Sign Regulations in Brunswick, Maryland
Brunswick, Maryland has specific sign regulations covering 14 sign types across 3 zoning districts. Regulated sign types include Projecting Sign, Flat Sign, Real Estate Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Brunswick, Maryland
Sample Sign Requirements in Brunswick
| Sign Type | Max Height | Max Area |
|---|---|---|
| Projecting Sign | Not listed | 9 sq ft (1,296 sq in) |
| Flat Sign | Not listed | 9 sq ft (1,296 sq in) |
| Real Estate Sign | 4 ft | 6 sq ft |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
14
- Projecting Sign
- Flat Sign
- Real Estate Sign
- Subdivision Sign (Until all properties sold)
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Brunswick
Brunswick, Maryland Sign Rules at a Glance
Brunswick, Maryland regulates 14 sign types across 3 zoning districts. Temporary Signs are capped at 4 ft tall and 6 sq ft. Most commercial signs in Brunswick require a permit.
Detailed Sign Ordinance Requirements for Brunswick, Maryland
Sign Rules by Zoning District in Brunswick (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area |
|---|---|---|---|
| Brunswick Main Street boundary | 2 | Not listed | 9 sq ft (1,296 sq in) |
| Historical District | 2 | Not listed | 9 sq ft (1,296 sq in) |
| General Regulations For All Zones | 12 | 25 ft (attached only) | 75 sq ft |
Zone-by-Zone Sign Requirements in Brunswick
Brunswick Main Street boundary
| Sign Type | Max Area | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|
| Projecting Sign | 9 sq ft (1,296 sq in) | Must be installed so the top of the sign is in line with the bottom of the second story window on multi-story buildings. | Unlock | Section 3-5107(B)(1)-(4), (C) |
| Flat Sign | 9 sq ft (1,296 sq in) | Not above the bottom of the second floor window; must not cover any part of any window. | Unlock | Section 3-5107(B)(1)-(5), (C) |
Historical District
| Sign Type | Max Area | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|
| Projecting Sign | 9 sq ft (1,296 sq in) | On multi-story buildings, the top must be in line with bottom of second story window. | Unlock | Section 3-5107 (applies to Main Street boundary which is within or overlaps the Historical District) |
| Flat Sign | 9 sq ft (1,296 sq in) | Below the bottom of the second floor window. | Unlock | Section 3-5107 (Main Street boundary, within or overlaps the Historical District) |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|
| Real Estate Sign | 4 ft | 6 sq ft | Not listed | Not listed | Unlock | Section 3-5105, Table |
| Subdivision Sign (Until all properties sold) | 8 ft | 75 sq ft | Not listed | Not listed | Unlock | Section 3-5105, Table |
| Subdivision Identification Sign | 8 ft | 20 sq ft | Not listed | Not listed | Unlock | Section 3-5105, Table |
| Contractor Sign (Until project complete) | 8 ft | 24 sq ft | Not listed | Not listed | Unlock | Section 3-5105, Table |
| Identification Sign for Public or Non-profit Organization | 8 ft | 10 sq ft | Not listed | Not listed | Unlock | Section 3-5105, Table |
| Home Occupation Sign | 4 ft | 2 sq ft | Not listed | Not listed | Unlock | Section 3-5105, Table |
| Industrial Park Park Identification Sign | 8 ft | 50 sq ft | Not listed | Entrance | Unlock | Section 3-5105, Table |
| Temporary Sign | 4 ft | 6 sq ft | 4 in public right-of-way | Not listed | Unlock | Section 3-5105, Table; Section 3-5109 |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Brunswick with a free PermitPal account.
Run a free code checkProhibited Signs in Brunswick
- No sign shall be erected in the public right-of-way in any district unless in compliance with this Article 5.
- Existing signs shall not be altered or moved unless in compliance with this Article 5.
- No signs shall be attached to utility poles, traffic signal poles, or traffic control posts/signs.
- Signs, flags or banners attached to a building shall not project more than 36 inches from the face of the building and shall have a minimum clearance of eight feet above the ground/sidewalk.
- All signs shall be maintained in good structural condition and shall comply with all applicable provisions of the Frederick County Building Code.
- Signs may not be located within the public right-of-way without a license agreement acceptable to the Mayor and Council.
- No signs shall be located on any part of the roof structure.
- The following types of signs are prohibited in all districts: Billboards, Variable message signs (except city informational signs), Portable trailer signs (except city informational signs), Marquee signs, Animated signs, Signs located anywhere other than on the property or structure to which it directs attention or is appurtenant, Signs outlining buildings with neon or other lights, Signs attached to trees, fences, public utility poles, rocks, curbstones, sidewalks, lamp posts, hydrants, bridges, highway markers, or another sign (except as required by law), Illuminated signs which reflect or cast glare on any public roadway or adjacent property, Signs resembling traffic signals or warning devices, Signs with blinking, flashing, or fluttering lights or changing intensity/color, Signs with exposed reflective bulbs, strobe lights or incandescent lamps (over 15 watts) on the exterior surface facing public street or adjacent property, Any sign advertising a business or product no longer conducted or sold on the property.
Exempt Signs in Brunswick
- Signs required by law, placed by a duly authorized governmental agency, or placed not as an advertisement but as a warning against hunting, fishing, or trespassing, or not visible from any highway, are exempt from the prohibition on attachment to trees, fences, public utility poles, rocks, curbstones, sidewalks, lamp posts, hydrants, bridges, highway markers, or other signs.
- Legal nonconforming signs existing prior to the ordinance enactment are allowed to continue, subject to restrictions in Section 3-5110.
Sign Plan & Submission Notes for Brunswick
- A zoning certificate and building permit are required for the erection of new signs or for the alteration of size, height or location of existing signs.
- If site plans are required to be reviewed by the Planning Commission, they shall include the location, height, size, and design of all signs to be located at the site.
- The Planning and Zoning Department may require a scaled sketch plan for zoning certificate applications, showing all pertinent features and proposed location of the sign.
- Signs may not be located within the public right-of-way without a license agreement acceptable to the Mayor and Council.
Source: municode municipal code
Other Cities in Maryland
Frequently Asked Questions
In Brunswick, the height limit for Subdivision Sign (Until all properties sold) is 8 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Brunswick require a permit. From the submission notes on this page: The Planning and Zoning Department may require a scaled sketch plan for zoning certificate applications, showing all pertinent features and proposed location of the sign. Run a code check for an exact address to see the permit requirements for that zone.
Brunswick's sign code covers 14 sign types, including Projecting Sign, Flat Sign, Real Estate Sign, and Subdivision Sign (Until all properties sold). Most commercial signs need a permit. The ordinance lists 2 exemptions. One of them: Legal nonconforming signs existing prior to the ordinance enactment are allowed to continue, subject to restrictions in Section 3-5110. The full list is on this page.
Ready to Research Brunswick Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Brunswick, Maryland, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds