-of-way (except medians); not in required visible sight distance areas1 double-sided or 2 single-sided per entranceAt entrance(s) to subdivision, apartment complex, or residential development; may be in median of boulevard if not within required sight distance areas.Not listedUnlockArticle X – Section F.2.a–v.
Model Home/Temporary Sales Facility SignsNot listedSales facility total ≤32 sq ft; each individual model home sign ≤4 sq ftNot listedModel home sign: ≥10 ft from ROW and property lines1 per model home; sales facility limited by total areaOn lot of sales facility or individual model home.Not listedUnlockArticle X – Section F.11.a–c.
Construction SignsNot listedResidential districts: ≤6 sq ft per sign; non-residential districts: ≤32 sq ft per signNot listedNot listed≤2 per propertyOn construction site; outside right-of-way.Not listedUnlockArticle X – Section F.14.a–d.
Temporary Signs≤4 ft≤12 sq ftNot listed≥10 ft from ROW and property linesNot listedNot listedNot listedUnlockArticle X – Section G.1–2.a–e.
Sandwich Board Sign (Temporary)≤4 ft≤8 sq ft≤2 ftWithin 10 ft of primary entrance1 per businessWithin 10 ft of the primary entrance of the business using the sign.Not listedUnlockArticle X – Section G.2.f–i.
Directional Signs (On-premise, Exempt)≤4 ft≤8 sq ftNot listed≥2 ft from ROWNot listedOn-premise; ≥2 ft from public right-of-way.Not listedUnlockArticle X – Section H.9.
Political/Opinion Signs (Exempt conditions)Opinion signs: <3 ftResidential: ≤6 sq ft per sign; Non-residential: ≤32 sq ft per sign; Opinion signs: <9 sq ftNot listed≥5 ft from property line (opinion signs); not in ROW (political signs).Opinion: ≤2 per residential unit; Political: up to number of offices/issues on ballotPlaced ≥5 ft from property line; not in public right-of-way.Not listedUnlockArticle X – Section H.11–12.

PermitPal covers all 8 zoning districts in Rushville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Rushville

  • Erecting, constructing, enlarging, moving, or converting any sign without first obtaining a sign permit (unless exempt).
  • Maintaining signs in disrepair or unsafe/unsightly condition; owners must repair within 10 days of notice and repair damaged areas within 30 days after sign removal.
  • Maintaining abandoned sign structures; signs unused for six months are deemed abandoned and all structures/elements must be removed at the owner's expense.
  • Illuminated signs may not create traffic hazards through direct or reflected light, must be shaded/shielded to prevent light spillage onto adjacent properties, and may not exceed 0.3 foot-candles at residential property lines or 0.5 foot-candles at non-residential property lines; illuminating elements must be kept in working condition and sign components must meet electrical code/UL requirements.
  • Off-premise signs are prohibited.
  • Individual pole signs are prohibited.
  • Portable signs are prohibited.
  • Animated signs utilizing flashing lights, motion picture, laser, or visual projection of images or copy are prohibited.
  • Signs that emit audible sound, odor, or visible matter are prohibited.
  • Signs that imitate or resemble official traffic signs/signals or bear words like “Stop,” “Slow,” “Caution,” “Danger,” “Warning,” or similar are prohibited.
  • Signs that may be construed as lights of an emergency or road equipment vehicle are prohibited.
  • Signs that hide traffic or roadway signs/signals/devices or interfere with sight visibility are prohibited.
  • Signs located in any right-of-way, including those posted on utility poles or street signs, are prohibited.
  • Signs that obstruct any door, fire escape, stairway, or any opening intended for entrance/exit of a structure are prohibited.
  • Signs placed on vehicles or trailers parked on public or private property primarily to display the sign are prohibited (exceptions: vehicles parked for lawful deliveries/sales/service calls; vehicles customarily used for transporting persons/property; vehicles parked at a driver's residence during non-business hours).
  • Posters, placards, and similar signs attached to light poles, gas station canopy supports, trees, and similar outdoor locations are prohibited.
  • Signs mounted to the roof of a structure or mounted to a wall and extending above the wall are prohibited.
  • Home occupation signs are prohibited.
  • Inflatable signs are prohibited.

Exempt Signs in Rushville

  • Integral identification features (e.g., building names, dates, monumental citations, commemorative tablets) carved into permanent materials or made of durable metals and integral to the structure.
  • Public signs erected by or on order of public officials in performance of public duty (e.g., safety, no trespassing, traffic signs), memorial plaques, signs of historical interest, and signs directing to public facilities.
  • Utility marker signs necessary to mark cables and lines for public and private utilities.
  • On-premises real estate signs outside of the right-of-way, limited to no more than two per property; maximum 6 sq ft per sign in residential districts and 32 sq ft per sign in all other districts. Subdivisions may have one temporary sign not exceeding 32 sq ft.
  • Emergency signs used and authorized by the Board of Public Works.
  • Sponsorship signs inside athletic fields and other athletic/community facilities, oriented to facility users, for no more than 90 days per calendar year.
  • Pennants, streamers, and combinations thereof, not located in a right-of-way, used temporarily for no more than 30 days in any three-month period.
  • One banner per business, not exceeding 24 sq ft, limited to 30 days of use in any four-month period.
  • On-premises directional signs up to 4 ft in height or 8 sq ft in area, set back at least 2 ft from all public rights-of-way, and free of advertising.
  • Window signs not exceeding 10% of the window area; individual letters no greater than 3 inches.
  • Temporary non-commercial opinion signs: at least 5 ft from the property line and not in the public right-of-way; not illuminated; less than 9 sq ft and 3 ft in height; no more than two per residential unit per calendar year; displayed no more than six consecutive months per calendar year.
  • Political signs permitted for 60 days for primary, general, or special elections; must be removed within 5 days after Election Day; maximum number equal to the number of offices/issues on the local ballot; size limited to 6 sq ft in residential districts and 32 sq ft in non-residential districts.

Sign Plan & Submission Notes for Rushville

  • A sign permit is required before erecting, constructing, enlarging, moving, or converting any sign (unless the sign is exempt).
  • Temporary signs require a permit for a specified length of time.
  • Anyone wishing to vary from the stated sign standards must obtain a development standards variance from the Board of Zoning Appeals.
  • Pylon signs may be allowed as a freestanding unified development sign only as a special exception.
  • Where a monument-style unified development sign is not feasible (as determined by the Executive Director), a pylon sign may be used if approved as part of a site development plan.
  • In the sign matrix, free-standing/pylon signs are identified as 'S' (Special Exception) in applicable districts, indicating Special Exception approval is required.
  • Subdivision entrance signs, associated landscaping, and decorative walls must be shown on development plans, site plans, and subdivision plats.

Source: other municipal code