Sign Regulations in Excelsior, Minnesota
Excelsior, Minnesota has specific sign regulations covering 20 sign types across 5 zoning districts. Regulated sign types include Freestanding Sign, Projecting Sign, Awning or Canopy Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Excelsior, Minnesota
Sample Sign Requirements in Excelsior
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign | Not listed | Not listed | Must comply with Appendix E setback requirements if not attached to a principal structure. |
| Sandwich Board Sign (Portable Sign) | 5 feet | 6 square feet per side | Not listed |
| Dwelling Sign | Not listed | 2 square feet per surface | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
20
- Freestanding Sign
- Projecting Sign
- Awning or Canopy Sign
- Wall Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Excelsior
Other Cities in Minnesota
Frequently Asked Questions
In Excelsior, the height limit for Monument Sign (Other Nonresidential Uses) in the Residential District (R districts) is 8 feet (Sec. 24-8(c)). Maximum sign heights range from 5 feet to 8 inches across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Excelsior require a permit. From the submission notes on this page: A comprehensive sign plan application must include a site plan, tables/calculations of allowable sign areas and frontages, sign location/orientation, and potentially color/material/illustration details. Run a code check for an exact address to see the permit requirements for that zone.
Excelsior's sign code covers 20 sign types, including Freestanding Sign, Projecting Sign, Awning or Canopy Sign, and Wall Sign. Most commercial signs need a permit. The ordinance lists 10 exemptions. One of them: Official signs are permitted without a permit. The full list is on this page.
This page doesn't list a single setback distance for signs in Excelsior. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Rules in Excelsior's sign ordinance that cover digital, changing, or flashing signs: Flashing signs are prohibited in all zoning districts. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Excelsior Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Excelsior, Minnesota, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Excelsior, Minnesota Sign Rules at a Glance
Excelsior, Minnesota regulates 20 sign types across 5 zoning districts. Awning or Canopy Signs in the Downtown Commercial District (DC district) are capped at 8 inches tall and 7 square feet (Sec. 24-9(5)). Most commercial signs in Excelsior require a permit.
Detailed Sign Ordinance Requirements for Excelsior, Minnesota
Sign Rules by Zoning District in Excelsior (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 5 | 5 feet | 6 square feet per side | Not listed |
| Residential District (R districts) | 6 | 8 feet | 32 square feet (aggregate) | Not listed |
| Downtown Commercial District (DC district) | 4 | 8 inches | 27 square feet per sign; max 40 square feet if multiple signs are combined/integrated | Not listed |
| Community Commercial District (CC district), Mixed Use District (MU district), General Commercial District (GC district) | 7 | 8 inches | 75 square feet per sign; 100 square feet max for grouping/combined signs. | Not listed |
| Commercial Zoning Districts | 1 | 5 feet | 6 square feet (per side) | Not listed |
Zone-by-Zone Sign Requirements in Excelsior(sample of 3 of 5 zones)
Residential District (R districts)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Dwelling Sign | Not listed | 2 square feet per surface | Not listed | Not listed | 1 per dwelling; 1 per frontage if abutting >1 right-of-way | On property (likely attached to house or in yard). | Not listed | Unlock | Sec. 24-8(a) |
| Monument Sign (Multiple Dwellings with 4+ units) | 6 feet | Not listed | Not listed | Not listed | 1 per multiple dwelling (4+ units) | Yard/lot of multi-dwelling building (4+ units). | Not listed | Unlock | Sec. 24-8(b) |
| Wall Sign (Multiple Dwellings with 4+ units) | Not listed | 32 square feet (aggregate) | Not listed | Not listed | 1 per multiple dwelling (4+ units) | On wall of multiple dwelling structure (4+ units). | Not listed | Unlock | Sec. 24-8(b) |
| Monument Sign (Other Nonresidential Uses) | 8 feet | Not listed | Not listed | Not listed | 1 per nonresidential use | On yard/lot of nonresidential uses permitted/conditionally permitted in R district. | Not listed | Unlock | Sec. 24-8(c) |
