Questions? Call us at (262) 218-2915

Sign Regulations in Albertville, Minnesota

Albertville, Minnesota has specific sign regulations covering 37 sign types across 7 zoning districts. Regulated sign types include Address Identification Sign, Temporary Freestanding Sign (Vacant Lot for Sale 2+ Acres), Campaign Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Albertville, Minnesota

Sample Sign Requirements in Albertville

Sign TypeMax HeightMax AreaSetback
Temporary Special Event Sign5 ft4 sq ftNot listed
Address Identification SignNot listed2 sq ftNot listed
Temporary Freestanding Sign (Property for Sale)5 ft4 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for AlbertvilleFull Coverage

Sign Types Covered

37

  • Address Identification Sign
  • Temporary Freestanding Sign (Vacant Lot for Sale 2+ Acres)
  • Campaign Sign
  • Temporary Special Event Sign
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Albertville, the height limit for Freestanding Pylon Sign (I-94 Adjacent Lot) in the B-2, B-2A, B-3, B-4, B-W zoning districts is 50 ft (Sec. 10-7-6(F)(2)d(1)). Maximum sign heights range from 8 ft to 50 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Albertville require a permit. From the submission notes on this page: Additional wall signs in certain business and institutional zoning districts may only be approved with submission and approval of a comprehensive sign plan. Run a code check for an exact address to see the permit requirements for that zone.

Albertville's sign code covers 37 sign types, including Address Identification Sign, Temporary Freestanding Sign (Vacant Lot for Sale 2+ Acres), Campaign Sign, and Temporary Special Event Sign. Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Signs of a duly constituted governmental body, including traffic or similar regulatory devices, legal notices, and warnings at railroad crossings, are exempt from permit requirements and from the regulations of this section. The full list is on this page.

This page doesn't list a single setback distance for signs in Albertville. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Albertville's sign ordinance that cover digital, changing, or flashing signs: Flashing signs, rotating or moving signs, animated signs, signs with moving lights, or signs creating the illusion of movement are prohibited in all zoning districts. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Albertville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Albertville, Minnesota, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Albertville, Minnesota Sign Rules at a Glance

Albertville, Minnesota regulates 37 sign types across 7 zoning districts. Ground Signs in the B-2, B-2A, B-3, B-4, B-W zoning districts are capped at 30 ft tall and 250 sq ft (Sec. 10-7-6(F)(2)). Most commercial signs in Albertville require a permit.

Detailed Sign Ordinance Requirements for Albertville, Minnesota

Sign Rules by Zoning District in Albertville (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
A-1, A-2, R-1A, R-1, R-2, R-398 ft50 sq ftNot listed
R-4, R-5, R-6, R-7, R-8, R-MH1210 ft100 sq ftNot listed
B-2, B-2A, B-3, B-4, B-W1450 ft250 sq ftNot listed
I-1, I-21030 ft200 sq ftNot listed
P/I108 ftUp to 160 sq ft (25+ acres)Not listed
Adjacent Area230 ft720 sq ft per face; max 15% extensionNot listed
General Regulations For All Zones2Not listedBanner: 32 sq ft; Portable: 48 sq ftNot listed

Zone-by-Zone Sign Requirements in Albertville(sample of 3 of 7 zones)

R-4, R-5, R-6, R-7, R-8, R-MH

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Special Event Sign5 ft (except wall sign)4 sq ftNot listedNot listed1 per street frontage1 per street frontage; not prior to 5 days before event; removed 1 day after event.Not listedUnlock10-7-6(C)(1)
Address Identification SignNot listed2 sq ftNot listedNot listed1 per dwelling unitPer dwelling unitNot listedUnlock10-7-6(C)(2)
Temporary Sign (Remodeling or Construction)8 ft32 sq ftNot listedNot listed1, or 2 on corner lotsOn property under construction/remodelingNot listedUnlock10-7-6(C)(3)
Temporary Freestanding Sign (Property for Sale or Rent)8 ft32 sq ftNot listedMust meet sign setback requirements1 per street frontagePer street frontage, while property is for sale/rentNot listedUnlock10-7-6(C)(4)
Temporary Freestanding Sign (Vacant Lot for Sale 2+ Acres)8 ft32 sq ftNot listedNot listed1 per adjacent street1 per adjacent street, not in public right of way.Not listedUnlock10-7-6(C)(5)
Freestanding Sign (Business Use)10 ft100 sq ftNot listedNot listed1 per businessNot listedNot listedUnlock10-7-6(D)(1)
Freestanding Sign (Multi-family/Condo/Cooperative Entrance)10 ft40 sq ftNot listedNot listed1 per site entrance1 per site entrance from streetNot listedUnlock10-7-6(D)(2b)
Subdivision Sign (20+ units)Not listed32 sq ftNot listedNot listed1 per public street access1 per public street access, on outlot, easement, or neighborhood association propertyNot listedUnlock10-7-6(D)(3)

