Questions? Call us at (262) 218-2915

Sign Regulations in Braham, Minnesota

Braham, Minnesota has specific sign regulations covering 32 sign types across 10 zoning districts. Regulated sign types include Freestanding Sign, Area Identification Sign (Subdivision Entry), Institutional Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Braham, Minnesota

Sample Sign Requirements in Braham

Sign TypeMax HeightMax AreaSetback
Freestanding SignNot listedNot listedSigns must conform to building setback regulations for the zoning district unless otherwise specified.
Wall Sign - GeneralNot listed4 sq ftNot listed
Freestanding Sign - GeneralNot listed4 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BrahamFull Coverage

Sign Types Covered

32

  • Freestanding Sign
  • Area Identification Sign (Subdivision Entry)
  • Institutional Sign
  • Wall Sign
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Braham, the height limit for Pylon Sign in the Central Business District (CBD), General Business District (GB, GBD) is 35 ft (Sec. 154.327(C)(2)). Maximum sign heights range from 35 ft to 42 in across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Braham require a permit. From the submission notes on this page: Permit application must include a complete description of the sign, a sketch of size, construction, and installation details; city may request two blueprints or ink drawings of plans/specifications as deemed necessary. Run a code check for an exact address to see the permit requirements for that zone.

Braham's sign code covers 32 sign types, including Freestanding Sign, Area Identification Sign (Subdivision Entry), Institutional Sign, and Wall Sign. Most commercial signs need a permit. The ordinance lists 15 exemptions. One of them: Lighter than air, inflatable devices, and/or a balloon designed and utilized primarily to draw attention, allowing less than three square feet without a permit. The full list is on this page.

In Braham, Canopy/Marquee/Awning Sign in the Central Business District (CBD), General Business District (GB, GBD) must be set back 3 ft from curbline. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Braham's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Braham Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Braham, Minnesota, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Braham, Minnesota Sign Rules at a Glance

Braham, Minnesota regulates 32 sign types across 10 zoning districts. Sandwich Board Signs in the Central Business District (CBD), General Business District (GB, GBD) are capped at 42 in tall and 9 sq ft per side (Sec. 154.326(D)(3)). Most commercial signs in Braham require a permit.

Detailed Sign Ordinance Requirements for Braham, Minnesota

Sign Rules by Zoning District in Braham (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones4Not listedNot listedNot listed
R-14Not listed40 sq ftNot listed
R-24Not listed32 sq ft (total per entry, max 2 entries, max 70% of total sign area in any one sign)Not listed
R-32Not listed20 sq ft (total per entry, max 2 entries, max 70% of total sign area in any one sign)Not listed
Residential Districts (R-1, R-2, R-3)1Not listed12 sq ftNot listed
Central Business District (CBD), General Business District (GB, GBD)1442 in300 sq ftNot listed
Industrial District (I-1, I-2)435 ft200 sq ft (individual)Not listed
Subdivision, Planned Unit Development (PUD)1Not listed40 sq ft (per R-1); larger size not specified for R-2/R-3)Not listed
City Park Zoning Districts2Not listedNot listedNot listed
Freedom Park3Not listedTotal of all banners not to exceed 120 sq ftNot listed

Zone-by-Zone Sign Requirements in Braham(sample of 3 of 10 zones)

R-1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign - GeneralNot listed4 sq ftNot listedNot listed1 per premisesOn buildingNot listedUnlock§ 154.327(A)(1), § 154.328(A)
Freestanding Sign - GeneralNot listed4 sq ftNot listedNot listed1 per premisesNot listedNot listedUnlock§ 154.327(A)(1), § 154.328(A)
Institutional SignNot listed40 sq ftNot listedNot listedNot listedNot listedNot listedUnlock§ 154.327(A)(1), § 154.328(A)
Area Identification Sign (Subdivision Entry)Not listed40 sq ftNot listedNot listedNot listedLocation must be identified on preliminary platsNot listedUnlock§ 154.327(A)(1), § 154.326(B)

R-2

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Identification Sign (Duplex/Triplex)Not listed2 sq ftNot listedNot listed1 per duplex/triplexNot listedNot listedUnlock§ 154.327(A)(2), § 154.325(D)
Identification Sign (Dwellings/Complexes, 4-20 Units)Not listed20 sq ft (total per entry, max 2 entries, max 70% of total sign area in any one sign)Not listedNot listedMax 2 per complexAt each entryNot listedUnlock§ 154.327(A)(2), § 154.325(D), § 154.328(A)
Identification Sign (Dwellings/Complexes, 21+ Units)Not listed32 sq ft (total per entry, max 2 entries, max 70% of total sign area in any one sign)Not listedNot listedMax 2 per complexAt each entryNot listedUnlock§ 154.327(A)(2), § 154.325(D), § 154.328(A)
Area Identification Sign (Subdivision Entry)Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 154.326(B)

Central Business District (CBD), General Business District (GB, GBD)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed100 sq ft (individual sign), 200 sq ft (max combined advertising surface), GBD: 700 sq ft max allowable sign areaNot listedNot listedMax 2 per principal building; more if separate principal wall frontagesOn building wallsNot listedUnlock§ 154.327(B)(1,2,3,4),(C)
Pylon Sign35 ftGBD: 200 sq ft/face, max 2 facesNot listedNot listed1 per establishmentNot listedNot listedUnlock§ 154.327(C)(2)
Shopping Center Identification Sign35 ft300 sq ftNot listedNot listed1 per arterial street abuttingAdjacent to major entrancesNot listedUnlock§ 154.327(C)(3), § 154.323(J)
Canopy/Marquee/Awning SignMaximum protrusion 12 inches; not exceed 12 inches in heightNot listedNot listed3 ft from curbline1 per establishmentSetback 3 feet from curblineNot listedUnlock§ 154.323(B),(J), § 154.326(C)(4)
Sandwich Board Sign42 in9 sq ft per sideNot listedNot listed1 per businessAdjacent to business, edge of sidewalks next to building, not more than 6 feet from primary entranceNot listedUnlock§ 154.326(D)(3)
Temporary Portable SignNot listedNot listedNot listedNot listed1 per propertyNot listedNot listedUnlock§ 154.325(B)
Banner/Pennant/Holiday Sign or DisplayNot listed45 sq ft (total)Not listedNot listedNot listedAffixed to building or structureNot listedUnlock§ 154.325(E)
Billboard35 ft200 sq ft (max sign area), GBD: no more than 35 ft highNot listedNot listedNot listedNot listedNot listedUnlock§ 154.327(C)(4)