| Wall Sign (Other Nonresidential Uses) | Not listed | 32 square feet (aggregate) | Not listed | Not listed | 1 per nonresidential use | Attached to nonresidential owner/tenant building. | Not listed | Unlock | Sec. 24-8(c) |
| Home Occupation Sign | Not listed | 2 square feet | Not listed | Not listed | 1 per home occupation | On property with home occupation. | Not listed | Unlock | Sec. 24-8(d) |
Downtown Commercial District (DC district)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Permitted Signs (Wall, Projecting, Freestanding, Window, or Awning/Canopy Signs) | Not listed | 27 square feet per sign; max 40 square feet if multiple signs are combined/integrated | Not listed | Not listed | Up to 3 (more permitted w/ admin permit for multi-tenant) | On property frontage (see formula); window signs as allowed; awning/canopy signs on entry. | Not listed | Unlock | Sec. 24-9(1)-(3), (5) |
| Projecting Sign | Not listed | 8 square feet | Not listed | At least 7 ft above public sidewalk. May project max 5 ft into right-of-way. | Not listed | Projecting from building into public right of way. | Not listed | Unlock | Sec. 24-9(4) |
| Awning or Canopy Sign | 8 inches | 7 square feet | Not listed | Not listed | Not listed | On awning or canopy at building entrance. | Not listed | Unlock | Sec. 24-9(5) |
| Freestanding Sign | 4.5 feet | Not listed | Not listed | Not listed | Not listed | On lot frontage in compliance with historic requirements. | Not listed | Unlock | Sec. 24-9(6) |
Community Commercial District (CC district), Mixed Use District (MU district), General Commercial District (GC district)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Permitted Signs (Wall, Projecting, Freestanding, Window, or Awning/Canopy Signs) (CC/MU) | Not listed | 27 square feet per sign; max 40 square feet if multiple signs are combined or integrated. | Not listed | Not listed | Up to 3 (more with admin permit for multi-tenant) | On property as described in formula. | Not listed | Unlock | Sec. 24-10(1)-(3), (5) |
| Permitted Signs (Wall, Projecting, Freestanding, Window, or Awning/Canopy Signs) (GC district) | Not listed | 75 square feet per sign; 100 square feet max for grouping/combined signs. | Not listed | Not listed | Up to 3 (more with admin permit for multi-tenant) | On property as described in formula. | Not listed | Unlock | Sec. 24-10(1)-(3) |
| Projecting Sign | Not listed | 8 square feet | Not listed | Not listed | Not listed | Projecting from building into public right-of-way. | Not listed | Unlock | Sec. 24-10(4) |
| Awning or Canopy Sign | 8 inches | 7 square feet | Not listed | Not listed | Not listed | On awning or canopy at building entrance. | Not listed | Unlock | Sec. 24-10(5) |
| Freestanding Sign (Historic District properties) | 4.5 feet | Not listed | Not listed | Not listed | Not listed | On property in Excelsior Downtown Historic District. | Not listed | Unlock | Sec. 24-10(6) |
| Monument Sign (outside Historic District) | 4.5 feet (8 feet in GC district) | Not listed | Not listed | Not listed | Not listed | On property outside Excelsior Downtown Historic District. | Not listed | Unlock | Sec. 24-10(6) |
| Motor Fuel Facility Price Sign | Not listed | 10 square feet (within a permitted business sign) | Not listed | Not listed | Only as integrated into business signs | Part of an allowed business sign. | Not listed | Unlock | Sec. 24-10(7) |
PermitPal covers all 5 zoning districts in Excelsior. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Excelsior
- It is unlawful to erect, alter, or relocate any sign without first obtaining a permit from the zoning administrator, unless otherwise exempted.
- Any sign, signal, marking or device which imitates or resembles any official traffic control device, railroad sign or signal, or emergency vehicle sign, or that attempts to direct the movement of traffic, or hides/interferes with official traffic-control devices or railroad signs/signals is prohibited.
- No sign may be attached/hung from any building until wall and roof attachments have been approved by the city building official.
- No signs, guys, stays or attachments shall be erected, placed or maintained on rocks, fences or trees nor interfere with utility wires or their supports.
- Illuminated signs must not direct lights at oncoming traffic or interfere with/obscure official traffic signs or signals. This includes indoor signs visible from public streets.
- No sign shall be placed within any drainage or utility easement or within the public right-of-way except by license agreement issued according to regulations.
