Sign Regulations in Baton Rouge, Louisiana
Baton Rouge, Louisiana has specific sign regulations covering 75 sign types across 21 zoning districts. Regulated sign types include Billboard, Pylon Sign, Roof Sign (On Roof, No Projection Above Roofline). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: January 27, 2026
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Baton Rouge, Louisiana
Sample Sign Requirements in Baton Rouge
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Directional Sign | 8 ft | 6 sq ft per sign | Not listed |
| Awning Sign | Not listed | 50% of awning face | Not closer than 2 ft (horizontal) from curb line |
| Canopy Sign | 2 ft sign height (unless larger approved by Development Director) | 50% of canopy face | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
75
- Billboard
- Pylon Sign
- Roof Sign (On Roof, No Projection Above Roofline)
- Pylon Sign (0–200 ft Frontage)
- +2 more types
Zoning Districts
21
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Baton Rouge
Baton Rouge, Louisiana Sign Rules at a Glance
Baton Rouge, Louisiana regulates 75 sign types across 21 zoning districts. Suspended Signs (Multifamily or Nonresidential Use in Residential District) in certain zoning districts are capped at 3 sq ft, set back at least 2 ft from curb (Sec. 16.5.9.B). Most commercial signs in Baton Rouge require a permit.
Detailed Sign Ordinance Requirements for Baton Rouge, Louisiana
Sign Rules by Zoning District in Baton Rouge (21 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area |
|---|---|---|---|
| General Regulations For All Zones | 10 | 8 ft | 200 sq ft (message area) |
| Residential Districts (RE/A3, RE/A1, A1, A2, A2.7, A2.1, A2.9, A2.6, A2.5, A3.1, A3.2, A3.3, A4, A5) | 14 | Message area ≤8 ft; clearance ≥7 ft 6 in | 200 sq ft (message area) |
| Rural District (R) | 7 | Clearance ≥7 ft 6 in; other height limits per each type | Awning: 50% of awning; Canopy: 50% of canopy face (2 ft sign height max unless approved); Marquee: 200 sq ft max (message area), ≤8 ft message height; Projecting: 48 sq ft; Suspended: 3 sq ft |
| Neighborhood Districts (NO, NC, NC-AB) | 7 | Clearance ≥7 ft 6 in; marquee message area ≤8 ft | ≤80% of sign area |
| Office Districts (GOL, GOH) | 8 | 10 ft, or 20 ft if set back at least 20 ft from any road right-of-way or servitude of passage | Up to 150 sq ft (and ≤1 sq ft per linear ft of building frontage) |
| Commercial Districts (LC1, LC2, LC3, HC1, HC2, C5) | 12 | Up to 50 ft (exemption) | 200 sq ft |
| Warehousing Districts (CW1, CW3) | 9 | 40 ft | 200 sq ft |
| Industrial Districts (M1, M2) | 10 | Max 50 ft including embellishments; minimum 10 ft from grade to bottom (including embellishments) | 200 sq ft |
| Downtown Character Area | 6 | Clearance ≥7 ft 6 in; marquee message height ≤8 ft | Awning ≤50%; Canopy ≤50% (2 ft sign height max unless approved); Marquee 200 sq ft; Suspended 3 sq ft |
| Urban/Walkable Character Areas | 2 | Clearance ≥7 ft 6 in; marquee message height ≤8 ft | Awning ≤50%; Canopy ≤50% (2 ft sign height max unless approved); Marquee 200 sq ft; Suspended 3 sq ft; Projecting 48 sq ft |
| Central Business District | 4 | 4 ft | Up to 600 sq ft or 15% of largest wall area (whichever is smaller) |
| Regional Centers | 2 | 35 ft (≤500 ft frontage); 40 ft (501+ ft); up to 50 ft with highway proximity exemption | Up to 600 sq ft or 15% of largest wall area (whichever is smaller) |
| Employment Centers | 2 | 35 ft (≤500 ft frontage); 40 ft (501+ ft); up to 50 ft with highway proximity exemption | Up to 600 sq ft or 15% of largest wall area (whichever is smaller) |
