Sign Regulations in Grand Ledge, Michigan

Grand Ledge, Michigan has specific sign regulations covering 19 sign types across 6 zoning districts. Regulated sign types include Wall Sign, Nameplate Sign, Accessory Sign (Gasoline Pump). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Sign Regulation Overview for Grand Ledge, Michigan

Sample Sign Requirements in Grand Ledge

Sign TypeMax HeightMax AreaSetback
Nameplate Sign (Home Occupation/Professional Service)3 sq ft
Ground Sign (Subdivision/Multiple Housing/Nursing Home/Convalescent/Adult Foster Facility)6 ft32 sq ftAt least 10 ft from future road right-of-way
Temporary Sign (New Residential Development)6 ft32 sq ftAt least 20 ft from future road right-of-way

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Grand LedgeFull Coverage

Sign Types Covered

19

  • Wall Sign
  • Nameplate Sign
  • Accessory Sign (Gasoline Pump)
  • Ground Sign (On-premises)
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Grand Ledge

City WebsiteMunicipal Code3 permit application links available

Frequently Asked Questions

Sign height limits in Grand Ledge vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Grand Ledge, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Grand Ledge, regulated sign types include Wall Sign, Nameplate Sign, Accessory Sign (Gasoline Pump), Ground Sign (On-premises), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Grand Ledge vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Grand Ledge are regulated with specific requirements for brightness, animation, and message duration. Grand Ledge has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Grand Ledge Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Grand Ledge, Michigan sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Grand Ledge, Michigan Sign Rules at a Glance

Grand Ledge, Michigan regulates 19 sign types across 6 zoning districts. Ground Sign (Subdivision/Multiple Housing/Nursing Home/Convalescent/Adult Foster Facility)s in the R-LD, R-MD, R-HD, R-PC, MH, AG zoning district are capped at 6 ft tall and 32 sq ft, with a At least 10 ft from future road right-of-way setback (Sec. Sec. 46-622(b)). Most commercial signs in Grand Ledge require a permit.

Detailed Sign Ordinance Requirements for Grand Ledge, Michigan

Sign Rules by Zoning District in Grand Ledge (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones3
R-LD, R-MD, R-HD, R-PC, MH, AG56 ft50 sq ft
OS Office Service District26 ft20 sq ft
CBD Central Business District65 ft30 sq ft
B-1 Highway Service Districts425 ft100 sq ft per face
I-1 Industrial Districts, I-2 Industrial Districts410 ft100 sq ft per face

Zone-by-Zone Sign Requirements in Grand Ledge(sample of 3 of 6 zones)

R-LD, R-MD, R-HD, R-PC, MH, AG

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate Sign (Home Occupation/Professional Service)3 sq ft1Mounted flat against the wall of the principal buildingUnlockSec. 46-622(a)
Ground Sign (Subdivision/Multiple Housing/Nursing Home/Convalescent/Adult Foster Facility)6 ft32 sq ftAt least 10 ft from future road right-of-way1UnlockSec. 46-622(b)
Temporary Sign (New Residential Development)6 ft32 sq ftAt least 20 ft from future road right-of-way1UnlockSec. 46-622(c)
Sign (Nonresidential Uses: Hospital, Church, School, etc.)6 ft32 sq ftAt least 20 ft from future right-of-way1UnlockSec. 46-622(d) first sentence
Wall Sign (Nonresidential Uses: Hospital, Church, School, etc.)50 sq ft1Mounted flat against wall of principal buildingUnlockSec. 46-622(d) last sentence

CBD Central Business District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate Sign3 sq ft1 per entranceEach exterior building entranceUnlockSec. 46-624(a)
Wall Sign30 sq ft1Per buildingUnlockSec. 46-624(b)
Swinging Sign (Double-faced Overhanging)12 sq ft per face1 per entrancePer building entrance; innermost edge no more than 1 ft from wall, outermost edge no more than 4 ft from wall; 8 ft above ground/sidewalk or 15 ft if overhanging alleyUnlockSec. 46-624(c)
Sandwich Sign4 ft (main); insert may be up to 16 in above)6 sq ft per side (main body); 16 in high insert permitted2 ft1 per store frontOn sidewalk, adjacent to curb in brick paver section (or within 4 ft of curb if no brick); not within crosswalk; only allowed where sidewalk is at least 8 ft wide, must be in front of establishment using signUnlockSec. 46-624(f)
Ground Sign (Automobile Service Station)5 ft25 sq ft1At road right-of-way lineUnlockSec. 46-624(g)
Accessory Sign (Gasoline Pump)2 sq ft1 per pumpAffixed to each gasoline pumpUnlockSec. 46-624(h)

