Sign Regulations in Belding, Michigan
Belding, Michigan has specific sign regulations covering 16 sign types across 7 zoning districts. Regulated sign types include Ground Sign, Wall Sign, Temporary Sign - Political. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Belding, Michigan
Sample Sign Requirements in Belding
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Ground Sign | 6 ft. | 32 sq. ft. | 15 ft. from side or rear property line |
| Wall Sign | Not listed | 40 sq. ft. | Not listed |
| Roof Sign | Not listed | 60 sq. ft. | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
16
- Ground Sign
- Wall Sign
- Temporary Sign - Political
- Temporary Sign - Real Estate
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Belding
Other Cities in Michigan
Frequently Asked Questions
In Belding, the height limit for Pole Sign in the General Business District (B-2) is 20 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Belding require a permit. From the submission notes on this page: Amendments to an approved final site plan that propose a reduction in the size of any sign or movement of signs by no more than ten (10) feet are considered minor changes and may be approved administratively; other sign changes require a new site plan to be submitted and reviewed (Section 16.1.D.2.c). Run a code check for an exact address to see the permit requirements for that zone.
Belding's sign code covers 16 sign types, including Ground Sign, Wall Sign, Temporary Sign - Political, and Temporary Sign - Real Estate. Most commercial signs need a permit. The ordinance lists 14 exemptions. One of them: Directional signs, subject to specific requirements, are exempt from permit requirements. The full list is on this page.
In Belding, Ground Sign in the Residential District (R-1, R-2, R-3, RM-1, RM-2) must be set back 15 ft from side or rear property line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Belding's sign ordinance that cover digital, changing, or flashing signs: Except for electronic displays as allowed by this section, no sign shall employ any flashing, moving, oscillating, blinking, or variable intensity light, provided variable time-temperature signs may be permitted. No sign shall contain any moving or animated parts nor have the appearance of having any moving or animated parts. Permanent government signs, including those with an electronic display or reader board, are exempt from permit requirements. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Belding Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Belding, Michigan, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Belding, Michigan Sign Rules at a Glance
Belding, Michigan regulates 16 sign types across 7 zoning districts. Temporary Signs - Political in the General Business District (B-2) are capped at 6 ft tall and 6 sq ft, set back 15 ft from side or rear lot line. Most commercial signs in Belding require a permit.
Detailed Sign Ordinance Requirements for Belding, Michigan
Sign Rules by Zoning District in Belding (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential District (R-1, R-2, R-3, RM-1, RM-2) | 6 | 6 ft. | 60 sq. ft. | Not listed |
| Office Service District (OS-1) | 5 | 6 ft. | 50 sq. ft. | Not listed |
| Neighborhood Business District (B-1) | 8 | 30 ft. | 50 sq. ft. | Not listed |
| General Business District (B-2) | 6 | 35 ft. for pole sign; 6 ft. for ground sign | 150 sq. ft. | Not listed |
| Industrial District (I-1) | 5 | 20 ft. | 40 sq. ft. | Not listed |
| Parking District (P-1) | 5 | 20 ft. | 40 sq. ft. | Not listed |
| General Regulations For All Zones | 5 | 8 ft. | 32 sq. ft. | Not listed |
Zone-by-Zone Sign Requirements in Belding(sample of 3 of 7 zones)
Residential District (R-1, R-2, R-3, RM-1, RM-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign | 6 ft. | 32 sq. ft. | Not listed | 15 ft. from side or rear property line | 1 per major entrance | 15 ft. from side or rear property line; 1 per major entrance | Not listed | Unlock | Section 16.4.J.1, Table 16.4-1 |
| Wall Sign | Not listed | 40 sq. ft. | Not listed | Not listed | 1 per street frontage | On wall facing street; 1 per street frontage | Not listed | Unlock | Section 16.4.J.1, Table 16.4-1 |
| Roof Sign | Not listed | 60 sq. ft. | Not listed | Not listed | 1 per structure | 1 per structure | Not listed | Unlock | Table 16.4-1, Note 4 |
| Temporary Sign - Political | 6 ft. | 6 sq. ft. | Not listed | 15 ft. from side or rear property line | 1 per issue or candidate | 15 ft. from side or rear property line | Not listed | Unlock | Table 16.4-2 |
| Temporary Sign - Real Estate | 6 ft. | 6 sq. ft. | Not listed | 15 ft. from any side or rear lot line | 1 per lot | 15 ft. from any side or rear lot line | Not listed | Unlock | Table 16.4-2 |
| Temporary Sign - Portable | 4 ft. (including frame/chassis/wheels) | 20 sq. ft. | Not listed | 5 ft. from front lot line, 15 ft. from side or rear lot line | 1 per lot or parcel | 5 ft. from front lot line, 15 ft. from side or rear lot line | Not listed | Unlock | Table 16.4-2 |
Neighborhood Business District (B-1)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign | 6 ft. | 32 sq. ft. | Not listed | 5 ft. from front; 15 ft. from side/rear | 1 per lot | 5 ft. from front property line, 15 ft. from side or rear property line | Not listed | Unlock | Table 16.4-1 |
| Wall Sign | Not listed | 40 sq. ft. | Not listed | Not listed | 1 per street frontage | On wall facing street; 1 per street frontage | Not listed | Unlock | Table 16.4-1 |
| Projecting Sign | Not listed | 40 sq. ft. | Not listed | Not listed | 1 per street frontage | On wall facing street; 1 per street frontage | Not listed | Unlock | Table 16.4-1, Note 3 |
| Business Center Sign | 30 ft. | 50 sq. ft. | Not listed | Not listed | 1 per center | One per center | Not listed | Unlock | Section 16.4.J.3.b. |
| Marquee Sign | Not listed | 25 sq. ft. | Not listed | Not listed | 1 per marquee/street frontage | On front fascia of marquee | Not listed | Unlock | Section 16.4.J.4.a. |
| Awning Sign | Not listed | 20 sq. ft. | Not listed | Not listed | 1 per awning/street frontage | Awning | Not listed | Unlock | Section 16.4.J.4.b. |
| Temporary Sign - Political | 6 ft. | 6 sq. ft. | Not listed | 5 ft. from lot line or adjacent building | 1 per issue/candidate | 5 ft. from lot line or adjacent building | Not listed | Unlock | Table 16.4-2 |
| Temporary Sign - Real Estate | 6 ft. | 24 sq. ft. | Not listed | 5 ft. from any side or rear lot line | 1 per lot | 5 ft. from any side or rear lot line | Not listed | Unlock | Table 16.4-2 |
General Business District (B-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign | 6 ft. | 50 sq. ft. | Not listed | 5 ft. from front; 15 ft. from side/rear | 1 per lot (Option 1: either ground or pole) | 5 ft. from front property line; 15 ft. from side or rear property line; 1 per lot. (See Option with Pole Sign) | Not listed | Unlock | Table 16.4-1 |
| Pole Sign | 20 ft. | 100 sq. ft. | Not listed | 5 ft. from front; 15 ft. from side/rear | 1 per lot (Option 2: either pole or ground) | 5 ft. from front property line; 15 ft. from side or rear property line; 1 per lot (in lieu of ground sign) | Not listed | Unlock | Table 16.4-1 |
| Wall Sign | Not listed | 60 sq. ft. | Not listed | Not listed | 1 per street frontage | On wall facing street; 1 per street frontage | Not listed | Unlock | Table 16.4-1 |
| Business Center Sign | 35 ft. for pole sign; 6 ft. for ground sign | 150 sq. ft. | Not listed | 10 ft. from property line for ground sign; 15 ft. for pole sign | 1 per street frontage; max 2 per center | 10 ft. from property line for ground or pole sign; 15 ft. for pole sign; minimum 10 ft. visual clearance required for pole signs. | Not listed | Unlock | Section 16.4.J.3.a. |
| Temporary Sign - Political | 6 ft. | 6 sq. ft. | Not listed | 15 ft. from side or rear lot line | 1 per issue/candidate | 15 ft. from side or rear lot line | Not listed | Unlock | Table 16.4-2 |
| Temporary Sign - Real Estate | 6 ft. | 24 sq. ft. | Not listed | 15 ft. from any side or rear lot line | 1 per lot | 15 ft. from any side or rear lot line | Not listed | Unlock | Table 16.4-2 |
PermitPal covers all 7 zoning districts in Belding. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Belding
- No person shall erect, alter, place or permit to be placed, or replace any sign without first obtaining a sign permit, except those specifically exempted from permit requirements.
- Signs shall be maintained free of peeling paint or paper, fading, staining, rust, or other condition which impairs legibility or intelligibility or creates a blighting, unsightly or unsafe condition.
- Sign supports, braces, guys and anchors shall be maintained in such a manner as not to cause a hazard.
- When a sign is allowed to be illuminated, if externally illuminated, the source of the light shall be enclosed and directed to prevent the source of light from shining directly onto traffic or residential property.
- No sign shall be placed in, upon or over any public right-of-way, alley, or other public place, except as may be otherwise permitted by this section.
- No light pole, utility pole, or other supporting member shall be used for the placement of any sign unless specifically designed and approved for such use.
- No sign shall be erected in any place where it may, by reason of its position, shape, color, or other characteristic, interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal, or device, or constitute a nuisance per se.
- No commercial vehicle, which in the opinion of the zoning administrator has the intended function of acting as a sign, shall be parked in any area abutting the street.
- Except for electronic displays as allowed by this section, no sign shall employ any flashing, moving, oscillating, blinking, or variable intensity light, provided variable time-temperature signs may be permitted.
- No sign shall contain any moving or animated parts nor have the appearance of having any moving or animated parts.
- No wall sign shall extend above or beyond the edge of the wall to which it is affixed.
- Off-premise signs are prohibited, except special event signs as permitted by this section.
- Vehicle signs are prohibited; however, signs attached to a public transit vehicle or other government-owned vehicle shall be exempt.
- Balloon signs are prohibited, except when allowed as a commercial event sign.
- Signs that are held by or supported by a person for commercial advertising purposes are prohibited.
Exempt Signs in Belding
- Directional signs, subject to specific requirements, are exempt from permit requirements.
- Permanent government signs, including those with an electronic display or reader board, are exempt from permit requirements.
- Commercial event signs of four (4) square feet in size or less, except that balloons are not allowed, are exempt from permit requirements.
- Historical markers are exempt from permit requirements.
- Window signs, provided that no more than fifty (50) percent of the window area is covered with signs, are exempt from permit requirements.
- Political signs, subject to specific requirements, are exempt from permit requirements.
- Memorial signs or tablets are exempt from permit requirements.
- Murals, provided that no portion of the mural contains advertising, are exempt from permit requirements.
- Signs not visible from any street or alley are exempt from permit requirements.
- Signs for essential services are exempt from permit requirements.
- Placards not exceeding two (2) square feet are exempt from permit requirements.
- Signs with address, owner, or occupant name, of up to two (2) square feet in area attached to a mailbox, light fixture or exterior wall, are exempt from permit requirements.
- Flags or insignia of any nation, state, city, community organization, or educational institution are exempt from permit requirements.
- Commercial signs mounted to a public transit vehicle or government vehicle are exempt from permit requirements.
Sign Plan & Submission Notes for Belding
- Any sign, including its type, size, area, and location, must be shown on site plans and is part of site plan or sketch plan review (see Section 16.1.C.3.a.2.(vi), which requires 'location of any signs not attached to the building' on preliminary site plans; and Section 16.1.C.3.b.1.(x), which requires 'location, sizes, and type of signs and on-site lighting' on final site plans).
- Amendments to an approved final site plan that propose a reduction in the size of any sign or movement of signs by no more than ten (10) feet are considered minor changes and may be approved administratively; other sign changes require a new site plan to be submitted and reviewed (Section 16.1.D.2.c).
- Sign plans are implicitly required as part of the overall site plan and sketch plan review processes for new development, major alterations, or significant changes to any site where signage is proposed or altered.
Source: municode municipal code