Questions? Call us at (262) 218-2915

Sign Regulations in Ascension Parish, Louisiana

Ascension Parish, Louisiana has specific sign regulations covering 19 sign types across 10 zoning districts. Regulated sign types include All Signs, Freestanding Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Ascension Parish, Louisiana

Sample Sign Requirements in Ascension Parish

Sign TypeMax HeightMax AreaSetback
Freestanding Sign20 feet; 30 feet along Airline Highway (U.S. 61); 60 feet above grade or 35 ft above elevated roadway within 500 ft of I-10Determined by formula; minimum 50 sq ftMinimum 5 ft from right-of-way, minimum 20 ft from edge of pavement/roadway surface.
Wall SignShall not extend above the top of the building facadeDetermined by formula; minimum 50 sq ftNot listed
Home Occupation SignNot listed2 sq ft visible from one directionNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Ascension ParishFull Coverage

Sign Types Covered

19

  • All Signs
  • Freestanding Sign
  • Wall Sign
  • Home Occupation Sign
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Ascension Parish

Frequently Asked Questions

In Ascension Parish, the height limit for Monument Sign in the Neighborhood business overlay zone is 4 feet (Sec. 17-2035(H)-(J)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Ascension Parish require a permit. From the submission notes on this page: All uses subject to site plan review in the light industrial district (LI) must submit a site plan including location and size of signs. Run a code check for an exact address to see the permit requirements for that zone.

Ascension Parish's sign code covers 19 sign types, including All Signs, Freestanding Sign, Wall Sign, and Home Occupation Sign. Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Signs that are exempted under section 17-2043(J) are not required to obtain a sign permit. The full list is on this page.

This page doesn't list a single setback distance for signs in Ascension Parish. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Ascension Parish's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Ascension Parish Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Ascension Parish, Louisiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Ascension Parish, Louisiana Sign Rules at a Glance

Ascension Parish, Louisiana regulates 19 sign types across 10 zoning districts. Subdivision Entry Signs in the Mixed use corridors (MU) and other zoning districts are capped at 10 feet tall and 200 sq ft (Sec. 17-2086(6)(d)(iii)). Most commercial signs in Ascension Parish require a permit.

Detailed Sign Ordinance Requirements for Ascension Parish, Louisiana

Sign Rules by Zoning District in Ascension Parish (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Mixed use corridors (MU), Mixed use 2 corridors (MU2), Heavy industrial (HI), Mobile home park / RV park (MHRV), Crossroad commercial (CC), Medium intensity residential (RM), Medium industrial (MI), Light industrial (LI), Airport district (A), Rural (R), Conservation (C), Conservation 5 (C5)520 feet; 30 feet along Airline Highway (U.S. 61); 60 feet above grade or 35 ft above elevated roadway within 500 ft of I-10200 sq ftNot listed
Scenic rural highways overlay zone2Not listedNot listedNot listed
Neighborhood business overlay zone24 feet20 sq ft of copy areaNot listed
Flood hazard overlay zone2Not listedNot listedNot listed
Designation of waste sites (overlay zone)2Not listedNot listedNot listed
Historic site overlay zone2Not listedNot listedNot listed
Chemical emergency overlay zone2Not listedNot listedNot listed
Airport overlay zone2No structure (including signs) may exceed the applicable height limits set forth in 17-2036(D) for the relevant airport zone.Not listedNot listed
Industrial designation overlay zone, West Bank Industrial Overlay2Not listedNot listedNot listed
General Regulations For All Zones240 ft on MU2 for relocation; elsewhere per underlying district standards380 sq ft per face on MU2 (in relocation), otherwise as permitted for MI, HI, MU, CC zonesNot listed

Zone-by-Zone Sign Requirements in Ascension Parish(sample of 3 of 10 zones)

