Sign Regulations in Arden Hills, Minnesota
Arden Hills, Minnesota has specific sign regulations covering 21 sign types across 17 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Freestanding Sign (Monument Type). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 19, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Arden Hills, Minnesota
Sample Sign Requirements in Arden Hills
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign | Not listed | 4 sq. ft. | Not listed |
| Freestanding Sign | 4 ft. | 4 sq. ft. | At least 5 ft from any property line. |
| Freestanding Sign (Monument Type) | 8 ft. | 32 sq. ft. | At least 5 ft from property line. |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
21
- Wall Sign
- Freestanding Sign
- Freestanding Sign (Monument Type)
- Highway Monument Sign
- +2 more types
Zoning Districts
17
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Minnesota
Frequently Asked Questions
In Arden Hills, the height limit for Highway Monument Sign in the TRC (Traditional Residential Character, via Section 11.0+) zoning districts is 30 ft. Maximum sign heights range from 4 ft to 30 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Arden Hills require a permit. From the submission notes on this page: A complete set of plans drawn to scale showing necessary elevations, setbacks, size, and details to fully and clearly represent the construction and placement of the sign(s) is required for each permit application unless waived by the City Administrator or designee. Run a code check for an exact address to see the permit requirements for that zone.
Arden Hills's sign code covers 21 sign types, including Wall Sign, Freestanding Sign, Freestanding Sign (Monument Type), and Highway Monument Sign. Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: Governmental signs including, but not limited to, traffic control and other regulatory signs, street signs, identification signs, informational signs, danger signs, and railroad crossing signs are exempt from permit requirements. The full list is on this page.
In Arden Hills, Freestanding Sign in the Sign District 1 (R-1, R-2) must be set back at least 5 ft from any property line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Arden Hills's sign ordinance that cover digital, changing, or flashing signs: Dynamic display signs are prohibited in all sign districts, except as specifically provided in section 1240.04. Normal maintenance and repair do not require a permit, but re-facing (except the text on a manual changeable message sign), removing sign for cabinet repair, changes to size or illumination, or structural changes do require a permit. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Arden Hills Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Arden Hills, Minnesota, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Arden Hills, Minnesota Sign Rules at a Glance
Arden Hills, Minnesota regulates 21 sign types across 17 zoning districts. Freestanding Signs in the Sign District 1 (R-1, R-2) are capped at 4 ft tall and 4 sq ft, set back at least 5 ft from any property line. Most commercial signs in Arden Hills require a permit.
Detailed Sign Ordinance Requirements for Arden Hills, Minnesota
Sign Rules by Zoning District in Arden Hills (17 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Sign District 1 (R-1, R-2) | 2 | 4 ft. | 4 sq. ft. | Not listed |
| Sign District 2 (Non-residential uses in R-1, R-2, R-3, R-4) | 2 | 6 ft. | 32 sq. ft. | Not listed |
| Sign District 3 (R-3, R-4) | 2 | 4 ft. | 6 sq. ft. (per sign), 8 sq. ft. aggregate | Not listed |
| Sign District 4 (Properties fronting on County Road E east of Highway 51 except those with frontage on Lexington Avenue) | 2 | 8 ft. | 100 sq. ft. | Not listed |
| Sign District 5 (Properties fronting on Lexington Avenue South of Interstate 694) | 2 | 8 ft. | 100 sq. ft. | Not listed |
| Sign District 6 (Commercial or industrial use fronting on Lexington Avenue north of Interstate 694, Highway 96, and B-1) | 2 | 16 ft. | 150 sq. ft. | Not listed |
| Sign District 7 (I-Flex, Gateway Business, or other commercial or industrial district without specified frontage) | 2 | 8 ft. | 100 sq. ft. | Not listed |
| Sign District 8 (Neighborhood Business) | 2 | 6 ft. | 64 sq. ft. | Not listed |
| Sign District 9 (Parts of the TCAAP area not fronting on Highway 96) | 2 | 16 ft. | 150 sq. ft. | Not listed |
| TRC (Traditional Residential Character, via Section 11.0+) | 17 | 30 ft. | 400 sq. ft. (total cumulative all surfaces) | Not listed |
| General Regulations For All Zones | 1 | 8 ft. | 40 sq. ft. (total per lane) | Not listed |
| Start free to see 6 more zones | ||||
Zone-by-Zone Sign Requirements in Arden Hills(sample of 3 of 17 zones)
Sign District 1 (R-1, R-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 4 sq. ft. | Not listed | Not listed | 1 per dwelling | On the residence. | Not listed | Unlock | Section 1240, Table 1240.02 - Sign District 1 |
| Freestanding Sign | 4 ft. | 4 sq. ft. | Not listed | At least 5 ft from any property line. | 1 per dwelling | Front yard, at least 5 ft from any property line. | Not listed | Unlock | Section 1230.01 Subd. 4; Section 1240, Table 1240.02 - Sign District 1 |
Sign District 2 (Non-residential uses in R-1, R-2, R-3, R-4)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 32 sq. ft. | Not listed | Not listed | 1 per use | On principal building. | Not listed | Unlock | Section 1240, Table 1240.02 - Sign District 2 |
| Freestanding Sign | 6 ft. | 16 sq. ft. | Not listed | At least 5 ft from property line. | 1 per site | Front yard, at least 5 ft from property line. | Not listed | Unlock | Section 1240, Table 1240.02 - Sign District 2 |
TRC (Traditional Residential Character, via Section 11.0+)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Highway Monument Sign | 30 ft. | 400 sq. ft. (total cumulative all surfaces) | Not listed | Not listed | 1 per 1,000 ft frontage; max 2 | Within 60 ft of I-35W or Hwy 10. | Not listed | Unlock | Section 11.4, Table 11-1, TRC Code |
| Corridor Monument Sign | 12 ft. | 150 sq. ft. (multi-tenant) | Not listed | Not listed | 1 per lot (2 for frontage >700 ft/corner) | As per permitted zoning. | Not listed | Unlock | Section 11.5, Table 11-1, TRC Code |
| Building Identity Sign (I-35W, Hwy 10, MN-96) | Not listed | 200 sq. ft. or 15% façade | Not listed | Not listed | 1 per building | Upper façade, single tenant buildings | Not listed | Unlock | Section 11.6(a), Table 11-1, TRC Code |
| Building Identity Sign (Other Frontages) | Not listed | 150 sq. ft. or 10% façade | Not listed | Not listed | 1 per building | Upper façade, single tenant buildings | Not listed | Unlock | Section 11.6(b), Table 11-1, TRC Code |
| Storefront/Tenant Wall Sign (I-35W, Hwy 10, MN-96) | Mounted below 25 ft from finished grade | 150 sq. ft. | Not listed | Not listed | 1 per tenant space | Ground floor façade of multi-tenant buildings | Not listed | Unlock | Section 11.7(a), Table 11-1, TRC Code |
| Storefront/Tenant Wall Sign (Other frontages) | Mounted below 25 ft from finished grade | 100 sq. ft. | Not listed | Not listed | 1 per tenant space | Ground floor façade of multi-tenant buildings | Not listed | Unlock | Section 11.7(b), Table 11-1, TRC Code |
| Directional Sign | 8 ft. | 60 sq. ft. | Not listed | Not listed | 1 per entrance, max 2 per frontage | At lot entrance from public street | Not listed | Unlock | Section 11.12, Table 11-1, TRC Code |
| Sandwich Board and Mounted Menu Sign | 4 ft. | 8 sq. ft./face | Not listed | Not listed | 1 per storefront | On sidewalk adjacent storefront | Not listed | Unlock | Section 11.14, Table 11-1, TRC Code |
PermitPal covers all 17 zoning districts in Arden Hills. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Arden Hills
- Signs with moving, swinging, revolving, or rotating parts are prohibited in all sign districts.
- Dynamic display signs are prohibited in all sign districts, except as specifically provided in section 1240.04.
- Roof signs are prohibited in all sign districts.
- Projecting signs are prohibited in all sign districts.
- Any sign not constructed, wired, assembled, attached, or supported in conformance with applicable building or other codes and regulations is prohibited.
- Signs in the public right-of-way are prohibited, except as provided in Section 1250.03, by Minnesota Statutes, or allowed by the agency regulating the right-of-way.
- Signs attached to public utility poles, trees, street signs, stoplights, or fences are prohibited.
- Permanent outdoor advertising signs, including billboards, are prohibited.
- Portable signs are prohibited, except portable A-frame, T-frame, sandwich, or other similar signs that do not exceed six (6) square feet in size.
- Signs located in the clear vision area are prohibited.
- Signs imitating traffic control signs are prohibited, except those used to control traffic on private property.
- Any sign, sign type, sign lighting, or sign technology not specifically listed as permitted in this Chapter is prohibited.
Exempt Signs in Arden Hills
- Governmental signs including, but not limited to, traffic control and other regulatory signs, street signs, identification signs, informational signs, danger signs, and railroad crossing signs are exempt from permit requirements.
- Non-commercial signs in an election year may be posted no more than 70 days prior to an election and must be removed within 10 days after.
- Address identification signs not exceeding four (4) square feet for each structure or portion of a structure with an assigned address are exempt.
- Exempt residential signs: Properties in Sign Districts 1 and 3 may have up to eight (8) square feet of signage, with no individual sign larger than six (6) square feet, not illuminated, and freestanding signs must be at least five (5) feet from any property line.
- Temporary off-premise signs as designated in Section 1250.03 are exempt.
- Portable A-frame, T-frame, sandwich, or other similar signs (max 6 sq. ft., non-illuminated, within 15 feet of primary building entrance, displayed only during business hours, no more than two at once) are exempt.
- Incidental signs or signs within a building that are not readily visible from the public right-of-way, adjacent properties, and are not illuminated are exempt.
- Window signs that are inside of a building shall not require a permit but must comply with Section 1240.02 Table 1.
- Any sign under this section may display any lawful non-commercial message that does not direct attention to a business operated for profit and complies with size, height, and lighting requirements.
Sign Plan & Submission Notes for Arden Hills
- No person, property owner, lessee shall place, erect, alter, modify, enhance, or change in any way a sign that does not conform to the requirements of this Chapter and all other applicable regulations.
- Except for those signs listed in Section 1230.01 (exemptions), no sign shall be erected, altered, reconstructed, maintained, moved, or enhanced in the City without obtaining a sign permit from the City.
- A complete set of plans drawn to scale showing necessary elevations, setbacks, size, and details to fully and clearly represent the construction and placement of the sign(s) is required for each permit application unless waived by the City Administrator or designee.
- Normal maintenance and repair do not require a permit, but re-facing (except the text on a manual changeable message sign), removing sign for cabinet repair, changes to size or illumination, or structural changes do require a permit.
- Sign standard adjustments (variances for height, number, type, lighting, area, and/or location) may be approved with a Site Plan Review or a Planned Unit Development process as described in Section 1320 and 1355 of the Zoning Code. Dynamic display signage cannot be permitted via this process.
- Permanent scoreboard or athletic field signs visible from outside require sign permit approval per special provisions of 1250.05 and 1250.06.
- Where a new group massing of temporary banner signage (at athletic fields under 1250.04) is requested, a sign permit is required.
- If the applicant is not the property owner, written permission from the property owner must be provided prior to approval of the permit.
- Signs on interior of lot and not intended to be viewed or utilized by traffic on public streets do not require a permit.