| Florida Boulevard Overlay | 1 | Per general billboard standards | Per general billboard standards |
| Government Street Overlay | 1 | Not listed | Not listed |
| Old Hammond Highway Overlay | 1 | Not listed | Not listed |
| Nicholson Drive Overlay (West McKinley Street and Garner Street) | 1 | Not listed | Not listed |
| Nicholson Drive Overlay (West Chimes to West McKinley) | 1 | Per general billboard standards | Per general billboard standards |
| Bluebonnet Boulevard Overlay | 1 | Not listed | Not listed |
| Regional Centers - General (applies also within Commercial/Industrial base districts located in designated centers) | 1 | As above (including clearances) | As above |
| Employment Centers - General (applies also within Commercial/Industrial base districts located in designated centers) | 1 | As above (including clearances) | As above |
Zone-by-Zone Sign Requirements in Baton Rouge(sample of 3 of 21 zones)
Residential Districts (RE/A3, RE/A1, A1, A2, A2.7, A2.1, A2.9, A2.6, A2.5, A3.1, A3.2, A3.3, A4, A5)
| Sign Type | Max Height | Max Area | Setback | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|
| Monument Sign (Multifamily Uses in Residential Districts) | 6 ft | 32 sq ft | Not listed | One freestanding sign per street frontage | Freestanding monument sign on private property | Unlock | Section 16.5.5.B.1-2; Table 16.B (Multifamily uses in residential districts) |
| Monument Sign (Nonresidential Uses in Residential Districts) | 6 ft | 24 sq ft | Not listed | One per street frontage | Freestanding monument sign on private property | Unlock | Section 16.5.5.B.1-2; Table 16.B (Nonresidential uses in residential districts) |
| Awning Sign (Multifamily Use or Nonresidential Use in Residential District) | Not listed | 50% of awning face | ≥2 ft from curb | One per door/window | On awning; may extend into ROW up to 5 ft with license; ≥2 ft from curb | Unlock | Section 16.5.2.B; Section 16.4.1.A |
| Canopy Sign (Multifamily Use or Nonresidential Use in Residential District) | 2 ft (unless approved larger) | 50% of canopy face | Not listed | Not listed | On canopy; may be in ROW with license | Unlock | Section 16.5.3.B.1-4; Section 16.4.1.A |
| Marquee Sign (Multifamily Use in Residential Districts) | Message area ≤8 ft; clearance ≥7 ft 6 in | 200 sq ft (message area) | ≥2 ft from curb | One per establishment | On marquee; ≥2 ft from curb; may be in ROW with license | Unlock | Section 16.5.6.B |
| Projecting Sign (Multifamily or Nonresidential Use in Residential District) | Not listed | 48 sq ft | ≤6 ft into front yard; ≤4 ft 6 in into ROW unless licensed | One per establishment | Attached to building; may extend ≤6 ft into required front yard or ≤4 ft 6 in into ROW (license needed beyond) | Unlock | Section 16.5.7.B |
| Suspended Sign (Multifamily or Nonresidential Use in Residential District) | Not listed | 3 sq ft | ≥2 ft from curb | One per establishment or per exterior wall | Suspended under horizontal plane; ≥2 ft from curb; may be in ROW with license | Unlock | Section 16.5.9.B |
| Temporary Sign (Residential Use in Residential Districts) | Not listed | 6 sq ft per sign | Not listed | Maximum two per lot | On private property | Unlock | Section 16.5.11.B.1-5; Table 16.F (Residential uses in residential districts) |
Commercial Districts (LC1, LC2, LC3, HC1, HC2, C5)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|
| Monument Sign (Commercial Districts) | 10 ft, or 20 ft if set back at least 20 ft from any road right-of-way or servitude of passage | 64 sq ft | Not listed | 20 ft setback from ROW required to use 20 ft height | One per street frontage | Freestanding monument sign | Unlock | Section 16.5.5.B.2; Table 16.B (All other districts) |
