Questions? Call us at (262) 218-2915

Sign Regulations in Clinton, Michigan

Clinton, Michigan has specific sign regulations covering 36 sign types across 8 zoning districts. Regulated sign types include Wall Sign, On-site Sign (Farm Product), Home Occupation Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Clinton, Michigan

Sample Sign Requirements in Clinton

Sign TypeMax HeightMax AreaSetback
Billboard (Off-site)22 feet; minimum 7 feet clearance300 sq ft per sign face50 feet from edge of ROW; 25 feet from any non-ROW property line
On-site Sign (Farm Product)4 feet12 sq ftNo closer than half the required minimum front setback
On-site Sign6 feet24 sq ft or 12 sq ft (applies to other than farm product)No closer than half the required minimum front setback

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for ClintonFull Coverage

Sign Types Covered

36

  • Wall Sign
  • On-site Sign (Farm Product)
  • Home Occupation Sign
  • Window Sign
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Clinton

City WebsiteMunicipal Code3 permit application links available

Frequently Asked Questions

In Clinton, the height limit for Monument Sign (C-1, C-4, I) in the General Commercial District (C-1) and other zoning districts is 16 feet. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Clinton require a permit. From the submission notes on this page: Submission of a plan or drawing is required with the application for a zoning compliance permit (see Sec. 66-34(a)(2)), including the location and dimensions of the proposed sign. Run a code check for an exact address to see the permit requirements for that zone.

Clinton's sign code covers 36 sign types, including Wall Sign, On-site Sign (Farm Product), Home Occupation Sign, and Window Sign. Most commercial signs need a permit. The ordinance lists 10 exemptions. One of them: One nameplate of not more than two square feet in surface area per business, residence or building does not require a zoning compliance permit. The full list is on this page.

In Clinton, Directional/Informational Sign (Freestanding) in the General Commercial District (C-1) and other zoning districts must be set back at least 3 feet from right-of-way/property line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Clinton's sign ordinance that cover digital, changing, or flashing signs: Animated signs are prohibited. Electronic messaging signs are prohibited. Flashing signs are prohibited, except for flashing signs of two square feet or less where permitted. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Clinton Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Clinton, Michigan, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Clinton, Michigan Sign Rules at a Glance

Clinton, Michigan regulates 36 sign types across 8 zoning districts. Directional/Informational Signs (Freestanding) in the General Commercial District (C-1) and other zoning districts are capped at 3 feet tall and 2 sq ft per sign, set back at least 3 feet from right-of-way/property line. Most commercial signs in Clinton require a permit.

Detailed Sign Ordinance Requirements for Clinton, Michigan

Sign Rules by Zoning District in Clinton (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Agriculture District (AG)522 feet; minimum 7 feet clearance300 sq ft per sign faceNot listed
Recreation Open Space District (RO)26 feet32 sq ftNot listed
Low Density Residential District (R-1), Medium Density Residential District (R-2), High Density Residential District (R-3), Planned Unit Residential District (R-4), Mobile Home Residential District (MH-1)5Mounted not more than 15 feet high25 sq ftNot listed
High Density Residential District (R-3)36 feet32 sq ftNot listed
General Commercial District (C-1), Highway Service Commercial District (C-2), Light Industrial District (I), Local Service Commercial District (C-4)816 feet60 sq ftNot listed
Central Business District (C-3)940 inches60 sq ftNot listed
Planned Mixed Use District (PMU)1As per the most permissive similar use, e.g., monument 16 ft, wall as permittedAs per the most permissive similar use in C-1/C-2/I/C-4 (see above for specifics)Not listed
General Regulations For All Zones98 feet32 sq ftNot listed

Zone-by-Zone Sign Requirements in Clinton(sample of 3 of 8 zones)

General Commercial District (C-1), Highway Service Commercial District (C-2), Light Industrial District (I), Local Service Commercial District (C-4)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Directional/Informational Sign (Freestanding)3 feet2 sq ft per signNot listedMinimum 3 feet from ROW/property lineNot specifiedFreestanding; on-siteNot listedUnlockSec. 66-302(l)(5); Signage Table
Directional/Informational Sign (Wall mounted)Below top of building facade or eave line6 sq ft per signNot listedNot listedNot specifiedWall mounted, below eave/building facade topNot listedUnlockSec. 66-302(l)(6); Signage Table
Monument Sign (C-1, C-4, I)16 feet32 sq ft per signNot listedNo closer than half required minimum front yard depth1 per commercial building not part of shopping centerOn-siteNot listedUnlockSec. 66-302(l)(7); Signage Table
Monument Sign (C-2, I)16 feet48 sq ft per signNot listedNo closer than half required minimum front yard depth1 per commercial building not part of groupOn-siteNot listedUnlockSec. 66-302(l)(7); Signage Table
Wall SignNot listed60 sq ftNot listedNot listed1 per wall facing public street/alleywayEach wall facing a public street or public alleywayNot listedUnlockSec. 66-302(l)(8); Signage Table
Window SignStreet level windows15% of total surface area of street level facade windows; not to exceed 25% of area of any individual windowNot listedNot listedNot listedWindow, street levelNot listedUnlockSec. 66-302(l)(9); Signage Table
Flashing Sign (Window)First floor only2 sq ftNot listedNot listedNot listedWindowNot listedUnlockSec. 66-302(l)(10); Signage Table
Feather Flag Sign8 feet16 sq ft (cumulative)Not listedOut of ROW or at least 10 feet from curb1 per 100 ft, max 4Out of street ROW/10 feet from curbNot listedUnlockSec. 66-302(l)(11)

Central Business District (C-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Projecting SignNot listed12 sq ftNot listedNot listedNot listedBuilding facadeNot listedUnlockSec. 66-302(m)(1); Signage Table
Awning/Canopy SignNot listedNot listedNot listedNot listedNot listedAwning/canopy on buildingNot listedUnlockSec. 66-302(m)(2); Signage Table
Wall SignNot listed60 sq ftNot listedNot listed1 per wall facing street/alleywayBuilding wall, facing street/alleywayNot listedUnlockSec. 66-302(m)(3); Signage Table
Marquee SignNot listed60 sq ftNot listedNot listedNot listedMarqueeNot listedUnlockSec. 66-302(m)(2); Signage Table
Window SignStreet-level windows15% of total surface area of street-level windows; max 25% of any individual windowNot listedNot listedNot listedStreet-level windowsNot listedUnlockSec. 66-302(m)(5); Signage Table
Flashing Sign (Window)Not listed2 sq ftNot listedNot listedNot listedWindowNot listedUnlockSec. 66-302(m)(6); Signage Table
Feather Flag Sign (Special Events Only)8 feet16 sq ft (cumulative)Not listedOut of ROW or at least 10 feet from curb1 per 100 ft, max 2Out of ROW or at least 10 feet from curbNot listedUnlockSec. 66-302(m)(7)
A-frame (Sandwich Board) Sign40 inches6 sq ft per sideNot listedNot listed1 per businessAdjacent to sidewalk immediately adjacent to businessNot listedUnlockSec. 66-302(m)(8); Signage Table

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
NameplateNot listed2 sq ftNot listedNot listed1 per business/residence/buildingOn-site; 1 per business/residence/buildingNot listedUnlockSec. 66-302(d)(1), (Sign Exemptions)
Incidental SignNot listedNot listedNot listedNot listedNot listedOn-siteNot listedUnlockSec. 66-302(d)(2)
Noncommercial Sign (Election, Opinion, etc.)Not listed6 sq ftNot listedOut of ROW and sight triangle; at least 100 feet from polling place entrance on election dayNot listedOn private property; not in ROW/sight triangleNot listedUnlockSec. 66-302(d)(3)
For Sale (Vehicle/Personal Articles)Not listed6 sq ftNot listedNot listedNot listedOn item for sale; temporarily on propertyNot listedUnlockSec. 66-302(d)(4)
Garage/Yard Sale SignNot listed2 sq ftNot listedNot listedNot listedOn-site or with permissionNot listedUnlockSec. 66-302(d)(5)
Real Estate Sign7 feet from grade6 sq ft per parcel (R-1, R-2, R-3); 12 sq ft per parcel (other zones)Not listedNot listed1 per parcelOn for-sale/rental propertyNot listedUnlockSec. 66-302(d)(6)
Safety/Warning/TrespassingNot listed2 sq ft (some warning signs may be 6 sq ft)Not listedNot listedNot listedNot listedNot listedUnlockSec. 66-302(d)(7), (d)(10)
Construction Sign8 feet32 sq ftNot listedNo closer than half the required front yard/setback for district1 per ROW frontage per parcelOn-siteNot listedUnlockSec. 66-302(e)(2)

PermitPal covers all 8 zoning districts in Clinton. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Clinton

  • No sign shall be erected at any location where, by reason of its position, size, shape, color, animation or illumination, it may interfere with or obstruct the view of traffic, nor shall any sign be permitted which may be confused with any authorized traffic sign, signal or device. No sign may be placed within the sight clearance triangle.
  • No person shall erect, display or maintain any sign which obstructs any fire escape, building entrance or public passage or which is at a horizontal distance less than ten feet from any fire hydrant or traffic light.
  • All signs must comply with the site clearance triangle regulations.
  • Animated signs are prohibited.
  • Balloon signs are prohibited.
  • Electronic messaging signs are prohibited.
  • Flashing signs are prohibited, except for flashing signs of two square feet or less where permitted.
  • Off-premise signs are prohibited, except as allowed in this section.
  • Pole signs are prohibited, excluding billboards.
  • Roof signs are prohibited.
  • Signs that emit audible sound, odor or visible matter are prohibited.
  • Signs which hide from view all or any part of any traffic sign, street sign, or traffic signal are prohibited.
  • Signs which are pasted or attached to utility poles or placed upon trees, fences, rocks, or in an unauthorized manner to walls or other signs are prohibited.
  • Signs located in, or which project into, or overhang any public right-of-way except as allowed by local, state, or federal law or regulation are prohibited.
  • Signs which are of a size, location, movement, content, coloring, or manner of illumination which may cause any unsafe distraction for motor vehicle operators are prohibited.

Exempt Signs in Clinton

  • One nameplate of not more than two square feet in surface area per business, residence or building does not require a zoning compliance permit.
  • Incidental signs except in areas zoned residential do not require a zoning compliance permit.
  • Non-commercial signs of not more than six square feet in area which pertain to an election are exempt for a period of 60 days prior to and five days after the election. Must be on private property outside of any street right-of-way or sight clearance triangle and at least 100 feet from any polling place entrance on an election day.
  • "For sale" signs of less than six square feet in area and attached to vehicles, personal possessions and articles of a noncommercial nature are exempt for a period of ten days.
  • "Garage sale" and "yard sale" signs when less than two square feet in area and displayed on the owner's property or on other property with the owner's permission for seven days with village approved garage sale permit. These signs cannot be attached to public utility poles.
  • One nonilluminated real estate sign not to exceed six square feet in surface area per parcel or 12 square feet in surface area if zoned other than R-1, R-2 or R-3. Not to project higher than seven feet above grade. Must be removed within 30 days after the sale or rental of the property.
  • Trespassing, safety or caution signs not exceeding two square feet in area.
  • Public signs of a noncommercial nature erected by or on the order of a public officer or building official in the performance of public duty, and/or required to ensure public safety.
  • Flags indicating the insignia of any nation, state, municipal, college, or university.
  • Warning signs, such as no trespassing, warning of electrical currents or animals, provided that such signs do not exceed six square feet in area.

Sign Plan & Submission Notes for Clinton

  • A zoning compliance permit is required for the erection, construction, relocation or alteration of any sign, except as noted in the exemptions under subsection d.
  • All signs must comply with the Michigan Building Code.
  • Submission of a plan or drawing is required with the application for a zoning compliance permit (see Sec. 66-34(a)(2)), including the location and dimensions of the proposed sign.
  • Site plan review may be required for developments that include signage, particularly for commercial, industrial, multiple-family, and certain special district uses (see Sec. 66-307 and related district regulations).
  • Changes to nonconforming signs, or requests for variances from sign regulations, may require action before the Zoning Board of Appeals.

Source: municode municipal code