Questions? Call us at (262) 218-2915

Sign Regulations in Gaylord, Minnesota

Gaylord, Minnesota has specific sign regulations covering 16 sign types across 5 zoning districts. Regulated sign types include Address Sign, Monument Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Gaylord, Minnesota

Sample Sign Requirements in Gaylord

Sign TypeMax HeightMax AreaSetback
Address SignNot listed2 sq ft for business/dwelling; 6 sq ft per surface for groups of 4-12; 12 sq ft per surface for groups of 12+Not listed
Temporary Construction Site Sign8 ft, or 15 ft if adjacent to a principal arterial32 sq ft, or 100 sq ft if adjacent to a principal arterialNot listed
Temporary Property For Sale or Lease Sign8 ft, or 15 ft if adjacent to a principal arterial32 sq ft, or 100 sq ft if adjacent to a principal arterialNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for GaylordFull Coverage

Sign Types Covered

16

  • Address Sign
  • Monument Sign
  • Wall Sign
  • Sandwich Board Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Gaylord, the height limit for Pylon Sign in the Commercial and Industrial (B-2, B-3, I-1, I-2) zoning districts is 35 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Gaylord require a permit. From the submission notes on this page: Master sign plans are preferred for all multiple tenant developments and/or structures. Sign placement and material for multiple tenant signs shall be uniform and consistent with the development. All signs in the master sign plan must conform with applicable standards. Run a code check for an exact address to see the permit requirements for that zone.

Gaylord's sign code covers 16 sign types, including Address Sign, Monument Sign, Wall Sign, and Sandwich Board Sign. Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: No permit or registration required for address signs as outlined in J(2). The full list is on this page.

In Gaylord, Monument Sign in the Commercial and Industrial (B-2, B-3, I-1, I-2) zoning districts must be set back 5 ft from any public right-of-way. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Gaylord's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Gaylord Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Gaylord, Minnesota, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Gaylord, Minnesota Sign Rules at a Glance

Gaylord, Minnesota regulates 16 sign types across 5 zoning districts. Temporary Directional Signs are capped at 6 ft tall and 32 sq ft, set back 10 ft from street right-of-way or property line. Most commercial signs in Gaylord require a permit.

Detailed Sign Ordinance Requirements for Gaylord, Minnesota

Sign Rules by Zoning District in Gaylord (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones912 ft (main signs), 6 ft (per-lot signs)35% of allowable sign areaNot listed
Residential Districts (A, R-1, R-2, PD)36 ft48 sq ftNot listed
B-1, Central Business District66 ft32 sq ftNot listed
Commercial and Industrial (B-2, B-3, I-1, I-2)635 ft150 sq ft (max 200 sq ft if facing principal arterial)Not listed
I-2, Heavy Industrial District130 ft300 sq ft per side (may incorporate cutouts up to 350 sq ft)Not listed

Zone-by-Zone Sign Requirements in Gaylord(sample of 3 of 5 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address SignNot listed2 sq ft for business/dwelling; 6 sq ft per surface for groups of 4-12; 12 sq ft per surface for groups of 12+Not listedNot listedOne per building; group rules as aboveOn the side of the building facing the street of the address; one at main entrance if not facing street.Not listedUnlock§ 153.47 (J)(2)
Temporary Sign (Non-Commercial Speech)Not listedNot listedNot listedNot listedNot listedOn private property or the right-of-way in front of private property with owner approval; not on public propertyNot listedUnlock§ 153.47 (J)(3)(a)
Temporary Banner or PennantNot listedNot listedNot listedNot listedMax 2 per principal structure at one timeNot listedNot listedUnlock§ 153.47 (J)(3)(b)
Temporary Construction Site Sign8 ft, or 15 ft if adjacent to a principal arterial32 sq ft, or 100 sq ft if adjacent to a principal arterialNot listedNot listed2 per construction siteAt construction siteNot listedUnlock§ 153.47 (J)(3)(d)
Temporary Property For Sale or Lease Sign8 ft, or 15 ft if adjacent to a principal arterial32 sq ft, or 100 sq ft if adjacent to a principal arterialNot listedNot listed1 per street frontageOn property for sale/leaseNot listedUnlock§ 153.47 (J)(3)(f)
Temporary Directional Sign6 ft32 sq ftNot listed10 ft from street right-of-way or property lineMax 1 per intersection/parcelOn private property with written owner approval; 10 ft from street right-of-way or property lineNot listedUnlock§ 153.47 (J)(3)(g)
Temporary Subdivision Development Sign12 ft (main signs), 6 ft (per-lot signs)12 ft height for up to 2 signs (area not specified), plus 1 sign up to 4 sq ft, 6 ft height per lotNot listedNot listedUp to 2 per subdivision, 1 per lotIn subdivision under developmentNot listedUnlock§ 153.47 (J)(3)(h)
Dynamic SignNot listed35% of allowable sign areaNot listedNot listedNot listedOn monument or wall signs (any zone if use allowed under CUP), or on monument, pylon, wall signs in B-1, B-2, B-3Not listedUnlock§ 153.47 (J)(4)