I-1 Industrial Districts, I-2 Industrial Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Ground Sign (On-premises)10 ft64 sq ft per face20 ft from future road right-of-way1 per lot; additional per conditionsEach zoning lot; additional on corner lot with at least 200 ft frontage per thoroughfare, or lot with frontage and access via 2 major thoroughfares (1 per thoroughfare)UnlockSec. 46-626(a)
Ground Sign (Industrial Park)10 ft100 sq ft per face20 ft from road right-of-way1Industrial parkUnlockSec. 46-626(b)
Wall Sign1 per facade with road frontageOne per building facade with road frontageUnlockSec. 46-626(c)
Nonaccessory Sign (I-2)10 ft up to 20 ft (based on setback)100 sq ft up to 300 sq ft (based on setback)Minimum 25 ft; area/height increase with additional setbackI-2 Districts onlyUnlockSec. 46-626(d)

PermitPal covers all 6 zoning districts in Grand Ledge — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 6 zones for Grand Ledge — start free

Prohibited Signs in Grand Ledge

  • Festoon signs are not permitted in any use district.
  • Flashing, animated, or moving signs are not permitted in any use district.
  • Projecting signs are not permitted in any use district.
  • Snipe signs are not permitted in any use district.
  • Vehicle business signs are not permitted in any use district.
  • Roof-mounted signs are not permitted in any use district.
  • Portable signs are not permitted in any use district.
  • Temporary signs are not permitted in any use district unless otherwise provided by this chapter.
  • No sign shall be located in, project into, or overhang a public right-of-way or dedicated public easement, except for signs erected by the city, county, state, or federal governments, and signs located in the CBD District.
  • Signs mounted on a building shall not project beyond or overhang the wall by more than 12 inches, except for permitted swinging signs.
  • Signs shall not project above the cornice, wall facade, parapet, or eave of the building to which it is affixed.
  • No sign shall be erected which simulates or imitates in size, color, lettering, or design any traffic sign or signal, or other word, phrase, symbol, or character in such a manner as to interfere with, mislead, or confuse traffic.

Exempt Signs in Grand Ledge

  • Real estate signs advertising premises for sale, rent, or lease, when not more than six square feet in area and not more than 42 inches in height for a single dwelling or building or vacant land. Such signs must be placed at least 15 feet from a road right-of-way or property line.
  • Real estate signs in commercial areas not exceeding 15 square feet in surface display area per face, nor exceeding ten feet in height, and if freestanding, set back at least 25 feet from the nearest edge of existing pavement.
  • Seasonal decorations and community event signs which advertise public entertainment or events of public interest, not exceeding ten square feet in area and displayed for not more than 21 days before and seven days after the event.
  • Real estate directional signs not exceeding six square feet in area per sign face, allowed off premises only from 9:00 a.m. to 9:00 p.m. on the day of the open house and only for three consecutive days and for three days each week, with a height not exceeding 42 inches. Subject to property owner permission.
  • Signs erected by the city, county, state, or federal governments for street direction or traffic control.
  • Signs not exceeding one square foot in area and bearing only property numbers, post box numbers, names of occupants or premises, or other identification of premises.
  • Accessory on-site directional signs of not more than two square feet each.
  • Political signs not exceeding six square feet in area per face and not more than 3.5 feet in height, provided they are removed within ten days after the election and not displayed within public right-of-way or on other public lands.
  • Flags, not more than three per zoning lot and not more than four feet by six feet.
  • Legal notices, identification, or informational signs erected or required by governmental bodies.
  • Signs or markers from a state or federal agency identifying the premises as a state historical site or listed in the National Register of Historic Places.
  • Signs advertising garage sales, yard sales, etc.

Sign Plan & Submission Notes for Grand Ledge

  • The zoning administrator may require review by the planning commission in all instances.
  • Applicants have the right to appeal any decision of the city administration or Downtown Development Authority (DDA) to the zoning board of appeals in conformance with article XXII.
  • All signs for which a permit is required and all supports therefor shall be kept in compliance with the plans and specifications filed and approved for issuance of the sign permit.
  • For sandwich signs in the CBD District, a permit application must include a schematic sketch of the proposed sign, including proposed dimensions, colors, and materials.

Source: municode municipal code