Questions? Call us at (262) 218-2915

Sign Regulations in Roseville, Michigan

Roseville, Michigan has specific sign regulations covering 18 sign types across 14 zoning districts. Regulated sign types include Subdivision Entrance Sign, Freestanding Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 21, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Roseville, Michigan

Sample Sign Requirements in Roseville

Sign TypeMax HeightMax AreaSetback
Freestanding Sign25 ft at minimum setback, plus 1 ft per additional 2 ft setback, up to 45 ft max100 sq. ft.Must be at setback line
Wall SignNot listed15% of building facade area, 150 sq. ft. maxNot listed
Projecting SignNot listed20 sq. ft.Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RosevilleFull Coverage

Sign Types Covered

18

  • Subdivision Entrance Sign
  • Freestanding Sign
  • Wall Sign
  • Projecting Sign
  • +2 more types

Zoning Districts

14

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Roseville

Municipal Code3 permit application links available

Frequently Asked Questions

In Roseville, the height limit for Freestanding Sign in the Light Industrial District is 40 ft at minimum setback, plus 1 ft per additional 2 ft setback, up to 60 ft max (Sec. 264-6A(2)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Roseville require a permit. From the submission notes on this page: Permits are required before any person erects, alters, repairs, relocates or maintains a sign unless otherwise provided in the ordinance (§ 264-10). The application must include detailed plans and specifications, method of construction and attachment, and other information as required by the Building Director. Run a code check for an exact address to see the permit requirements for that zone.

Roseville's sign code covers 18 sign types, including Subdivision Entrance Sign, Freestanding Sign, Wall Sign, and Projecting Sign. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Time-and-temperature display signs (permit required, but generally permitted). The full list is on this page.

This page doesn't list a single setback distance for signs in Roseville. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Roseville's sign ordinance that cover digital, changing, or flashing signs: Signs which incorporate in any manner any flashing or moving lights. Government buildings and education facilities are exempt from certain requirements related to changeable LED message signs (specifically § 264-6F(1)(b)). Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Roseville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Roseville, Michigan, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Roseville, Michigan Sign Rules at a Glance

Roseville, Michigan regulates 18 sign types across 14 zoning districts. Subdivision Entrance Signs in the Light Industrial District are capped at 20 ft tall and 100 sq ft (Sec. 264-7H(5)). Most commercial signs in Roseville require a permit.

Detailed Sign Ordinance Requirements for Roseville, Michigan

Sign Rules by Zoning District in Roseville (14 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Local Business District, Community Business District, General Business District525 ft at minimum setback, plus 1 ft per additional 2 ft setback, up to 45 ft max200 sq. ft.Not listed
Light Industrial District540 ft at minimum setback, plus 1 ft per additional 2 ft setback, up to 60 ft max200 sq. ft.Not listed
General Industrial District540 ft at minimum setback, plus 1 ft per additional 2 ft setback, up to 60 ft max200 sq. ft.Not listed
Multiple-Family Residential (Low Rise) District210 ft.50 sq. ft.Not listed
Multiple-Family Residential (High Rise) District110 ft.50 sq. ft.Not listed
Office Service District425 ft.150 sq. ft.Not listed
DDA District14 ft.6 sq. ft.Not listed
Industrial Districts310 ft (from part of roof immediately below the sign)200 sq. ft.Not listed
One-Family Residential and Two-Family Residential Districts25 ft.10 sq. ft.Not listed
Multiple-Family Residential District, Multiple Residential Districts210 ft.50 sq. ft.Not listed
Residential District (R-1, R-1A, R-2, RM-1, RM-2)2Not listed4 sq. ft.Not listed
Sign Overlay Zone1Not listedNot listedNot listed
Commercial and Office Districts1Not listedNot listedNot listed
General Regulations For All Zones95 ft.32 sq. ft. for temporary use; see also promotional sign restrictionsNot listed

Zone-by-Zone Sign Requirements in Roseville(sample of 3 of 14 zones)

Local Business District, Community Business District, General Business District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign25 ft at minimum setback, plus 1 ft per additional 2 ft setback, up to 45 ft max100 sq. ft.Not listedMust be at setback lineOne per 300 feet business frontageBusiness frontage; must not extend over public right-of-wayNot listedUnlock§ 264-6A(1)
Wall SignNot listed15% of building facade area, 150 sq. ft. maxNot listedNot listedNo limitOn building facade; not beyond top or ends of wall surface; max projection 18 in.Not listedUnlock§ 264-6B(2)
Projecting SignNot listed20 sq. ft.Not listedNot listedOne per eligible advertiserOn building; min. 9 ft clearance above ground; max projection 5 ft from face of building; may extend up to 3 ft over right-of-way if frontage <5 ft from property lineNot listedUnlock§ 264-6C(2)
Roof Sign10 ft (from part of roof immediately below the sign)200 sq. ft.Not listedNot listedOne per eligible advertiserWholly within the roof area of the structureNot listedUnlock§ 264-6D(1)
Subdivision Entrance Sign15 ft.75 sq. ft.Not listedNot listedOne per street bordering or entering the subdivisionOne sign per street bordering or entering subdivisionNot listedUnlock§ 264-7H(4)

Light Industrial District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign40 ft at minimum setback, plus 1 ft per additional 2 ft setback, up to 60 ft max150 sq. ft.Not listedMust be at setback lineOneOn premises; must not extend over public right-of-wayNot listedUnlock§ 264-6A(2)
Wall SignNot listed200 sq. ft.Not listedNot listedNo limitOn building facade; not beyond top or ends of wall surface; projection max 18 in.Not listedUnlock§ 264-6B(3)
Projecting SignNot listed30 sq. ft.Not listedNot listedOne per eligible advertiserOn building; min. 9 ft clearance above ground; max projection 5 ft from building; may extend up to 3 ft over right-of-way if frontage <5 ft from property lineNot listedUnlock§ 264-6C(3)
Roof Sign10 ft. (from part of roof immediately below the sign)200 sq. ft.Not listedNot listedOne per eligible advertiserWholly within the roof area of the structureNot listedUnlock§ 264-6D(2)
Subdivision Entrance Sign20 ft.100 sq. ft.Not listedNot listedOne per street bordering or entering the subdivisionOne per street bordering or entering the subdivisionNot listedUnlock§ 264-7H(5)

