Sign Regulations in Pipestone, Minnesota
Pipestone, Minnesota has specific sign regulations covering 49 sign types across 7 zoning districts. Regulated sign types include All Signs - General Rules, Identification Sign - General Requirement, Electric Sign - General. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: December 30, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Pipestone, Minnesota
Sample Sign Requirements in Pipestone
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| All Signs - General Rules | Not listed | Not listed | No sign in front 5 feet of any required setback. Signs prohibited in public right‑of‑way. Traffic visibility protections at intersections/driveways as in fence/visibility rules. |
| Electric Sign - General | Not listed | If placed at any angle over public property: 200 sq ft maximum area. | Not listed |
| Residential Sign - General (applies wherever residential signs allowed) | Not listed | Standard: 2 sq ft; up to 8 sq ft with Planning Commission approval. | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
49
- All Signs - General Rules
- Identification Sign - General Requirement
- Electric Sign - General
- Roof Sign (All Districts)
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Pipestone
Other Cities in Minnesota
Frequently Asked Questions
In Pipestone, the height limit for Historic District - Monument Sign in the Historic District is 6 ft (Sec. 153.32(W)(6)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Pipestone require a permit. From the submission notes on this page: In heritage preservation sites and within the Historic District, all signage must be reviewed and approved by the Heritage Preservation Commission (HPC) under a special HPC permit application that includes a detailed drawing of the proposed signage. Run a code check for an exact address to see the permit requirements for that zone.
Pipestone's sign code covers 49 sign types, including All Signs - General Rules, Identification Sign - General Requirement, Electric Sign - General, and Roof Sign (All Districts). Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: Political signs, temporary signs, and real estate signs 16 square feet or less do not require a building permit. The full list is on this page.
In Pipestone, Real Estate Sign - Residential Project (10+ units) must be set back at least 100 ft from any neighboring residence (Sec. 153.32(L)(1)-(4)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Pipestone's sign ordinance that cover digital, changing, or flashing signs: Signs giving off an intermittent or rotating beam or ray of light are prohibited. Flashing illuminated signs are prohibited, except signs giving time, date, temperature, weather, or similar public service information. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Pipestone Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Pipestone, Minnesota, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Pipestone, Minnesota Sign Rules at a Glance
Pipestone, Minnesota regulates 49 sign types across 7 zoning districts. Real Estate Signs - Individual Lot/Structure are capped at 16 sq ft, set back at least 10 ft from any property line. Most commercial signs in Pipestone require a permit.
Detailed Sign Ordinance Requirements for Pipestone, Minnesota
Sign Rules by Zoning District in Pipestone (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 13 | Not listed | If placed at any angle over public property: 200 sq ft maximum area. | Not listed |
| Residential District (R-1, R-2, R-3); Residential Districts | 6 | 8 ft above grade maximum height. | 80 sq ft maximum aggregate surface area for all such signs on the plat. | Not listed |
| B-1 Neighborhood Business District | 3 | Per Residential District rules (e.g., 8 ft for residential development ID). | 100 sq ft maximum area (aggregate face area for double‑faced sign). | Not listed |
| Commercial Districts (B-1, B-2, B-3); Industrial District (I-1, I-2); Nonresidential Districts | 7 | 25 ft maximum height from ground to top of sign. Greater height possible only with conditional use permit. | 150 sq ft maximum area. | Not listed |
| Planned Development | 2 | Same as Residential District caps (e.g., 8 ft for residential housing development ID signs). | May not exceed the maximum area allowed for comparable signs in Residential Districts (e.g., 2–8 sq ft for residential signs, 80 sq ft subdivision plat, 32 sq ft housing development IDs, etc.). | Not listed |