- No sign or sign structure shall be erected/maintained that blocks free ingress or egress from doors, windows, or fire escapes, or is attached to a stand pipe or fire escape.
- No sign or structure shall be placed on or protrude over the public right-of-way except certain exceptions (wall, canopy, awning, marquee, and nonilluminated sandwich board signs up to eight square feet per side) and must be at least eight feet above grade.
- The top edge of a wall sign shall not extend above the mean roof level (with specific rule for mansard roofs).
- If a sign is not part of or attached to the principal structure, it must conform to setback requirements.
- Obsolete signs (reason of business closure or vacation of premises) must be removed by the property owner or agent.
- Upon written notice of a violation or prohibition from the zoning administrator, the sign must be removed or corrected by the owner, lessee, or manager within 30 days.
- All signage shall comply with design standards and requirements of the heritage preservation commission, where applicable.
- Off-premises signs are prohibited except expressly allowed under section 24-6(4).
- Except for traffic control, all signs are prohibited within the public right-of-way or easements, except by administrative permit.
- Prohibited signs include: revolving beacons, revolving signs, moving signs or parts, zip flashers, flashing signs (excluding some time & temperature and barber poles), content classified as obscene per state law, artificially lit roofs/walls except security or architectural highlighting, illuminated signs which flash, scroll, animate or change color/intensity (with some exceptions), pylon signs, electronic changeable copy signs, electronic graphic display signs, multivision signs, roof signs, signs on trees/natural surfaces/utility poles/bridges/towers/public structures, and video display signs.
- No internal or back lighting of signs is allowed.
- All artificially illuminated signs must use minimal artificial light needed to light the sign and lighting must be facing downward (or up as permitted), with minimal glare/reflected light.
- Flashing signs are prohibited in all zoning districts.
- All signage must comply with outdoor lighting standards per section 16-5.
- Artificial light fixtures must be fully enclosed by opaque material, transmitting light in only one direction (except specified bulb types).
- All artificial light sources must be contained in fully opaque fixtures controlling light to prevent broadcast/glare beyond the sign.
- All artificial illumination of signs must be turned off at the close of business or by 11:00 p.m., whichever is later.
Exempt Signs in Excelsior
- Official signs are permitted without a permit.
- All noncommercial speech signs of any size, number, and duration allowed during the period from 46 days before the state primary to 10 days after the general election, and 13 weeks before any special election to 10 days after the election, provided they comply with state law.
- One sign per street frontage is allowed when a building or site is under construction (not exceeding 32 square feet, eight feet in height, not illuminated, removed within one year of building permit or project completion) without a permit.
- One sign per street frontage is allowed when a building is for sale or lease, with limitations based on zoning district and sign size/height, and must be removed within seven days of sale or lease, without a permit.
- Temporary signs printed or attached on the interior of a window in commercial zones are exempt if they do not exceed 25 percent of window area.
- Flags or insignia of any government or governmental agency are permitted without a permit.
- One temporary sign per property in residential districts not exceeding five square feet in size does not require a permit.
- Existing historic signs as allowed by the Heritage Preservation Commission are exempt.
- Three signs not exceeding four square feet each are permitted per property without permit.
- Portable signs are permitted to occupy public/private sidewalks in commercial districts if within five feet of business entry, only during business hours, not impeding traffic/access, and between three and five feet in height and three to six square feet in area, without permit.
Sign Plan & Submission Notes for Excelsior
- Comprehensive sign plans are required for any multi-tenant building or development where different occupancies will compete for permitted sign square footage on a single lot.
- A comprehensive sign plan must be approved by the zoning administrator before any permanent sign is erected by any owner or occupant of the building/property.
- A comprehensive sign plan application must include a site plan, tables/calculations of allowable sign areas and frontages, sign location/orientation, and potentially color/material/illustration details.
- Comprehensive sign plans may be amended only by filing a new plan and obtaining zoning administrator approval.
- After approval of a comprehensive sign plan, all permanent signs must comply with the plan and have a permit.
- Variances for signs may be granted by the city council per article 6 of the ordinance.
- Aggregate sign area or number exceptions for signs in various districts, multi-tenant buildings, or certain monument/freestanding signs may require an administrative permit or conditional use permit per site, but are subject to general plan/permit requirements.
Source: municode municipal code