General Industrial District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign40 ft at minimum setback, plus 1 ft per additional 2 ft setback, up to 60 ft max200 sq. ft.Not listedMust be at setback lineOneOn premises; must not extend over public right-of-wayNot listedUnlock§ 264-6A(3)
Wall SignNot listed200 sq. ft.Not listedNot listedNo limitOn building facade; not beyond the top or ends of the wall surface; projection max 18 in.Not listedUnlock§ 264-6B(3)
Projecting SignNot listed30 sq. ft.Not listedNot listedOne per eligible advertiserOn building; min. 9 ft clearance above ground; max projection 5 ft from building; may extend up to 3 ft over right-of-way if frontage <5 ft from property lineNot listedUnlock§ 264-6C(3)
Roof Sign10 ft. (from part of roof immediately below the sign)200 sq. ft.Not listedNot listedOne per eligible advertiserWholly within the roof area of the structureNot listedUnlock§ 264-6D(2)
Subdivision Entrance Sign20 ft.100 sq. ft.Not listedNot listedOne per street bordering or entering the subdivisionOne per street bordering or entering the subdivisionNot listedUnlock§ 264-7H(5)

PermitPal covers all 14 zoning districts in Roseville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Roseville

  • A sign not expressly permitted is prohibited.
  • Signs which incorporate in any manner any flashing or moving lights.
  • Banners, pennants, spinners and streamers, except as permitted in § 264-7.
  • String lights used in connection with commercial premises for commercial purposes, other than holiday decorations.
  • Any sign which has any visible moving part, visible revolving parts or visible mechanical movement of any description or other apparent visible movement achieved by electrical, electronic or mechanical means, including intermittent electrical pulsations or by action of normal wind currents, but automatic change-of-message with cycle time of not less than 30 seconds is permissible.
  • Any sign or sign structure which is structurally unsafe or which constitutes a hazard to safety or health by reason of inadequate maintenance, dilapidation or abandonment or which is not kept in good repair or which is capable of causing electrical shocks to persons likely to come in contact with it.
  • Any sign which, by reason of its size, location, content, coloring or manner of illumination, constitutes a traffic hazard or detriment to traffic safety by obstructing the vision of drivers or by obstructing or detracting from the visibility of any traffic sign or control device on public streets and roads.
  • Any sign which obstructs free ingress or egress from a required door, window, fire escape or other required exitway.
  • Signs which make use of words such as 'Stop', 'Look' or 'Danger' or any characters or shapes generally used as public safety symbols or other words, phrases, symbols or characters in such a manner as to interfere with, mislead or confuse traffic.
  • Any sign or other advertising structure containing any obscene, indecent or immoral matter.
  • Any sign unlawfully installed, erected or maintained.
  • Any sign now or hereafter existing which no longer advertises a bona fide business conducted or a product sold.
  • Portable signs.
  • Bench signs, whether such benches are permanent or portable, which are prohibited where benches are located outside of a fully enclosed structure.
  • No person shall erect or cause to be erected any sign whatever on any public lands or highways or roads adjacent to a park.
  • It shall be unlawful for any person to erect, construct, maintain, enlarge, alter, move or convert any sign in the City of Roseville or cause or permit the same to be done contrary to or in violation of any of the provisions of this chapter.

Exempt Signs in Roseville

  • House or building address sign.
  • Flags bearing the official sign of a nation, state, municipality or educational institution, provided they comply with the zoning ordinance.
  • Private traffic direction signs and related signs.
  • Time-and-temperature display signs (permit required, but generally permitted).
  • Underground public utility warning signs.
  • Marquee advertising, provided that said advertising is wholly contained within the basic marquee face.
  • Signs painted on or attached to vehicles which are normally used upon highways, provided the vehicle is not parked with the principal purpose of advertising a business or activity conducted on nearby private property.
  • Temporary signs, banners and pennants approved by the Building Director in conjunction with an event approved under Chapter 248.
  • Residential window signs: One sign may be displayed in the window of a dwelling in a residentially zoned area (not exceeding four square feet and not advertising a home occupation unless approved).
  • Servicing and maintenance: Changing of advertising on a sign specifically designed for the periodic change of the message without change in sign structure (e.g., bulletin boards) does not require a permit.
  • Government buildings and education facilities are exempt from certain requirements related to changeable LED message signs (specifically § 264-6F(1)(b)).

Sign Plan & Submission Notes for Roseville

  • A site plan showing the location of a proposed A-frame sign, as well as colored elevations representing size, dimensions and the graphic design of the sign, must be presented along with the applicable permit fee for A-frame signs in the DDA District. Permits shall be for one year from the date of issue.
  • Permits are required before any person erects, alters, repairs, relocates or maintains a sign unless otherwise provided in the ordinance (§ 264-10). The application must include detailed plans and specifications, method of construction and attachment, and other information as required by the Building Director.
  • Signs must conform to the standards of the Roseville Sign Ordinance, Chapter 264, as referenced in the zoning code and overlay zone (§ 370-108, § 370-57).
  • A variance from the strict application of the Sign Ordinance may only be granted by the Zoning Board of Appeals after a public hearing, with specific findings required (§ 264-15).

Source: ecode360 municipal code