| Special District (C-1) | 1 | Not listed | Not listed | Not listed |
| Historic District | 17 | Maximum letter height 18 inches. | Maximum total size 25 sq ft. | Not listed |
Zone-by-Zone Sign Requirements in Pipestone(sample of 3 of 7 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| All Signs - General Rules | Not listed | Not listed | Not listed | No sign in front 5 feet of any required setback. Signs prohibited in public right‑of‑way. Traffic visibility protections at intersections/driveways as in fence/visibility rules. | Not listed | Accessory use signs are permitted in all districts. Signs are prohibited within the public right-of-way of any street or easement. Must maintain traffic visibility and egress from doors/windows/fire escapes. | Not listed | Unlock | §153.32(B)(1)-(8),(10)-(12); §153.32(A); §153.32(Q) |
| Identification Sign - General Requirement | Not listed | Not listed | Not listed | Not listed | 1 identification sign per building (accessory structures and residential buildings only required to show address/number). | Per building, in all zoning districts. | Not listed | Unlock | §153.32(B)(10); definition §153.32(C) IDENTIFICATION SIGN |
| Electric Sign - General | Not listed | If placed at any angle over public property: 200 sq ft maximum area. | Not listed | Not listed | Max 1 electric sign per building face per occupant. | May be attached to each face of a building, including projecting over public property subject to size limit. | Not listed | Unlock | §153.32(F); definition §153.32(C) ELECTRIC SIGNS |
| Residential Sign - General (applies wherever residential signs allowed) | Not listed | Standard: 2 sq ft; up to 8 sq ft with Planning Commission approval. | Not listed | Not listed | Not listed | On residential premises. | Not listed | Unlock | §153.32(H)(1)-(3); §153.32(I) |
| Political Sign | Not listed | No explicit maximum; "all non‑commercial signs of any size" during allowed periods. | Not listed | Not listed | Not listed | Any zoning district, on private property; still subject to general safety/visibility rules. | Not listed | Unlock | §153.32(B)(1); §153.32(J) |
| Construction Sign (General) | Not listed | 32 sq ft maximum area. | Not listed | Not listed | Not listed | On or near construction sites in any district. | Not listed | Unlock | §153.32(B)(1); §153.32(K) |
| Real Estate Sign - Individual Lot/Structure | Not listed | 16 sq ft maximum area. | Not listed | Minimum 10 ft from any property line. | Not listed | In any yard of any zoning district, for individual lots or structures. | Not listed | Unlock | §153.32(B)(1); §153.32(L) (opening paragraph) |
| Real Estate Sign - Residential Project (10+ units) | Not listed | 100 sq ft maximum area per sign. | Not listed | Minimum 100 ft from any neighboring residence. | Max 1 per road frontage, max 2 per project. | Erected on residential project site of 10 or more dwelling units; one sign per road frontage (max two per project). | Not listed | Unlock | §153.32(L)(1)-(4) |
Commercial Districts (B-1, B-2, B-3); Industrial District (I-1, I-2); Nonresidential Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Business Sign - Freestanding (Commercial and Industrial Districts) | 25 ft maximum height from ground to top of sign. Greater height possible only with conditional use permit. | 100 sq ft maximum total area of freestanding signage per premises. | Not listed | Subject to general setback rule (no sign in front 5 ft of required setback; no sign in public right‑of‑way). | 1 monument or freestanding sign per premises in Commercial and Industrial Districts. | On‑site, in Commercial (B‑1, B‑2, B‑3) and Industrial (I‑1, I‑2) Districts as monument or freestanding sign identifying the premises. | Not listed | Unlock | §153.32(D)(1)-(3) |
| Business Sign - Wall Sign Identifying Premises (Commercial and Industrial Districts) | Not listed | Not listed | Not listed | Not listed | 1 primary wall sign per premises; additional tenant wall signs allowed per joint‑tenancy rule. | Attached flat against or represented on the surface of a building wall in Commercial and Industrial Districts. May have depth up to 15 inches. | Not listed | Unlock | §153.32(D)(1),(3); definition §153.32(C) WALL SIGNS |
| Business Sign - Wall Sign (Joint Tenancy Individual Entrances) | Not listed | 32 sq ft maximum area per wall sign above individual entrances. | Not listed | Not listed | Each tenant in a joint‑tenancy structure with individual outside entrance may have one wall sign above its entrance (32 sq ft max). | Above individual outside entrances in structures with joint tenancy in Commercial and Industrial Districts. | Not listed | Unlock | §153.32(D)(1),(3) |
