Questions? Call us at (262) 218-2915

Sign Regulations in Chesterfield Charter Township, Michigan

Chesterfield Charter Township, Michigan has specific sign regulations covering 17 sign types across 5 zoning districts. Regulated sign types include Projecting Sign, Hanging Sign, Freestanding Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 21, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Chesterfield Charter Township, Michigan

Sample Sign Requirements in Chesterfield Charter Township

Sign TypeMax HeightMax AreaSetback
Projecting SignMinimum 8 feet above grade; Maximum 30 feet above grade but not above the top of the building's highest wall plateNot listedNot listed
Hanging SignMust be minimum 8 feet above grade; not permitted above top of building's highest wall plateNot listedNot listed
Freestanding Sign8 ft (If over 64 sq ft area, max height increases to 12 ft)64 sq ft (may increase for larger buildings, see additional requirements).10 ft minimum from property lines; per Table 6A

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Chesterfield Charter TownshipFull Coverage

Sign Types Covered

17

  • Projecting Sign
  • Hanging Sign
  • Freestanding Sign
  • Driveway Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Chesterfield Charter Township

Municipal Code1 permit application link available

Frequently Asked Questions

In Chesterfield Charter Township, the height limit for Freestanding Sign in the Nonresidential Districts is 8 ft (If over 64 sq ft area, max height increases to 12 ft). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Chesterfield Charter Township require a permit. From the submission notes on this page: Permit applications for signs must include copies of drawings, plans, specifications, method of construction and attachment, and may require stress sheets and calculations as deemed necessary by the Township. Run a code check for an exact address to see the permit requirements for that zone.

Chesterfield Charter Township's sign code covers 17 sign types, including Projecting Sign, Hanging Sign, Freestanding Sign, and Driveway Sign. Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: No permit is required for ordinary servicing, repainting of existing sign message, or cleaning of a sign. The full list is on this page.

In Chesterfield Charter Township, Freestanding Sign (Multiple-Family Dwellings and Nonresidential Uses) in the Residential Districts must be set back at least 10 ft from all property lines. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Chesterfield Charter Township's sign ordinance that cover digital, changing, or flashing signs: Any sign that gives the appearance of motion, including moving, scrolling, animated, or flashing elements. This includes changes of illumination levels and color, except as approved by special event permit. Signs shall not have any change to add mechanical or electronic features, except monitors to regulate brightness in accordance with the code (for nonconforming signs). Permit applications for illuminated electronic signs must include a copy of the manufacturer's specifications for luminance. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Chesterfield Charter Township Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Chesterfield Charter Township, Michigan, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Chesterfield Charter Township, Michigan Sign Rules at a Glance

Chesterfield Charter Township, Michigan regulates 17 sign types across 5 zoning districts. Driveway Signs in the Nonresidential Districts are capped at 42 inches tall and 3 sq ft per sign, set back at least 10 feet from property line and driveway. Most commercial signs in Chesterfield Charter Township require a permit.

Detailed Sign Ordinance Requirements for Chesterfield Charter Township, Michigan

Sign Rules by Zoning District in Chesterfield Charter Township (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Nonresidential Districts642 inches160 sq ft; up to 400 sq ft if building is set back greater than 200 ft, per formulaNot listed
Residential Districts5No higher than top of awning; for canopy or projection above entryways, no higher than top of projection; individual metal letters/numbers up to 12 inches high may be above edge32 sq ft per parcelNot listed
C-3, C-4, RT, M-1, M-2, Township-owned property125 ft300 sq ft per faceNot listed
C-1, C-22Not listed15% of window area per facadeNot listed
General Regulations For All Zones36 ft for nonresidential; 5 ft for residential lots20 sq ft per building for nonresidential; 3 sq ft for single-family res.; 12 sq ft for multi-family res.Not listed

Zone-by-Zone Sign Requirements in Chesterfield Charter Township(sample of 3 of 5 zones)