B-2, B-2A, B-3, B-4, B-W

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address Identification SignNot listed2 sq ftNot listedNot listed1 per business unitPer business unitNot listedUnlock10-7-6(E)(1)
Temporary Sign (Remodeling or Construction)8 ft32 sq ftNot listedNot listed1, or 2 on corner lotsOn property under construction/remodelingNot listedUnlock10-7-6(E)(3)
Temporary Freestanding Sign (Vacant Lot for Sale 2+ Acres)8 ft32 sq ftNot listedMust meet sign setback requirements1 per adjacent street1 per adjacent street, not in public right of way.Not listedUnlock10-7-6(E)(4)
Temporary Freestanding Sign (Property for Sale or Rent)8 ft32 sq ftNot listedNot listed1 per propertyOn property while listed for sale/rentNot listedUnlock10-7-6(E)(5)
Ground Sign30 ft250 sq ftNot listedNot listed1 per lotOn lotNot listedUnlock10-7-6(F)(2)
Freestanding Pylon Sign (I-94 Adjacent Lot)50 ftNot listedNot listedNot listed1 per lotLots with 100 ft along I-94Not listedUnlock10-7-6(F)(2)d(1)
Freestanding Monument Sign (I-94 Adjacent Lot, Entrance)12 ft60 sq ftNot listedNot listed1 per site entranceAt site entranceNot listedUnlock10-7-6(F)(2)d(2)
Billboard (I-94 Adjacent Lot with Billboard Use)50 ftNot listedNot listedNot listed1 per lotLots with off premises advertising deviceNot listedUnlock10-7-6(F)(2)d(3)

P/I

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address Identification SignNot listed2 sq ftNot listedNot listed1 per business unitPer business unitNot listedUnlock10-7-6(I)(1)
Window Sign (w/out permit)Not listedNot listedNot listedNot listedNot listedPlaced inside buildingNot listedUnlock10-7-6(I)(2)
Temporary Sign (Remodeling/Construction)8 ft32 sq ftNot listedNot listed1, or 2 on corner lotsOn property under construction/remodelingNot listedUnlock10-7-6(I)(3)
Temporary Freestanding Sign (Vacant Lot for Sale 2+ Acres)8 ft32 sq ftNot listedMust meet sign setback requirements1 per adjacent street1 per adjacent street, not in public right of way, must meet sign setbackNot listedUnlock10-7-6(I)(4)
Temporary Wall or Freestanding Sign (Property for Sale or Rent)Freestanding: 8 ftFreestanding: 32 sq ftNot listedNot listed1 per propertyWhile for sale/rentNot listedUnlock10-7-6(I)(5)
Banner Sign (Central Park Playfield, Temporary)3 ft15 sq ft (3 ft high x 5 ft long)5 ftNot listedNumber/location determined on individual basisInternal to playfield, oriented toward playfieldNot listedUnlock10-7-6(I)(7)
Wall Sign (including Awning, Canopy, Projecting)Not listedNot listedNot listedNot listed2 per building wall fronting streetOn building or tenant bay facing street or as permittedNot listedUnlock10-7-6(J)(1)
Freestanding Sign8 ft (to 15 acres), 17.5 ft (15.1+ acres)Up to 160 sq ft (25+ acres)Not listedNot listed1 per site1 per siteNot listedUnlock10-7-6(J)(2)

PermitPal covers all 7 zoning districts in Albertville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Albertville

  • Flashing signs, rotating or moving signs, animated signs, signs with moving lights, or signs creating the illusion of movement are prohibited in all zoning districts.
  • Signs painted directly upon a wall surface are prohibited.
  • Signs which advertise a business not presently conducted on the premises are prohibited, except for permitted billboards and certain approved directional signs for large recreational establishments.
  • Signs that physically obstruct required accessways or windows in a manner that creates a safety hazard are prohibited.
  • Signs that may obstruct, impair, obscure, or interfere with traffic control signs, signals, or devices, or that may mislead or confuse traffic, are prohibited.
  • Signs attached to trees, shrubs, rocks, natural features, or public utility poles are prohibited.
  • Structurally unsafe signs, signs in disrepair, or abandoned signs are prohibited.
  • Roof signs located directly on a building roof or projecting over or from a building roof are prohibited.
  • Signs mounted on vehicles or trailers are prohibited, with the exception of trailer reader signs and permitted temporary portable signs.

Exempt Signs in Albertville

  • Signs of a duly constituted governmental body, including traffic or similar regulatory devices, legal notices, and warnings at railroad crossings, are exempt from permit requirements and from the regulations of this section.
  • Campaign signs are exempt from the provisions of this chapter per Minnesota state statute 211B.045.
  • Signs identified within the chapter as allowed without a permit are exempt from permit and fee requirements.
  • Pump operation instructions located on gas pumps at automobile service stations are exempt from sign requirements.

Sign Plan & Submission Notes for Albertville

  • A comprehensive sign plan (otherwise referred to as a master/comprehensive sign plan) is required for mixed use, commercial, and industrial multiple occupancy buildings, Planned Unit Development developments, or single occupancy buildings requesting more than two (2) signs.
  • Any building devoted to two (2) or more uses is considered a multiple occupancy building and requires a comprehensive sign plan.
  • No individual sign permit shall be issued for an individual use within a building requiring a comprehensive sign plan except upon a determination that it is consistent with a previously or concurrently approved comprehensive sign plan.
  • Additional wall signs in certain business and institutional zoning districts may only be approved with submission and approval of a comprehensive sign plan.
  • Approval of a comprehensive sign plan or amendments requires approval of an administrative permit.