Questions? Call us at (262) 218-2915

Sign Regulations in Seymour, Indiana

Seymour, Indiana has specific sign regulations covering 20 sign types across 8 zoning districts. Regulated sign types include Building Marker, Incidental Sign, Identification Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Seymour, Indiana

Sample Sign Requirements in Seymour

Sign TypeMax HeightMax AreaSetback
Freestanding Sign (Residential)8 feet40 square feetMinimum 6 feet (except NA for RS RS-1). Sign height shall not exceed sign setback and shall comply with intersection visibility.
Building MarkerNot listed4 square feetNot listed
Freestanding Sign (Business)35 feet100 square feet per sign; 200 square feet total per lotMinimum 6 feet

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for SeymourFull Coverage

Sign Types Covered

20

  • Building Marker
  • Incidental Sign
  • Identification Sign
  • Banner
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Seymour, the height limit for Freestanding Sign (Business) in the C-1, C-2 zoning districts is 35 feet. Maximum sign heights range from 8 feet to 35 feet across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Seymour require a permit. From the submission notes on this page: The form and content of sign permit applications must conform to the Plan Commission Rules of Procedure. Run a code check for an exact address to see the permit requirements for that zone.

Seymour's sign code covers 20 sign types, including Building Marker, Incidental Sign, Identification Sign, and Banner. Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Political signs. The full list is on this page.

In Seymour, Freestanding Sign (Business) in the C-1, C-2 zoning districts must be set back at least 6 feet. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Seymour's sign ordinance that cover digital, changing, or flashing signs: Using audio speakers or any form of pyrotechnics in association with electronic message center signs. Animated signs (e.g., moving, fluttering, rotating), pennants, flags, balloons, streamers, inflatable devices, or propellers, unless otherwise allowed in district-specific tables. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Seymour Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Seymour, Indiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Seymour, Indiana Sign Rules at a Glance

Seymour, Indiana regulates 20 sign types across 8 zoning districts. Temporary Freestanding Signs in the C-5, I-1 zoning districts are capped at 35 feet tall and 100 square feet, with a minimum 6 feet setback. Most commercial signs in Seymour require a permit.

Detailed Sign Ordinance Requirements for Seymour, Indiana

Sign Rules by Zoning District in Seymour (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
RS RS-1, R-1, R-2, R-3, R-448 feet40 square feetNot listed
C-1, C-21635 feet100 square feet per sign; 200 square feet total per lotNot listed
C-3, C-41635 feet100 square feet per sign; 200 square feet total per lot (C-4: max 75 sq ft or 1 sq ft per 2 linear ft of building façade, whichever is smaller)Not listed
C-5, I-11735 feet280 square feetNot listed
I-21635 feet100 square feet per sign; 200 square feet total per lotNot listed
Institutional park, open space3Not listed4 square feetNot listed
General Regulations For All Zones2Not listedAs authorized by permit; in right-of-way: no more than 2 sq. ft.Not listed
Start free to see 1 more zone

Zone-by-Zone Sign Requirements in Seymour(sample of 3 of 8 zones)

C-1, C-2

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Business)35 feet100 square feet per sign; 200 square feet total per lotNot listedMinimum 6 feetNot specified per lot (limited by total area).At least 6 feet from property lines.Not listedUnlock§157.095(E)(1) Signs by Type and Zoning District Table; Number, Height, and Setback Table
Temporary Freestanding Sign35 feet100 square feet (max area assumes matches permanent business sign area for C zones)Not listedMin 6 feetNot listedMinimum 6 feet setback.Not listedUnlock§157.095(E)(1) Signs by Type and Zoning District Table; §157.095(F)
BannerNot listedIf >2 sq. ft, permit required; if 2 sq. ft or less, exempt.Not listedNot listedNot listedBuilding or frontage; min. vertical clearance 9 feet over sidewalk/drive, 12 feet over street.Not listedUnlock§157.095(E)(1) Signs by Type and Zoning District Table; Number and Dimension of Signs by Type Table
Building MarkerNot listed4 square feetNot listedNot listed1 per buildingPer building.Not listedUnlock§157.095(E)(1) Signs by Type and Zoning District Table
Canopy SignNot listed25% of vertical surfaceNot listedNot listed1 per buildingOn or attached to canopy/awningNot listedUnlock§157.095(E)(1) Table; Number and Dimension of Signs by Type Table
Identification SignNot listedNot listedNot listedNot listed1 per buildingPer building.Not listedUnlock§157.095(E)(1) Signs by Type Table
Roof (Integral) SignNot listedNot listedNot listedNot listed1 per principal buildingOn building roof, integral.Not listedUnlock§157.095(E)(1) Table; Definitions
Suspended SignNot listedNot listedNot listedNot listed1 per entranceAt entrance or horizontal surface, min. clearance 9 ft (sidewalk), 12 ft (street)Not listedUnlock§157.095(E)(1) Table