B-1, Central Business District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address SignNot listed4 sq ft per buildingNot listedNot listed1 per buildingOn buildingNot listedUnlock§ 153.47 (K)(2)(a)
Monument Sign6 ft32 sq ft10 ftNot listed1 per lot1 per lotNot listedUnlock§ 153.47 (K)(2)(b)
Wall SignNot listed20% of building faceNot listedNot listed1 per building face/per tenantOn each building face; multi-tenant buildings: one per tenantNot listedUnlock§ 153.47 (K)(2)(c)
Sandwich Board SignNot listed9 sq ftNot listedNot listed2 per businessOn business property or sidewalk directly abuttingNot listedUnlock§ 153.47 (K)(2)(d)
Canopy/Awning SignNot listedNot listedNot listedNot listed1 per lotOn canopy/awningNot listedUnlock§ 153.47 (K)(2)(e)
Projecting SignNot listed20 sq ft5 ftNot listed1 per building faceOn building face (not above 1st floor); up to 5' projection out (max 1' clearance to building)Not listedUnlock§ 153.47 (K)(2)(f)

Commercial and Industrial (B-2, B-3, I-1, I-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address SignNot listed4 sq ft per buildingNot listedNot listed1 per buildingOn buildingNot listedUnlock§ 153.47 (K)(3)(a)
Monument SignNot listed150 sq ft (max 200 sq ft if facing principal arterial)Not listed5 ft from any public right-of-way1 per street frontage per lot1 per street frontage per lotNot listedUnlock§ 153.47 (K)(3)(b)
Wall SignNot listed20% of building faceNot listedNot listed1 per building face/per tenant1 per building face; 1 per tenant for multi-tenant bldgsNot listedUnlock§ 153.47 (K)(3)(c)
Pylon Sign35 ft150 sq ft (max 200 sq ft if facing principal arterial)Not listed5 ft from any public right-of-way1 per lot1 per lotNot listedUnlock§ 153.47 (K)(3)(d)
Sandwich Board SignNot listed6 sq ftNot listedNot listed1 per businessOn business property or sidewalk directly abuttingNot listedUnlock§ 153.47 (K)(3)(e)
Canopy/Awning SignNot listedNot listedNot listedNot listed1 per lotOn canopy/awningNot listedUnlock§ 153.47 (K)(3)(f)

PermitPal covers all 5 zoning districts in Gaylord. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Gaylord

  • Off-premises signs.
  • Signs containing statements, words, or pictures of an obscene, indecent, or immoral character, or such as would offend public morals or decency.
  • Signs painted, attached or in any manner affixed to utility poles, trees, rocks, or similar natural surfaces.
  • Roof signs.
  • Signs that resemble any official marker erected by a government agency by reason of position, shape, or color, which would interfere with the proper function of a traffic sign, signal or be misleading to vehicular traffic.
  • Signs in, upon, or projecting into any public right-of-way or easement, except for projecting signs as regulated in the B-1, Central Business District.
  • Signs located within the sight triangle or located to otherwise interfere with the ability of vehicle operations or pedestrians to see traffic signs or signals, or which impede the vision of traffic.
  • Signs which obstruct any window, door, fire escape, stairway or opening intended to provide ingress or egress to any structure or building.
  • Any sign not in conformance with these regulations, other than a non-conforming sign.
  • Any other sign not expressly permitted by the provisions of this section.

Exempt Signs in Gaylord

  • Permanent window signs, provided that a minimum of 50% of the area of the window remains free from signage.
  • Signs having an area of two square feet or less.
  • Signs which are entirely within a building and not visible from outside of said building.
  • Memorial signs or tablets, names of buildings and date of erection when cut into or attached to any masonry surface or noncombustible material within the building façade.
  • Address signs.
  • Replacement and/or repainting of a sign face, lettering, or other sign material so long as the location, configuration and area of the sign remain the same.
  • No permit or registration required for address signs as outlined in J(2).
  • No permit or registration required for signs containing non-commercial speech that comply with J(3)(a).
  • No permit is required for sandwich signs if in compliance with the respective district regulations.

Sign Plan & Submission Notes for Gaylord

  • Master sign plans are preferred for all multiple tenant developments and/or structures. Sign placement and material for multiple tenant signs shall be uniform and consistent with the development. All signs in the master sign plan must conform with applicable standards.
  • A comprehensive sign plan may be issued for multiple tenant occupancies and/or commercial planned unit developments within the B-1, B-2, B-3, I-1, and I-2 Districts as an alternative to strict adherence to standard regulations. Comprehensive sign plans are reviewed administratively, or may be referred to the Planning and Zoning Commission and/or City Council.
  • Comprehensive sign plan amendments (minor) may be approved administratively, as long as certain criteria are met.
  • Variance from sign requirements (such as square footage, height, and setback) may be granted in accordance with the variance provisions of this chapter.