| Pylon Sign (0–200 ft Frontage) | 35 ft | 100 sq ft | Not listed | If sign area ≤32 sq ft: ≥5 ft from all property lines; ≥12 ft from abutting residentially zoned properties. If sign area >32 sq ft: ≥10 ft from all property lines; ≥20 ft from abutting residentially zoned properties | One per street frontage (unless expressly permitted otherwise) | Freestanding pylon sign | Unlock | Section 16.5.5.C.2; Table 16.D (Frontage 0–200 ft) |
| Pylon Sign (201–500 ft Frontage) | 35 ft | 150 sq ft | Not listed | If sign area ≤32 sq ft: ≥5 ft from property lines (≥12 ft from abutting residential zones); If >32 sq ft: ≥10 ft (≥20 ft from abutting residential zones) | One per street frontage | Freestanding pylon sign | Unlock | Section 16.5.5.C.2; Table 16.D (Frontage 201–500 ft) |
| Pylon Sign (501+ ft Frontage) | 40 ft | 200 sq ft | Not listed | If sign area ≤32 sq ft: ≥5 ft from property lines (≥12 ft from abutting residential zones); If >32 sq ft: ≥10 ft (≥20 ft from abutting residential zones) | One per street frontage | Freestanding pylon sign | Unlock | Section 16.5.5.C.2; Table 16.D (Frontage 501+ ft) |
| Pylon Sign (Height Exemption - Highway Proximity) | Up to 50 ft (exemption) | Per applicable frontage category | Not listed | Setbacks per sign area thresholds still apply | One per street frontage | On property within 400 ft of the ROW of a controlled access highway; adjacent to or within 150 ft of an interchange providing access; and ≥200 ft from a residential district | Unlock | Section 16.5.5.C.2.c(1)-(3) |
| Roof Sign (On Roof, No Projection Above Roofline) | Not listed | Up to 150 sq ft (and ≤1 sq ft per linear ft of building frontage) | Not listed | ≥2 ft from roof edge (horizontal) | One per establishment | On roof (not projecting above roofline) | Unlock | Section 16.5.8 (second occurrence) B.1-6 |
| Awning/Canopy/Marquee/Projecting/Suspended Signs (Commercial Districts) | Clearance ≥7 ft 6 in; marquee message height ≤8 ft | Awning: ≤50% of awning; Canopy: ≤50% of canopy face (2 ft sign height max unless approved); Marquee: 200 sq ft max; Projecting: 48 sq ft; Suspended: 3 sq ft | Not listed | Awning/Marquee/Suspended ≥2 ft from curb; Projecting extension limits as specified | Per-type limits apply | On building/awning/canopy/marquee; ROW placement subject to license | Unlock | Sections 16.5.2.B; 16.5.3.B; 16.5.6.B; 16.5.7.B; 16.5.9.B; Section 16.4.1.A |
| Billboard | Max 50 ft including embellishments; minimum 10 ft from grade to bottom (including embellishments) | Surface area per face: min 72 sq ft; max 672 sq ft (excluding embellishments) | Max face length per side: 52 ft; max face height per side: 25 ft (including embellishments) | Per Table 16.G; ≥10 ft from ROW; yard requirements of zoning district; utility clearances per codes | Max two faces per billboard structure; structure spacing per standards | Permitted only along thoroughfares, interstates, or arterials designated as a major street on the Major Street Plan; not within listed prohibited areas/roads/waterways/overlays (see additional requirements) | Unlock | Sections 16.7.2.A-M; 16.7.3.A-B; 16.7.4; 16.7.5 |
Industrial Districts (M1, M2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|
| Wall Sign (Industrial Districts) | Not listed | 30% of wall area; minimum 32 sq ft | Not listed | Not listed | Not listed | On building wall/window/door/parapet/lower roof slopes | Unlock | Section 16.5.10.B.1; Table 16.E (All other districts) |