Mixed use corridors (MU), Mixed use 2 corridors (MU2), Heavy industrial (HI), Mobile home park / RV park (MHRV), Crossroad commercial (CC), Medium intensity residential (RM), Medium industrial (MI), Light industrial (LI), Airport district (A), Rural (R), Conservation (C), Conservation 5 (C5)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign20 feet; 30 feet along Airline Highway (U.S. 61); 60 feet above grade or 35 ft above elevated roadway within 500 ft of I-10Determined by formula; minimum 50 sq ftNot listedMinimum 5 ft from right-of-way, minimum 20 ft from edge of pavement/roadway surface.One per parcel; parcels with more than one street frontage permitted one per frontage.No part within 5 feet of the right-of-way or within 20 feet of edge of pavement/roadway. No part projects over right-of-way.Not listedUnlock17-2086(6)(b)-(c), 17-2086(6)(d)
Wall SignShall not extend above the top of the building facadeDetermined by formula; minimum 50 sq ftNot listedNot listedNot listedMounted on or integrated into the facade of a buildingNot listedUnlock17-2086(6)(b)-(d)
Home Occupation SignNot listed2 sq ft visible from one directionNot listedNot listedOneFreestanding on premises of home occupationNot listedUnlock17-2086(6)(d)(ii)
Subdivision Entry Sign10 feet200 sq ftNot listedNot listedOne per entryFreestanding at entry to subdivisionNot listedUnlock17-2086(6)(d)(iii)
Portable SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17-2086(6)(e)

Neighborhood business overlay zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Monument Sign4 feet20 sq ft of copy areaNot listedNot listedNot listedOn ground, within permitted area, not in R-O-W or obstructing visibilityNot listedUnlock17-2035(H)-(J)
Monument Sign (Freestanding)4 ft20 sq ft of copy areaNot listedWithin property, not in R-O-W and not within 25 ft of the centerline of road (see fencing rules; applies by reference to monument signs placement)Not specified, but only monument type allowed as freestanding.Within required setback from centerline of road; not in R-O-WNot listedUnlock17-2035 (H)-(J)

Airport overlay zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
All Signs (Height Limitation)No structure (including signs) may exceed the applicable height limits set forth in 17-2036(D) for the relevant airport zone.Not listedNot listedNot listedNot listedWithin airport zone; see map and approach, transitional, conical, and horizontal surface requirements.Not listedUnlock17-2036(D), 17-2036(H)
All Signs (Height limitations)Dependent on subzone: within approach, transitional, horizontal, and conical zones, see 17-2036(D) for detailed height slope chart. Typical: max height 20-50 ft (approach) to 150 ft (horizontal), 350 ft (conical) above airport elevation; BUT no structure (including any sign) may exceed height allowed for specific zone.Not listedNot listedNot listedNot listedWithin airport overlay – land beneath defined airport surfaces (zones)Not listedUnlock17-2036(D), 17-2036(H)-(J)

PermitPal covers all 10 zoning districts in Ascension Parish. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Ascension Parish

  • No on-site commercial sign shall be developed, installed, located or constructed on the site of a commercial, residential, recreational, institutional, or industrial use except as authorized in the sign ordinance.
  • No portion of any sign shall be located or installed in a manner that creates a traffic hazard.
  • No portion of any sign or sign structure shall be located within five feet from the right-of-way line or within 20 feet of the edge of pavement or roadway surface of any public street or highway; no portion of any sign shall project or extend into or over any public right-of-way.
  • No sign or structure shall exceed prescribed maximum heights (20 feet for freestanding signs, 30 feet along Airline Highway, 60 feet within 500 feet of Interstate Highway 10, or 35 feet above the height of an elevated roadway).
  • Not more than one freestanding sign structure shall be located on any parcel of land except for parcels with more than one street frontage.
  • The use of any portion of a telecommunication tower for signs or advertising purposes, including company name, banners, streamers, etc., is strictly prohibited, except as required by any federal agency.
  • Portable signs may not be allowed for more than 30 calendar days in any six-month period and are not allowed in the conservation district (C).
  • Signs mounted on or integrated into the facade of a building shall not extend above the top of the building facade; signs erected on a roof are not permitted.
  • Obsolete signs (signs advertising a business or event no longer in existence) must be removed within 30 days; failure to remove may result in removal by the parish at owner's expense.
  • Upon change in ownership of a business, all signs shall be brought into compliance with the ordinance.
  • No sign or advertising is permitted at wireless communication facility sites or on any ancillary structure or equipment enclosure, except as required by law.
  • No antenna or wireless communications facility shall block, restrict, or unreasonably interfere with, impede access to, or impede use of, any public way or adjacent infrastructure.
  • No antenna or wireless communications facility shall create a material visual obstruction to vehicular and pedestrian traffic or obstruct sight triangles.
  • No antenna or wireless communications facility shall create, contribute to, or exacerbate a violation of the Americans with Disabilities Act or related standards.
  • Billboard sign structures must be spaced at least 2,000 feet apart and there shall be no stacked billboards (signs placed directly above one another facing the same direction).
  • All signs and fencing must be maintained and repaired in a reasonable fashion and remain free from visual blight, including chipping, peeling, rusting, defective lighting, or warped materials.
  • No signage or fencing shall be located so as to restrict or obstruct traffic visibility or allowed within the right-of-way of a dedicated public street, unless specifically approved.
  • No identification signage will be allowed within the right-of-way or in unapproved areas; portable signage will not be approved.

Exempt Signs in Ascension Parish

  • Signs that are exempted under section 17-2043(J) are not required to obtain a sign permit.
  • Single-family homes used as a principal residence: A building permit constitutes a development permit and does not require a separate development permit.
  • Small projects: For a development project on a single lot of record with a total construction value of less than $20,000.00, a building permit constitutes a development permit (limited to one exemption per lot every three years).
  • Existing nonconforming signs in use as of the date of ordinance enactment may continue, subject to the nonconforming use provisions, but may not be expanded or altered except as provided.
  • No WCF (Wireless Communication Facility) permit is required to perform maintenance on, replace, or repair a WCF or associated pole/support structure provided such maintenance, replacement, or repair does not materially change the loading, increase RF emissions, constitute a substantial change, or exceed permit conditions.
  • A wireless provider or franchised cable operator may install micro wireless facilities by suspending from authorized communications cables on utility poles without a permit, if advance notice is provided and all standards are met.

Sign Plan & Submission Notes for Ascension Parish

  • A site plan is required as a precondition to the issuance of a development permit for: 1) any land use taking direct access to a state road; 2) development of any single land use consisting of ten or more acres; 3) development of any commercial, industrial, recreational, or institutional use; 4) development of any residential land use with more than two units.
  • Site plans must show the location and size of signs as one of the required items.
  • All uses subject to site plan review in the light industrial district (LI) must submit a site plan including location and size of signs.
  • All applications for sign permits must include site drawings showing the size and location of the proposed sign and the location of all buildings, existing signs, and boundary lines.
  • A 'pre-development meeting' is required before the Planning Commission for any development proposal within a historic site overlay zone; a site plan showing all intended features including signage must be submitted for review and approval.
  • Any telecommunication tower application must submit a site development plan including the location and configuration of all accessory buildings, equipment cabinets, fencing, proposed landscaping, and statement of engineer; location and size of all signs must also be included.
  • A copy of the development permit for the use to which the sign is related (and the application for that zoning certificate) must accompany any sign permit application for that use.
  • For new Wireless Communications Facilities, the applicant must submit a construction plan, elevation drawings, and other design documents which include sign location, if applicable.
  • In the Neighborhood Business Overlay Zone, all uses subject to site plan review shall comply with LI (light industrial) standards, which include the location and size of all signs.
  • Site plans are reviewed by the Zoning Official for compliance with the sign regulations as part of the overall review process before issuing a development permit.

Source: municode municipal code