C-3, C-4

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Business)35 feet100 square feet per sign; 200 square feet total per lot (C-4: max 75 sq ft or 1 sq ft per 2 linear ft of building façade, whichever is smaller)Not listed6 feet min. from property line. For C-4, see above.Limited by total areaAt least 6 feet setback (all), may be within right-of-way in C-4 if not impeding traffic.Not listedUnlock§157.095(E)(1) Table; (E)(2)(a), (2)(b)
Temporary Freestanding Sign35 feet100 square feet (unless further restricted by total sign area)Not listedMin. 6 feetNot listedMin. 6 feet setback.Not listedUnlock§157.095(E)(1) Table; §157.095(F)
BannerNot listedIf >2 sq ft, permit requiredNot listedNot listedNot listedOn building or as sign (vertical clearance: 9 ft/sidewalk; 12 ft/street).Not listedUnlock§157.095(E)(1) Table; Number and Dimension Table
Building MarkerNot listed4 square feetNot listedNot listed1 per buildingPer buildingNot listedUnlock§157.095(E)(1) Table; Maximum Sign Area Table
Canopy SignNot listed25% of vertical surfaceNot listedNot listed1 per buildingOn or attached to canopy/awning.Not listedUnlock§157.095(E)(1) Table; Number and Dimension Table
Identification SignNot listedNot listedNot listedNot listed1 per buildingPer buildingNot listedUnlock§157.095(E)(1) Table
Roof (Integral) SignNot listedNot listedNot listedNot listed1 per principal buildingOn building roof, integral.Not listedUnlock§157.095(E)(1) Table
Suspended SignNot listedNot listedNot listedNot listed1 per entranceAt entrance or horizontal surface, min. clearance 9 ft/sidewalk, 12 ft/street.Not listedUnlock§157.095(E)(1) Table; Number and Dimension Table

C-5, I-1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Business)35 feet100 square feet per sign; 200 square feet total per lotNot listedMin. 6 feetNot listedAt least 6 feet setback.Not listedUnlock§157.095(E)(1) Table; Number, Height, Setback Table
Temporary Freestanding Sign35 feet100 square feetNot listedMin. 6 feetNot listedMin. 6 feet setback.Not listedUnlock§157.095(E)(1) Table; §157.095(F)
BannerNot listedPermit required if larger than 2 sq. ft.Not listedNot listedNot listedBuilding or on site; min. vertical clearance 9 ft sidewalk, 12 ft street.Not listedUnlock§157.095(E)(1) Table; Number and Dimension Table
Building MarkerNot listed4 square feetNot listedNot listed1 per buildingPer buildingNot listedUnlock§157.095(E)(1) Table; Maximum Sign Area Table
Canopy SignNot listed25% of vertical surfaceNot listedNot listed1 per buildingOn or attached to canopy/awning.Not listedUnlock§157.095(E)(1) Table
Identification SignNot listedNot listedNot listedNot listed1 per buildingPer building.Not listedUnlock§157.095(E)(1) Table
Roof (Integral) SignNot listedNot listedNot listedNot listed1 per principal buildingOn building roof, integral.Not listedUnlock§157.095(E)(1) Table
BillboardNot listed280 square feetNot listedNot listedLimited by distance, not lotC-5; along interstates.Not listedUnlock§157.095(E)(1) Table, note 3

PermitPal covers all 8 zoning districts in Seymour. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Seymour

  • Erecting, placing, establishing, painting, creating, or maintaining any sign except in conformance with city sign regulations.
  • Installing, creating, erecting, maintaining, or altering a sign without obtaining a required permit.
  • Installing, creating, erecting, maintaining, or altering a sign in a way that is inconsistent with any plan or permit governing such sign.
  • Signs that interfere with visibility for drivers or pedestrians or in any other way endanger public health or safety.
  • Signs attached to public light poles, street signs, traffic control signs, or other public standards, utility poles, or trees, or other signs located in the public right-of-way, other than those specifically permitted by ordinance.
  • Placing or maintaining any unauthorized sign, signal, marking, or device upon or in view of any highway that imitates, resembles, or interferes with an official traffic-control device or railroad sign or signal, or attempts to direct the movement of traffic, or hides from view or interferes with the effectiveness of any official traffic-control device or railroad sign or signal.
  • Placing or maintaining any traffic sign or signal on any highway bearing any commercial advertising.
  • Altering, defacing, injuring, knocking down, or removing any official traffic-control device, railroad sign or signal, street sign, or associated structure without lawful authority.
  • Failing to remove any sign that is installed, created, erected, altered, or maintained in violation of sign regulations.
  • Maintaining signs on any building or lot that is vacant or abandoned; such signs must be removed by the property owner.
  • Using audio speakers or any form of pyrotechnics in association with electronic message center signs.
  • Any sign that constitutes a public nuisance as per unauthorized highway sign regulations.
  • Animated signs (e.g., moving, fluttering, rotating), pennants, flags, balloons, streamers, inflatable devices, or propellers, unless otherwise allowed in district-specific tables.

Exempt Signs in Seymour

  • Any public notice or warning required by valid and applicable federal, state, or local law or regulation.
  • Any sign inside a building, not attached to a window or door, within the lot line and not designed or intended to be read from a public right-of-way.
  • Works of art that do not include a commercial message.
  • Holiday lights and decorations with no commercial message, and only between November 15 and January 15.
  • Traffic control devices on private property that meet Indiana Department of Transportation standards and do not contain any commercial message.
  • Directional or informational signs of a public or quasi-public nature, not exceeding 8 square feet in area, and containing no commercial message, used for indicating the name/location of places (like towns, hospitals, schools, community centers, civic bodies, or religious facilities) or special events (like fairs, festivals, or concerts).
  • Real estate signs no larger than six square feet.
  • Political signs.

Sign Plan & Submission Notes for Seymour

  • Each sign placed, constructed, erected, or modified on a zone lot requires a permit, unless specifically exempted by the ordinance.
  • The form and content of sign permit applications must conform to the Plan Commission Rules of Procedure.
  • Installing, creating, erecting, maintaining, or altering a sign in a way inconsistent with any plan or permit is prohibited.
  • There is no explicit mention in this text of a Master Sign Plan or a required variance meeting for sign approval, but adherence to any governing plan or permit is required.