| Monument Sign (Industrial Districts) | 10 ft, or 20 ft if set back ≥20 ft from any road ROW/servitude of passage | 64 sq ft | Not listed | ≥20 ft from ROW to use 20 ft height | One per street frontage | Freestanding monument sign | Unlock | Section 16.5.5.B.2; Table 16.B (All other districts) |
| Pylon Sign (0–200 ft Frontage) | 35 ft | 100 sq ft | Not listed | If area ≤32 sq ft: ≥5 ft property lines (≥12 ft from abutting residential); If >32 sq ft: ≥10 ft property lines (≥20 ft from abutting residential) | One per street frontage | Freestanding pylon sign | Unlock | Section 16.5.5.C.2; Table 16.D |
| Pylon Sign (201–500 ft Frontage) | 35 ft | 150 sq ft | Not listed | If area ≤32 sq ft: ≥5 ft property lines (≥12 ft from abutting residential); If >32 sq ft: ≥10 ft property lines (≥20 ft from abutting residential) | One per street frontage | Freestanding pylon sign | Unlock | Section 16.5.5.C.2; Table 16.D |
| Pylon Sign (501+ ft Frontage) | 40 ft | 200 sq ft | Not listed | If area ≤32 sq ft: ≥5 ft property lines (≥12 ft from abutting residential); If >32 sq ft: ≥10 ft property lines (≥20 ft from abutting residential) | One per street frontage | Freestanding pylon sign | Unlock | Section 16.5.5.C.2; Table 16.D; Section 16.5.5.C.2.c |
| Roof Sign (On Roof, No Projection Above Roofline) | Not listed | Up to 150 sq ft | Not listed | ≥2 ft from roof edge | One per establishment | On roof (not projecting above roofline) | Unlock | Section 16.5.8 (second occurrence) B.1-6 |
| Awning/Canopy/Marquee/Projecting/Suspended Signs (Industrial Districts) | Clearance ≥7 ft 6 in; marquee message height ≤8 ft | Awning ≤50%; Canopy ≤50% (2 ft sign height max unless approved); Marquee 200 sq ft; Projecting 48 sq ft; Suspended 3 sq ft | Not listed | Awning/Marquee/Suspended ≥2 ft from curb; Projecting extension limits as specified | Per-type limits apply | On building; ROW placement subject to license | Unlock | Sections 16.5.2.B; 16.5.3.B; 16.5.6.B; 16.5.7.B; 16.5.9.B; Section 16.4.1.A |
| Billboard | Max 50 ft including embellishments; minimum 10 ft from grade to bottom (including embellishments) | Surface area per face: min 72 sq ft; max 672 sq ft | Max face length per side: 52 ft; max face height per side: 25 ft | Per Table 16.G; ≥10 ft from ROW; zoning yard requirements; utility clearances | Max two faces per structure; spacing per standards | Permitted along thoroughfares, interstates, or arterials designated as major streets; not within prohibited areas/overlays/roads/waterways | Unlock | Sections 16.7.2; 16.7.3; 16.7.4; 16.7.5 |
PermitPal covers all 21 zoning districts in Baton Rouge. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Baton Rouge
- It is unlawful to display, erect, place, establish, paint, or maintain a sign except in conformance with this chapter.
- Signs shall not be illuminated by moving lights, flickering lights, or strings of lights placed around the sign, unless otherwise permitted within the ordinance.
- Signs shall not be located so as to block sight distance triangles, windows, doors, or other means of ingress and egress.
- Rotating or revolving signs with rotating or moving parts exceeding seven revolutions per minute are prohibited.
- Fluttering, spinning, windblown, or inflated devices (including balloons, feather flags, pennants, and propeller discs) are prohibited unless allowed as a temporary sign under Section 16.5.11.
- Portable signs not permanently attached to the ground or a permanent structure (including signs with or without wheels, converted A- or T-frame signs, and A-frame sandwich boards) are prohibited, except as allowed for moveable sidewalk signs under Section 16.4.2.