Nonresidential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Projecting SignMinimum 8 feet above grade; Maximum 30 feet above grade but not above the top of the building's highest wall plateNot listedNot listedNot listed1 per business facadeThe outside edge of the sign shall not project more than 4 feet from a wall of a buildingNot listedUnlockSec. 52-6(a) Table 6A
Hanging SignMust be minimum 8 feet above grade; not permitted above top of building's highest wall plateNot listedNot listedNot listed1 per business facadeUnder a first floor canopy, awning, or similar projecting structure above an entrywayNot listedUnlockSec. 52-6(a) Table 6A
Freestanding Sign8 ft (If over 64 sq ft area, max height increases to 12 ft)64 sq ft (may increase for larger buildings, see additional requirements).Not listed10 ft minimum from property lines; per Table 6A1 per street frontage (2 if permitted under special criteria)10 ft min from property lines; min spacing of 200 ft diagonal between freestanding signsNot listedUnlockSec. 52-6(a) Table 6A and associated notes
Driveway Sign42 inches3 sq ft per signNot listedAt least 10 feet from property line and driveway1 per drivewayAdjacent to driveway(s), at least 10 feet from property line and drivewayNot listedUnlockSec. 52-6(a) Table 6A
Wall SignNot listed160 sq ft; up to 400 sq ft if building is set back greater than 200 ft, per formulaNot listedNot listed3 per buildingShall not project more than 12 inches horizontally beyond the wall; placed per note (between appropriate architectural elements per number of stories)Not listedUnlockSec. 52-6(a) Table 6A and notes
Awning and Canopy SignNo higher than the top of the awning; for canopies and similar, no higher than the top of projectionNo more than 25% of awning/canopy areaNot listedNot listed1 per business facadeAwnings: on awning surface, drip edge preferred; Canopies and other projections above entryways: on face; individual metal letters/numbers up to 12 inches high may be placed above edgeNot listedUnlockSec. 52-6(a) Table 6A, notes

Residential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Single- and Two-Family Dwellings)Shall be below the eave line for the ground floor. For single-story, no higher than two feet above front door.2 sq ftNot listedNot listed1 per dwellingEntire sign within 4 feet of the front doorNot listedUnlockSec. 52-6(b) Table 6B and notes
Wall Sign (Multiple-Family Dwellings)Placement as per note: depends on number of stories (between top of ground floor windows and bottom of cornice/eave, or as specified for multi-story buildings)12 sq ft per buildingNot listedNot listed1 per buildingPer placement note in Table 6BNot listedUnlockSec. 52-6(b) Table 6B and notes
Wall Sign (Permitted Nonresidential Uses)Not listed20 sq ftNot listedNot listed1 per buildingNot listedNot listedUnlockSec. 52-6(b) Table 6B
Freestanding Sign (Multiple-Family Dwellings and Nonresidential Uses)8 ft32 sq ft per parcelNot listed10 ft minimum from all property lines1 per parcel10 ft minimum from all property linesNot listedUnlockSec. 52-6(b) Table 6B
Awning and Canopy Sign (Nonresidential Uses)No higher than top of awning; for canopy or projection above entryways, no higher than top of projection; individual metal letters/numbers up to 12 inches high may be above edge25% of awning/canopy area (counts toward wall sign max)Not listedNot listed1 per business or institutional facadeAwnings: surface, drip edge preferred; Canopies above entry: face or above edge (up to 12 in letters)Not listedUnlockSec. 52-6(b) Table 6B; notes

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Wall SignNot higher than eave/roof or bottom of other building top element (like cornice)20 sq ft per building for nonresidential; 3 sq ft for single-family res.; 12 sq ft for multi-family res.Not listedNot listedNot listedNot listedNot listedUnlockSec. 52-8(a) Table 8A, Sec. 52-8(b)
Temporary Freestanding Sign6 ft for nonresidential; 5 ft for residential lots20 sq ft per sign for nonresidential; 6 sq ft for residentialNot listed5 ft min from all property linesNot listedMin 5 ft from property linesNot listedUnlockSec. 52-8(a) Table 8A, Sec. 52-8(b)
Window Sign (General)Not listed3 sq ft per dwelling unit (residential); 15% of window area on any facade (all other districts)Not listedNot listedNot listedWindow of dwelling unit or facadeNot listedUnlockSec. 52-7

PermitPal covers all 5 zoning districts in Chesterfield Charter Township. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Chesterfield Charter Township

  • Any sign that is not specifically permitted by this chapter is prohibited.
  • Any sign that gives the appearance of motion, including moving, scrolling, animated, or flashing elements. This includes changes of illumination levels and color, except as approved by special event permit.
  • Exterior pennants, spinners, inflatables, feather signs, and streamers.
  • Any sign which is structurally or electrically unsafe.
  • Any sign erected on a tree, street furniture, wall surfaces (except permitted wall signs or projecting signs) or utility pole.
  • Rope light, string light, neon, or similar lighting attached to, surrounding or otherwise drawing attention to a sign unless expressly permitted in limited applications within this chapter.
  • Any sign erected on or projecting into the public right-of-way, except signs expressly permitted in the right-of-way in this chapter.
  • Signs that imitate a traffic control device.
  • Cloth signs.
  • Changeable copy signs, except as part of a permanent sign as provided in this chapter.
  • Signs mounted on, painted on, projecting from, or otherwise located on the roof of a building.
  • Signs that are created as a result of an illuminated projection.
  • No sign shall be located in, project into or overhang a public right-of-way or dedicated public easement unless otherwise expressly permitted.
  • No sign shall interfere with the clear vision sight triangle at driveways and intersections.
  • All signs shall be affixed to a building or to the ground.
  • No signs shall be located so as to impede pedestrian or automobile traffic.
  • In no case shall any sign be closer than 10 feet to any property line, road right-of-way or road easement except for permitted projecting and hanging signs and temporary signs.
  • Signs, including the face, framing and all supports thereof, shall be kept and maintained in a safe condition, shall be adequately protected against corrosion.
  • Signs which are broken, torn, bent or whose supports are broken, bent or damaged, and signs not reasonably level and plumb shall be repaired and reinstalled as prescribed.
  • A sign shall have no more than 20% of its surface area covered with disfigured, cracked, rippled or peeling paint, poster paper or other material for more than 30 successive days.
  • A sign shall not stand with bent or broken sign facing, with broken supports, with loose appendages or struts, or more than 15° from vertical for more than 30 successive days, unless deemed a safety hazard, then immediate action is required.
  • A sign shall not have weeds, vines, or other vegetation growing upon it for more than 30 successive days.
  • An internally illuminated sign shall not be allowed to stand with only partial illumination for more than 30 successive days.
  • Any sign erected or displayed without a permit, unless expressly exempt, or any sign not in compliance may be deemed a hazard and public nuisance per se.
  • All signs shall be maintained in good structural condition, in compliance with all building and electrical codes, and in conformance with this chapter.
  • Any sign structure now or hereafter existing which no longer conveys a message or contains a sign shall be removed.
  • Temporary signs shall not be illuminated.
  • No sign shall have a width-to-length or length-to-width ratio that exceeds 4:1 except that wall signs shall not exceed an 8:1 ratio.
  • Signs shall not have any change made that results in different or greater illumination or change a nonluminescent sign to a luminescent sign (for nonconforming signs).
  • Signs shall not have any change to add mechanical or electronic features, except monitors to regulate brightness in accordance with the code (for nonconforming signs).

Exempt Signs in Chesterfield Charter Township

  • No permit is required for ordinary servicing, repainting of existing sign message, or cleaning of a sign.
  • No permit is required for change of message of a sign designed for periodic message change without change of structure, including a bulletin board or billboard.
  • Three square feet of temporary freestanding or temporary wall sign area is allowed on each zoning lot at any time and without expiration of display time. No permit is required for this sign.
  • Applied or etched lettering or designs that are within the lower eight inches of any ground floor window shall be permitted and shall not be considered part of the total area of window or wall signs, provided requirements are met.
  • Addresses 12 inches or less in height in residential districts and 24 inches or less in height in nonresidential districts shall not be included in the calculation of total sign area and may be illuminated without time restrictions.
  • Noncommercial messages shall be permitted on any sign constructed or erected in compliance with this chapter.
  • Window signs and temporary signs in residential districts, as well as freestanding temporary signs in nonresidential districts, are exempt from permit requirements.

Sign Plan & Submission Notes for Chesterfield Charter Township

  • Permit applications for signs must include copies of drawings, plans, specifications, method of construction and attachment, and may require stress sheets and calculations as deemed necessary by the Township.
  • Permanent signs, except temporary signs in residential districts, window signs, and freestanding temporary signs in nonresidential districts, require a permit from the Township.
  • Outdoor advertising signs require Planning Commission approval; other signs are approved by the Planning and Zoning Administrator or designee.
  • Permit applications for illuminated electronic signs must include a copy of the manufacturer's specifications for luminance.
  • The Planning Commission may grant dimensional variances for signs upon meeting specified findings at a variance meeting.
  • If an applicant disagrees with the Ordinance Officer's interpretation, they may request an interpretation by the Planning Commission.
  • In cases where public safety requires, sign permit applications may require certification by a registered architect or engineer as a condition to issuance of a permit.
  • Building Department approval is required for all signs as required by the Township to satisfy building, electrical, fire and other construction codes.
  • The number of plans to be submitted with a sign application is established by resolution of the Township Board.

Source: ecode360 municipal code