PermitPal covers all 10 zoning districts in Braham. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Braham

  • It is unlawful to erect, maintain, repair, alter, or relocate any sign without first obtaining a permit except as otherwise provided.
  • Any sign which purports to be, or resembles, an official traffic control device, sign, or signal, or railroad sign or signal, or which hides from view, or interferes in any material degree, with the effectiveness of any traffic control device, sign, or signal, or railroad sign or signal, or which obstructs or interferes with the driver’s or pedestrian’s view of approaching, merging, or intersecting traffic for a distance not to exceed 500 feet.
  • Signs which resemble any official marker erected by a governmental agency, or which display words such as 'Stop' or 'Danger'.
  • Roof signs are prohibited.
  • Signs which contain statements, words, or pictures of an obscene, indecent, or immoral character, or that would offend public morals or decency on any right-of-way in the city limits, except as otherwise provided by law.
  • Any sign on private land without the written consent of the owner thereof.
  • Signs which are structurally unsafe, in disrepair, or are abandoned.
  • If a sign is not allowed as permitted in a specific zone, it is prohibited, and no special use permit or variance is available.
  • Signs which become unsafe, in a state of disrepair, insecure, or a menace to the public must be repaired or removed following written notice from the city.
  • The ground around any sign must be kept free of weeds and litter.
  • All permanent signs must comply with the maintenance sections of the State Building Code.
  • When electrical signs are installed, the installation must be subject to the State Building Code.
  • Signs must conform to the building setback regulations for the zoning district in which they are located, except as otherwise specified.
  • Signs located over public or private access routes must be located a minimum of eight feet over walking surfaces and 17 feet four inches over vehicle-related access routes.
  • Any sign now or hereafter existing which no longer advertises or identifies a bona fide business conducted, or a service rendered, or a product sold, shall be removed by the owner, agent, or person having the beneficial use/control of the building or structure upon which the signs may be found, within 10 days after written notice from the city.
  • The top edge of a wall sign shall not extend above the main level of the roof, except for mansard roofs, where it shall not exceed the height of the mansard.
  • Permanent pylon or permanent freestanding signs are limited to one per commercial establishment, except shopping centers.
  • Signs are allowable only as an accessory use except where prohibited.
  • All height restrictions on signs include the height of the sign structure, measured from the nearest finished grade.
  • Billboards cannot be erected on the roof of any building.
  • Billboards may not be a principal use of the property.

Exempt Signs in Braham

  • Campaign signs, provided they are removed ten days after an election and placed with permission of the property owner or lessee.
  • Directional signs located on, above, or beside entrances or exits to buildings or driveways which direct pedestrians (e.g., 'Employee’s Entrance', 'Exit Only', or 'Rest Rooms'), provided such signs are no more than four square feet in area.
  • Temporary signs denoting the architect, engineer, or contractor when placed upon work under construction, provided each sign is not more than 16 square feet in area and removed upon completion of construction; confined to the site, not erected before issuance of a building permit, and removed within two years or upon project completion.
  • Integral signs.
  • Holiday signs.
  • Real estate sale or rental signs, subject to removal within 14 days of closing or rental, size limitations, and number limitations per premises.
  • Individual property sale or rental signs, subject to same removal, size, and location limitations as real estate signs.
  • Flag of any state or nation not exceeding 80 square feet.
  • Rummage/garage sale signs.
  • Institutional sign up to 50 square feet.
  • Signs located inside an enclosed building and visible through a window.
  • Lighter than air, inflatable devices, and/or a balloon designed and utilized primarily to draw attention, allowing less than three square feet without a permit.
  • Memorial signs or tablets, names of buildings and date of erection when cut into masonry or constructed of bronze or other non-combustible material and attached to the building.
  • Artificially lit roofs or walls, or portions thereof.
  • Wellhead protection signs within the designated area as recommended by the Wellhead Protection Program.

Sign Plan & Submission Notes for Braham

  • Permit application must include a complete description of the sign, a sketch of size, construction, and installation details; city may request two blueprints or ink drawings of plans/specifications as deemed necessary.
  • Application for billboards must show location of building and structures, and lighting details.
  • The city may waive requirements for technical information in the application when not necessary for compliance determination.
  • If a sign authorized by permit has not been installed within six months after issuance, the permit becomes null and void.
  • In residential subdivision area identification signs, the location must be identified on preliminary plats; for subdivisions, see applicable code for permitting requirements.
  • Sandwich board signs require submission of a sketch including dimensions, content, materials, and location; must be approved and signed by city staff prior to display.
  • Appeals of sign permit decisions may be made by filing a letter of appeal requesting a hearing before the Planning Commission and City Council; the City Council decides all appeals.
  • A conditional use permit (CUP) is required for sign size requests in the CBD or GBD Districts that exceed maximum permitted sizes; written permission from adjacent property owners and compliance with safety/other criteria are required.