Questions? Call us at (262) 218-2915

Sign Regulations in Bedford Township, Michigan

Bedford Township, Michigan has specific sign regulations covering 43 sign types across 18 zoning districts. Regulated sign types include Wall Sign (Accessory), Entrance/Door Nameplate (Per Unit), Window Signs (Per Unit). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: October 30, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Bedford Township, Michigan

Sample Sign Requirements in Bedford Township

Sign TypeMax HeightMax AreaSetback
Freestanding LED Message Board Sign (Non-Residential Districts)Not listedNot listedFreestanding accessory signs may be in required front yard; no sign in/over/right-of-way or easements; corner visibility triangle limit applies.
Private Directional Sign3 ft (freestanding)2 sq ft (per sign face)Must not obstruct ingress/egress or clear vision.
Temporary Sign - General StandardsNot listed32 sq ftGeneral locational and safety standards of Sec. 400.1922.1 apply (e.g., no obstruction of ingress/egress, corner visibility).

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Bedford TownshipFull Coverage

Sign Types Covered

43

  • Wall Sign (Accessory)
  • Entrance/Door Nameplate (Per Unit)
  • Window Signs (Per Unit)
  • Note
  • +2 more types

Zoning Districts

18

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Bedford Township

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Bedford Township, the height limit for Freestanding Multiple-Unit Identification Sign (Monument) - Parcels ≤ 10 Acres in the C-2 Districts (Multiple Units) is 7 ft sign structure height + 1 ft base (overall ≤8 ft). The height limit for Wall Sign - Per Unit (Non-PBO Districts) in the C-2 Districts (Multiple Units) is 2.5 ft (sign height). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Bedford Township require a permit. From the submission notes on this page: All regulated signs require a sign application approved by the Planning Department for zoning and Section 1922 compliance, and a building permit; the written application must be executed by the sign owner/user (or sign section/insert applicant) and the landowner. Run a code check for an exact address to see the permit requirements for that zone.

Bedford Township's sign code covers 43 sign types, including Wall Sign (Accessory), Entrance/Door Nameplate (Per Unit), Window Signs (Per Unit), and Note. Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: All temporary signs do not require a building permit; the Township Building Code does not apply except as it may apply to temporary signs; and Section 1922.1 paragraphs a, b, c, d, f, l, and w do not apply to temporary signs. The full list is on this page.

This page doesn't list a single setback distance for signs in Bedford Township. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Bedford Township's sign code lists Freestanding LED Message Board Sign (Non-Residential Districts) as a sign type, but this page doesn't quote the code's rules for digital or LED signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Bedford Township Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Bedford Township, Michigan, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Bedford Township, Michigan Sign Rules at a Glance

Bedford Township, Michigan regulates 43 sign types across 18 zoning districts. Temporary Signs are capped at 32 sq ft (Sec. 400.1922.2.a(1)-(5)). Most commercial signs in Bedford Township require a permit.

Detailed Sign Ordinance Requirements for Bedford Township, Michigan

Sign Rules by Zoning District in Bedford Township (18 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones15Regulated by Sec. 400.1922.1.v (no part above roof or supporting structure other than the wall itself)Up to the permanent sign area limit of the district, but not to exceed 50 sq ftNot listed
R Districts (R-1 through MHP)1Not listed2 sq ftNot listed
R Districts (R-1 through RT)5Regulated by Sec. 400.1922.1.v (no roof projection)32 sq ft (sign face)Not listed
RM, RME, MHP Districts5Regulated by Sec. 400.1922.1.v32 sq ftNot listed
AG Districts26 ft overall (includes 1 ft base)32 sq ftNot listed
PBO/PBO-1 Districts2Regulated by Sec. 400.1922.1.v50 sq ft (sign face)Not listed
C-1 Districts; C-3 Districts; I-1 Districts2Regulated by Sec. 400.1922.1.v50 sq ftNot listed
C-2 Districts3Regulated by Sec. 400.1922.1.v50 sq ftNot listed
I-2 and I-3 Districts3Regulated by Sec. 400.1922.1.v50 sq ftNot listed
P-1 Districts2Regulated by Sec. 400.1922.1.v50 sq ft (sign face)Not listed
PBO/PBO-1 Districts (Multiple Units)57 ft sign structure height + 1 ft base (overall ≤8 ft)50 sq ft (sign face) + up to 50 sq ft additional for decorative structureNot listed
C-1 Districts (Multiple Units); C-3 Districts (Multiple Units); I-1 Districts (Multiple Units)47 ft sign structure height + 1 ft base (overall ≤8 ft)50 sq ft (sign face) + up to 50 sq ft additional for decorative structureNot listed
C-2 Districts (Multiple Units)57 ft sign structure height + 1 ft base (overall ≤8 ft)50 sq ft (sign face) + up to 50 sq ft additional for decorative structureNot listed
I-2 and I-3 Districts (Multiple Units)47 ft sign structure height + 1 ft base (overall ≤8 ft)50 sq ft each (sign face) + up to 50 sq ft additional per sign for decorative structureNot listed
C-1 Districts (Multiple Units)1Not listedNot listedNot listed
C-3 Districts (Multiple Units)1Not listedNot listedNot listed
I-1 Districts (Multiple Units)1Not listedNot listedNot listed
Planned Unit Development1Not listedNot listedNot listed

Zone-by-Zone Sign Requirements in Bedford Township(sample of 3 of 18 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Private Directional Sign3 ft (freestanding)2 sq ft (per sign face)Not listedMust not obstruct ingress/egress or clear vision.One per listed functional location (exit/entrance/etc.).At each exit, entrance, change of direction, parking, accessible parking/access, and loading/unloading area for uses requiring a site plan; may also be allowed for other uses if specifically approved by Planning Commission for public health/safety/welfare.Not listedUnlockSec. 400.1922.1.d
Temporary Sign - General StandardsNot listed32 sq ftNot listedGeneral locational and safety standards of Sec. 400.1922.1 apply (e.g., no obstruction of ingress/egress, corner visibility).1 per lot/parcel (unless a specific temporary sign type authorizes more).Allowed in all zoning districts unless otherwise stated in Sec. 400.1922.2; on the lot or parcel where the subject event/use occurs unless a specific subsection allows otherwise.Not listedUnlockSec. 400.1922.2.a(1)-(5)
Temporary Sign - Real Estate (One- or Two-Family Dwelling)4 ft (freestanding)5 sq ftNot listedNot listedNo explicit number cap beyond temporary general rule (1), but consistent with 2.a(1).On the lot/parcel being advertised.Not listedUnlockSec. 400.1922.2.b(1)-(3) (first sentence); 2.a
Temporary Sign - Real Estate (All Other Uses)Per permanent sign height limit of the zoning districtPer permanent sign area limit of the zoning district (but still subject to the 32 sq ft general temporary cap unless superseded by 2.b(3))Not listedNot listedAs per 2.a(1), generally 1 per lot/parcel.On the lot/parcel being advertised.Not listedUnlockSec. 400.1922.2.b(3); 2.a
Temporary Sign - Political (Lot with a Dwelling Unit)Per permanent sign height limit of the zoning district16 sq ft (per sign)Not listedNot listedNo numeric limit; aggregate area cap 80 sq ft per lot/parcel.Not on public lots, not on/attached to utility/light/telephone poles, not on any lot (public or private) used as a polling place.Not listedUnlockSec. 400.1922.2.d(1)-(5)
Temporary Sign - Political (All Other Lots/Parcels)Per permanent sign height limit of the zoning districtPer permanent sign area limit of the zoning districtNot listedNot listedNo numeric limit; aggregate area cap 80 sq ft per lot/parcel.Same locational prohibitions as above (no public lots, poles, polling places).Not listedUnlockSec. 400.1922.2.d(1)-(5)
Temporary Sign Pending Permanent SignUp to the permanent sign height limit of the districtUp to the permanent sign area limit of the district, but not to exceed 50 sq ftNot listedNot listed1 per site while pending.Only on the lot/parcel where the permanent sign will be located.Not listedUnlockSec. 400.1922.2.f(1)-(6)
Wall Sign - Two Street Frontages (All Districts, where wall signs are allowed)Regulated by Sec. 400.1922.1.v (no part above roof or supporting structure other than the wall itself)Each sign may be up to the maximum size allowed for one wall sign in the zoning districtNot listedNot listed2 (one per qualifying frontage).Buildings (other than one- or two-family dwellings) with at least two sides having frontage on and facing a public road/street ROW.Not listedUnlockSec. 400.1922.5 (All Districts) and Sec. 400.1922.1.v

RM, RME, MHP Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign - Rental/Management Office Identification - Option 1Regulated by Sec. 400.1922.1.v6 sq ftNot listedNot listed1 per lot/parcel (for rental/management office)On each lot/parcel serving a rental or management office.Not listedUnlockSec. 400.1922.5 (RM, RME, MHP Districts)
Freestanding Sign - Rental/Management Office Identification - Option 26 ft overall (includes 1 ft base)6 sq ftNot listedMay be in required front yard; no ROW/easement encroachment; corner visibility triangle limit applies.1 per lot/parcel (for rental/management office)On each lot/parcel serving a rental or management office.Not listedUnlockSec. 400.1922.5 (RM, RME, MHP Districts); Sec. 400.1922.1.l, 1.w
Wall Sign - Development Identification (Multiple/Elderly Housing or Mobile Home Park) - Option 1Regulated by Sec. 400.1922.1.v32 sq ftNot listedNot listed1 per lot/parcel (development identification)On each lot/parcel of a multiple housing, elderly housing or mobile home park development.Not listedUnlockSec. 400.1922.5 (RM, RME, MHP Districts)
Freestanding Sign - Development Identification (Multiple/Elderly Housing or Mobile Home Park) - Option 26 ft overall (includes 1 ft base)32 sq ft (sign face)Not listedMay be in required front yard; no ROW/easement encroachment; corner visibility triangle limit applies.1 per lot/parcel (development identification)On each lot/parcel of a multiple housing, elderly housing or mobile home park development.Not listedUnlockSec. 400.1922.5 (RM, RME, MHP Districts); Sec. 400.1922.1.l, 1.w
Freestanding Identification Sign - Decorative Entranceway Structure (Development)Highest point of the identification sign: ≤5 ftSign face: ≤32 sq ft; Decorative structure may exceed 50 sq ftNot listedNot listedCounts as the development’s one identification signEntrance to multiple housing, elderly housing, or mobile home park development.Not listedUnlockSec. 400.1922.5 (RM, RME, MHP Districts) (entranceway structure clause); Sec. 400.1922.1.l

C-2 Districts (Multiple Units)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Multiple-Unit Identification Sign (Monument) - Parcels ≤ 10 Acres7 ft sign structure height + 1 ft base (overall ≤8 ft)50 sq ft (sign face) + up to 50 sq ft additional for decorative structureNot listedMay be in required front yard; no ROW/easement encroachment; corner visibility triangle limit applies.1 per lot/parcel (≤10 acres)On multi-unit parcels up to and including 10 acres.Not listedUnlockSec. 400.1922.6.a; Sec. 400.1922.1.l, 1.w, 1.o, 1.e, 1.f
Freestanding Multiple-Unit Identification Signs (Monument) - Parcels > 10 Acres7 ft sign structure height + 1 ft base (overall ≤8 ft)50 sq ft each (sign face) + up to 50 sq ft additional per sign for decorative structureNot listedMay be in required front yard; no ROW/easement encroachment; corner visibility triangle limit applies.2 per lot/parcel (>10 acres)On multi-unit parcels larger than 10 acres.Not listedUnlockSec. 400.1922.6.a (C-2 >10 acres clause); Sec. 400.1922.1.l, 1.w, 1.o, 1.e, 1.f
Wall Sign - Per Unit (Non-PBO Districts)2.5 ft (sign height)50 sq ft or 80% of unit width, whichever is lessNot listedNot listed1 per unit (2 per unit if two qualifying street-facing sides)Attached to the wall of each unit.Not listedUnlockSec. 400.1922.6.b; Sec. 400.1922.6.f; Sec. 400.1922.1.v
Entrance/Door Nameplate (Per Unit)Not listed2 sq ftNot listedNot listed1 per unit entranceOn/within 2 ft of unit entrance/exit door.Not listedUnlockSec. 400.1922.6.b (last sentence)
Window Signs (Per Unit)Not listed25% of available window spaceNot listedNot listedN/A (area-based)Within/on unit windows.Not listedUnlockSec. 400.1922.6.c

PermitPal covers all 18 zoning districts in Bedford Township. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Bedford Township

  • No sign may be located in, project into, or overhang a public right-of-way, private road, or drive; and no sign may be located in, project into, or overhang any dedicated public easement, detention/retention pond, or drainage ditch (except specific residential development identification signs with required approvals).
  • No sign or portion of a sign may be above 2 feet from the established street grade within the corner-lot clear vision triangle defined by 35 feet along each intersecting right-of-way line.
  • Freestanding signs may not exceed the maximum height and surface area specified by Section 1922; permanent freestanding signs must be monument signs.
  • Freestanding LED message board signs are prohibited in residential zoning districts (unless the site is developed as a permitted non-residential use within a residential district); LED signs must change messages no less than every 5 seconds, dim at dusk (and display a single message when abutting residential), advertise only on-parcel uses, and include a permanent insert identifying the site name and address.
  • No sign shall contain visible moving parts.
  • No sign shall resemble or imitate an official traffic signal or sign, or an authorized private or governmental directional or informational sign.
  • No sign shall contain banners, posters, balloons, pennants, ribbons, streamers, spinners, or sound-creating elements, except where specifically allowed for certain temporary signs.
  • Sign lighting may not interfere with pedestrian or driver vision and may not project onto neighboring property by more than 5 foot-candles at the property line; all sign wiring must be underground.
  • No sign may be located so as to obstruct vehicular or pedestrian ingress/egress or to obstruct clear vision.
  • No sign shall contain glass sheets unless approved by the Building Official and only if they do not create an unreasonable risk of injury.
  • Permanent non-freestanding signs are limited to wall signs; roof signs and other non-freestanding signs (other than wall signs) are prohibited.
  • In all districts, no wall sign may project beyond or overhang the wall or any permanent architectural feature.
  • No large inflatables and no spotlights projected into the sky, except when allowed as community event or special event commercial signs.

Exempt Signs in Bedford Township

  • Governmental directional signs and governmental/community informational signs constructed by a governmental entity and placed in the public right-of-way (with road agency approval) are permitted in all districts without a building permit or Township approval and are not regulated by other provisions of Section 1922.
  • Private directional signs for uses requiring a site plan (and for other uses specifically approved by the Planning Commission) are permitted without a building permit or Township approval and are not regulated by other provisions of Section 1922, subject to size and content limits.
  • All temporary signs do not require a building permit; the Township Building Code does not apply except as it may apply to temporary signs; and Section 1922.1 paragraphs a, b, c, d, f, l, and w do not apply to temporary signs.
  • Signs placed by historical societies for commemorative purposes do not require a building permit and no fee is assessed; they are subject to Building Official approval (and Planning Commission review if disputed).

Sign Plan & Submission Notes for Bedford Township

  • All regulated signs require a sign application approved by the Planning Department for zoning and Section 1922 compliance, and a building permit; the written application must be executed by the sign owner/user (or sign section/insert applicant) and the landowner.
  • If a sign is part of a development that requires a site plan, the sign must be shown and described on the site plan (or an amendment/supplement), and approval is regulated by the Planning Commission.
  • A sign is conclusively presumed to be part of a site-plan development if constructed/erected/located/altered any time prior to six months after the related occupancy permit is first issued; in such cases the sign must be on the site plan and the Planning Commission regulates approval; at other times the Planning Department regulates approval.
  • Community event and special event commercial signs require a sign application and a building permit.
  • Temporary signs pending permanent signs require a sign application reviewed and approved by the Planning Department, an electrical permit if needed, and the building permit for the permanent sign must be obtained before the temporary sign application is approved.
  • Freestanding signs must include a landscaping rendering with the sign application (perimeter landscaping required).
  • Variances for signs may only be granted by the Board of Zoning Appeals; appeals from Planning Department decisions go to the Board of Zoning Appeals.
  • Governmental and community informational signs placed other than in the public right-of-way require Board of Zoning Appeals approval, which regulates design, type, color, size, height, and other features.

Source: municode municipal code