- Obsolete sign structures not allowed under this chapter are prohibited unless associated with a legal nonconforming sign.
- Dilapidated or damaged signs (including missing or broken panels, damaged supports or frames, inadequate maintenance, dilapidation, obsolescence, or abandonment) are prohibited.
- Signs that constitute a traffic hazard, including those located within sight distance triangles, are prohibited.
- Signs located in the public right-of-way or attached/affixed/painted on utility poles, light standards, utility boxes or pedestals, trees, rocks, or other natural objects on public property are prohibited, except as expressly allowed in Section 16.4 or as expressly permitted by the Development Director.
- All signs not expressly permitted under this chapter are prohibited.
Exempt Signs in Baton Rouge
- Public signs erected by or on behalf of a governmental entity are allowed within the public right-of-way in all zoning districts, subject to applicable requirements.
- Emergency warning signs erected by a government agency, utility company, or a contractor doing work in a public right-of-way are allowed within the public right-of-way in all zoning districts.
- Awning, marquee, projecting, and suspended signs may be allowed within the public right-of-way in all zoning districts (per Section 16.4.1 and subject to requirements; permanent signs require a license agreement).
- Signs erected pursuant to a temporary use permit issued by the Development Director may be allowed within the public right-of-way in all zoning districts.
- Painting on a wall is not considered a sign.
- Lawful nonconforming signs may be maintained as nonconforming signs; nonconforming sign structures may remain so long as a sign is maintained in good condition (with removal required if the property is vacant longer than 24 months).
- For temporary signs: if the owner consents and the property is being offered for sale or lease, one sign is allowed per street frontage from the start of the listing until 15 days after the act of sale or lease, regardless of district.
- Signs containing noncommercial speech are permitted anywhere that advertising or business signs are permitted, subject to the same regulations.
Sign Plan & Submission Notes for Baton Rouge
- A sign permit is required to erect, substantially modify, or relocate any sign; applications must be submitted to the Building Official with required information.
- Sign companies must be licensed; it is unlawful to erect, substantially modify, or relocate specified signs without the appropriate license.
- Electrical plans from a licensed electrician are required for any new electronic message center (EMC) or illuminated sign.
- Permanent signs within the public right-of-way require a license agreement approved by the Development Director.
- Signs may be erected in the public right-of-way pursuant to a temporary use permit issued by the Development Director.
- Roof signs in the Central Business District and in Regional Centers and Employment Centers require a conditional use permit.
- The Development Director may approve canopy signs with heights greater than two feet.
- Non-residential subdivision entry signs must be for a unified development, demonstrated through an approved recorded nonresidential subdivision, a development plan, or approved site plan(s).
- Billboards require a permit from the Development Director and an engineering drawing; each must comply with applicable building and electrical codes.
Source: other municipal code
Other Cities in Louisiana
Frequently Asked Questions
In Baton Rouge, the height limit for Pylon Sign (501+ ft Frontage) in the Commercial Districts (LC1, LC2, LC3, HC1, HC2, C5) is 40 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Baton Rouge require a permit. From the submission notes on this page: A sign permit is required to erect, substantially modify, or relocate any sign; applications must be submitted to the Building Official with required information. Run a code check for an exact address to see the permit requirements for that zone.
Baton Rouge's sign code covers 75 sign types, including Billboard, Pylon Sign, Roof Sign (On Roof, No Projection Above Roofline), and Pylon Sign (0–200 ft Frontage). Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Signs erected pursuant to a temporary use permit issued by the Development Director may be allowed within the public right-of-way in all zoning districts. The full list is on this page.
In Baton Rouge, Monument Sign (Industrial Districts) in the Industrial Districts (M1, M2) must be set back at least 20 ft from right-of-way to use 20 ft height. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Baton Rouge's sign ordinance that cover digital, changing, or flashing signs: Electrical plans from a licensed electrician are required for any new electronic message center (EMC) or illuminated sign. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Baton Rouge Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Baton Rouge, Louisiana, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds