Sign Regulations in Coldwater, Michigan
Coldwater, Michigan has specific sign regulations covering 25 sign types across 5 zoning districts. Regulated sign types include Freestanding Sign, Wall Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: December 3, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Coldwater, Michigan
Sample Sign Requirements in Coldwater
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign | 15 feet | Not listed | Minimum 2 feet from public street right-of-way |
| Wall Sign | Not listed | Not listed | Minimum 2 feet from public street right-of-way |
| Changeable Copy Sign | Not listed | 50% of total sign area (manual); 100% of total sign area (automated) | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
25
- Freestanding Sign
- Wall Sign
- Projecting Sign
- Monument Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Coldwater
Other Cities in Michigan
Frequently Asked Questions
In Coldwater, the height limit for Monument Sign in the Non-residential Districts (C-1, C-3, C-4, D-1, D-2) is 15 feet (Sec. 5.1.D.3). The height limit for Wall Sign (Standard) in the Non-residential Districts (C-2, OS) is 3 feet (if using frontage method) (Sec. 5.1.E.1). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Coldwater require a permit. From the submission notes on this page: Applications for sign permits must include plans, drawings, and specifications detailing type, size, shape, location, construction, materials, weight, frame, anchorage, and guys (Section 5.1.B.2). Run a code check for an exact address to see the permit requirements for that zone.
Coldwater's sign code covers 25 sign types, including Freestanding Sign, Wall Sign, Projecting Sign, and Monument Sign. Most commercial signs need a permit. The ordinance lists 15 exemptions. One of them: No permit required for signs erected by City, County, State or Federal Government for street direction or traffic control (must comply with height, area, location regulations). The full list is on this page.
In Coldwater, Freestanding Sign must be set back at least 2 feet from public street right-of-way. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Coldwater's sign ordinance that cover digital, changing, or flashing signs: Animated signs and/or flashing signs are prohibited in all zoning districts (except traffic control devices). No permit required for essential service signs denoting utility lines, railroad lines, hazards, precautions, including portable flashing signs (must comply with height, area, location regulations). Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Coldwater Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Coldwater, Michigan, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Coldwater, Michigan Sign Rules at a Glance
Coldwater, Michigan regulates 25 sign types across 5 zoning districts. Monument Signs in the Non-residential Districts (C-2, OS) are capped at 6 feet tall and 32 square feet (Sec. 5.1.E.3). Most commercial signs in Coldwater require a permit.
Detailed Sign Ordinance Requirements for Coldwater, Michigan
Sign Rules by Zoning District in Coldwater (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 5 | 15 feet | 50% of total sign area (manual); 100% of total sign area (automated) | Not listed |
| Residential Districts (AA, R-3, A-1, A-2, A-3) | 8 | 6 feet | 32 square feet | Not listed |
| Non-residential Districts (C-1, C-3, C-4, D-1, D-2) | 10 | 15 feet | 200 square feet total for all exterior signs; 24 square feet if no ground floor frontage | Not listed |
| Non-residential Districts (C-2, OS) | 6 | 6 feet | 32 square feet | Not listed |
| Zoning Districts Adjacent to I-69 | 1 | 30 feet above ground grade or abutting roadway grade (whichever higher) | 300 square feet per side | Not listed |
Zone-by-Zone Sign Requirements in Coldwater(sample of 3 of 5 zones)
Residential Districts (AA, R-3, A-1, A-2, A-3)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Directional/Regulatory Sign | Not listed | Not listed | Not listed | Comply with general (2 ft from ROW) | As determined | In parking areas | Not listed | Unlock | 5.1.C.1 |
| Monument Sign (Non-Residential Use) | 6 feet | 32 square feet | Not listed | Comply with general (2 ft from ROW) | 1 | On non-residential property | Not listed | Unlock | 5.1.C.2 |
| Customary Farm and Crop Sign | Not listed | Not listed | Not listed | Comply with general | Not listed | On active farms | Not listed | Unlock | 5.1.C.3 |
| Subdivision Entranceway Sign | Not listed | 32 square feet | Not listed | Comply with general | As appropriate for entrances | At subdivision entrance | Not listed | Unlock | 5.1.C.4 |
| Nameplate Sign | Not listed | 2 square feet | Not listed | Comply with general | 1 per dwelling unit | For each dwelling unit | Not listed | Unlock | 5.1.C.5 |
| Temporary Lease or Sale Sign | 4 feet | 6 square feet | Not listed | Comply with general | 1 (or per frontage) | On premises; corner lots 1 per street frontage | Not listed | Unlock | 5.1.C.7.a |
| Temporary Garage Sale Sign | Not listed | 6 square feet | Not listed | Comply with general | 1 | Within property line | Not listed | Unlock | 5.1.C.7.b |
| Temporary Construction Sign (Residential) | Not listed | 24 square feet | Not listed | Comply with general | 1 | On construction site | Not listed | Unlock | 5.1.C.7.c |
Non-residential Districts (C-1, C-3, C-4, D-1, D-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 200 square feet total for all exterior signs; 24 square feet if no ground floor frontage | Not listed | Comply with general (2 ft from ROW) | 1 per exterior façade | Attached to exterior wall of building | Not listed | Unlock | 5.1.D.1.a; 5.1.D.2; 5.1.D.4.b |
| Freestanding Sign | 15 feet | 75 square feet total for all exterior freestanding signs | Not listed | Comply with general (2 ft from ROW) | 1 per occupied parcel (business center as specified) | On-site | Not listed | Unlock | 5.1.D.1.b; 5.1.D.2; 5.1.D.3; 5.1.D.4.a |
| Monument Sign | 15 feet | Not listed | Not listed | Comply with general | Included in freestanding | On-site | Not listed | Unlock | 5.1.D.3 |
| Menuboard Sign | Not listed | 36 square feet | Not listed | Not listed | 2 per establishment | Rear yard | Not listed | Unlock | 5.1.D.5 |
| Temporary Commercial Message Sign | Not listed | 24 square feet | Not listed | Comply with general | 1 | On premises | Not listed | Unlock | 5.1.D.6.a |
| Temporary Real Estate Sign | 8 feet | 20 square feet | Not listed | Comply with general | 1 | On premises | Not listed | Unlock | 5.1.D.6.b |
| Temporary Construction Sign | Not listed | 24 square feet | Not listed | Comply with general | 1 | On site | Not listed | Unlock | 5.1.D.6.c |
| Window Sign | Not listed | Not listed | Not listed | Not listed | Not listed | On windows | Not listed | Unlock | 5.1.D.7 |
Non-residential Districts (C-2, OS)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Standard) | 3 feet (if using frontage method) | As per formula | Not listed | Comply with general (no 2 ft min in C-2) | 1 per building | On exterior wall; downtown: between top of 1st story windows and bottom of 2nd story lowest window | Not listed | Unlock | 5.1.E.1 |
| Wall Sign (Additional Tenant) | Not listed | 12 square feet | Not listed | Comply with general | 1 per additional access | On exterior wall facing public alley, parking lot, or street with additional access | Not listed | Unlock | 5.1.E.2.a |
| Projecting Sign | Not listed | 12 square feet | 4 feet | Comply with general | Not listed | Attached to building | Not listed | Unlock | 5.1.E.2.b |
| Window Sign | Not listed | 25% of total window area per floor level OR 50 square feet total per building | Not listed | Not listed | Not listed | On window surface | Not listed | Unlock | 5.1.E.2.c |
| Monument Sign | 6 feet | 32 square feet | Not listed | Sufficient to meet required setbacks | 1 | On occupied parcels with sufficient lawn/parking for setbacks | Not listed | Unlock | 5.1.E.3 |
| Sandwich Board Sign | Not listed | 7.5 square feet (30 inches wide by 36 inches tall) | 30 inches | Not listed | 1 per address | In front of sponsoring business on sidewalk | Not listed | Unlock | 5.1.E.4 |
PermitPal covers all 5 zoning districts in Coldwater. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Coldwater
- No person shall erect, place or maintain a sign except in accordance with the provisions of this chapter.
- Abandoned signs are prohibited in all zoning districts.
- Air-filled or gas-filled balloon signs are prohibited in all zoning districts.
- Animated signs and/or flashing signs are prohibited in all zoning districts (except traffic control devices).
- Street furniture signs are prohibited in all zoning districts (except at bus stops).
- Roof signs are prohibited in all zoning districts.
- Off-premise signs are prohibited in all zoning districts.
- Signs carried, waved or otherwise displayed by persons on public rights-of-way or visible from them for commercial purposes are prohibited (does not limit displays for demonstrations, political rallies, etc.).
- Signage on publicly owned land or inside street rights-of-way is prohibited except those erected by City, County, State or Federal Government.
- Temporary or portable signs are prohibited unless otherwise specified in the Ordinance.
- Any sign not specifically permitted in each zoning district and/or designated use category is prohibited.
- No sign shall emulate or imitate traffic signs or signals, or interfere with, mislead or confuse the public regarding traffic signs or signals, or obstruct their view.
- Exterior signs shall not interfere with traffic visibility, considering height, area, structure, lighting, location relative to roads, drives, parking, sidewalks, buildings, and Section 5.8 Traffic Visibility Across Corner Lots.
- No sign shall be located closer than two feet to a public street right-of-way (except in C-2 District).
- No portion of any sign shall overhang a public street right-of-way (except in C-2 District); projecting signs over public property must be at least 12 feet above sidewalk grade, or 9 feet for wall or marquee signs.
- No exterior freestanding sign, signboard or billboard sign shall exceed 15 feet in height.
- Signs shall not utilize exposed incandescent lamps without sunscreen or diffusion, or exceeding 160 watts without shielding; no revolving beacon lights; metal halide, fluorescent, and quartz lighting must be in enclosed luminaries; neon/argon/krypton tubes may be used if not flashing or creating movement; lighting must avoid glare to traffic or residential areas; no flashing, oscillating or intermittent lighting; burned out luminaires must be replaced within 10 business days.
- Manual changeable copy is limited to 50% of total sign area (exceeding this is prohibited).
Exempt Signs in Coldwater
- No permit required for signs erected by City, County, State or Federal Government for street direction or traffic control (must comply with height, area, location regulations).
- No permit required for governmental use signs, including integral signs, erected by governmental agencies for parks, parking lots, recreational areas, public spaces, or governmental buildings (must comply with height, area, location regulations).
- No permit required for signs of public organizations under order and permission of Council (must comply with height, area, location regulations).
- No permit required for posting of legal notices required by law (must comply with height, area, location regulations).
- No permit required for signs designating sites recognized by State Historical Commission as centennial farms or historic landmarks (must comply with height, area, location regulations).
- No permit required for real estate signs under 6 square feet advertising premises for sale, rent, or lease (must comply with height, area, location regulations).
- No permit required for political signs not exceeding 6 square feet total, on private property, removed within 10 days after election (must comply with height, area, location regulations).
- No permit required for placards posted to control and/or prohibit hunting within the City (must comply with height, area, location regulations).
- No permit required for essential service signs denoting utility lines, railroad lines, hazards, precautions, including portable flashing signs (must comply with height, area, location regulations).
- No permit required for integral signs cut into masonry or of bronze/other incombustible material, flat on building face (must comply with height, area, location regulations).
- No permit required for special decorative displays, signs, pennants, flags or banners for holidays, public demonstrations promoting civic welfare or charitable purposes, used no more than 14 days (must comply with height, area, location regulations).
- No permit required for temporary signs except as provided in each zoning district (must comply with height, area, location regulations).
- No permit required for maintenance of a sign.
- No permit required for replacement of a panel on an existing box sign.
- No permit required for change of copy on painted, printed or changeable copy signs.
Sign Plan & Submission Notes for Coldwater
- Applications for sign permits must include plans, drawings, and specifications detailing type, size, shape, location, construction, materials, weight, frame, anchorage, and guys (Section 5.1.B.2).
- A scale drawing of sign dimensions or area and evidence of secure attachment must be provided; for freestanding signs, a site development plan of location and scale drawing of structure is required (Section 5.1.B.3).
- Directional/regulatory signs in residential parking areas require site plan review by Planning Commission or Zoning Administrator to determine size and necessity (Section 5.1.C.1).
- Subdivision entranceway signs must have design consistent with development theme, using natural or approved materials (no plywood, chipboard); implies approval process (Section 5.1.C.4).
- Temporary construction signs in residential require City Council final approval before erection (Section 5.1.C.7.c).
- Business center signs require compliance with specified sizes and locations, implying plan review (Section 5.1.D.4).
- Temporary construction signs in non-residential districts require removal upon certificate of occupancy or 75% development (Section 5.1.D.6.c).
- Projecting signs in C-2/OS must meet building code for supports (Section 5.1.E.2.b).
- Billboards adjacent to I-69 require compliance with spacing, location, size, height, and construction standards, plus Highway Advertising Act (Sections 5.1.F, 5.1.F.9).
- Nonconforming signs may require Zoning Board of Appeals determination for repair after damage exceeding 50% replacement cost (Section 5.1.G.3).
- All signs must meet construction requirements and may be inspected; unsafe signs require repair or removal (Section 5.1.H).
Source: other municipal code