| Home Occupation Sign (Commercial and Industrial Districts) | Not listed | 4 sq ft maximum area. | Not listed | Not listed | 1 per qualifying home occupation/resident professional office/boarding or lodging house. | On premises of resident professional offices, home occupations, boarding and lodging houses within Commercial and Industrial Districts. | Not listed | Unlock | §153.32(D)(4) |
| Business Signs - Nonresidential Districts (General) | Not listed | Of the three allowed business signs per building/business, two signs are limited to 10 sq ft each; one business sign may be up to 100 sq ft in area. | Not listed | Not listed | 3 business signs per main building or per business in a series (2 small at 10 sq ft, 1 larger up to 100 sq ft). | On each main building or each business in a series of attached businesses (such as a shopping center) in Nonresidential Districts (which include Commercial and Industrial where these uses are permitted). Any type of sign allowed by code (wall, projecting, freestanding, etc., subject to other sections). | Not listed | Unlock | §153.32(T)(2) |
| Shopping Center Sign - Nonresidential Districts (General) | Not listed | 150 sq ft maximum area. | Not listed | Not listed | One shopping center sign per business complex of four or more stores. | For business complexes of four or more separate stores in Nonresidential Districts. | Not listed | Unlock | §153.32(T)(3); §153.32(G) |
| Signs Permitted in Residential Districts (Nonresidential Districts) | Not listed | As per Residential District allowances for the same uses. | Not listed | Not listed | Not listed | In Nonresidential Districts for those uses which are of the same type as permitted residential uses (e.g., schools, churches, civic organizations located in nonresidential zones). | Not listed | Unlock | §153.32(T)(1) |
Historic District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Historic District - General Signage Requirement | Not listed | Not listed | Not listed | Not listed | Standard: 1 sign per building; corner buildings may have 1 per street face; additional signage may be permitted by HPC for buildings with separate ground‑level entries for multiple tenants. | On buildings within the Historic District or on buildings designated as heritage preservation sites. | Not listed | Unlock | §153.32(V)(1)-(2),(a)-(c),(e) |
| Historic District - Painted Sign (Side/Rear Walls Only) | Not listed | Not restricted as to size or lettering height by Historic‑specific rule. | Not listed | Not listed | Not listed | Painted directly onto wall surface of building; only on side or rear walls in Historic District. | Not listed | Unlock | §153.32(W)(1) |
| Historic District - Surface Applied Panelized Sign | 4 ft maximum sign height (panel dimension). | Maximum 20 ft length and 4 ft height. | 20 ft maximum sign length. | Not listed | Not listed | Applied to wall surface in Historic District. | Not listed | Unlock | §153.32(W)(3) |
| Historic District - Horizontal Projecting Sign | 4 ft maximum sign height (panel dimension). Must clear sidewalk by at least 10 ft. | Maximum total size 25 sq ft. | Not listed | Not listed | Not listed | Projects at 90° from wall surface between ground floor and second floor; aligned vertically with other similar signage on the street; may not be placed over a window opening. | Not listed | Unlock | §153.32(W)(4) |
| Historic District - Vertical Projecting Sign | 8 ft maximum sign height; must clear sidewalk by minimum 10 ft. | Not listed | 30 inches maximum width; maximum thickness 10 inches. | Not listed | Not listed | Projects at 90° from wall between ground floor and second floor in Historic District; aligned vertically with other signage on the street; may not be placed over a window opening. | Not listed | Unlock | §153.32(W)(5) |
| Historic District - Monument Sign | 6 ft maximum height. | Length limited to the lesser of 12 ft or one‑third of lot frontage. | Maximum length 12 ft and no more than one‑third of lot frontage. | Not listed | Not listed | Freestanding on perimeter or open lots and on lots with front and side yard setbacks in Historic District. | Not listed | Unlock | §153.32(W)(6) |
| Historic District - Exterior Temporary Building Construction Sign | Not listed | Maximum size 3 ft by 5 ft (15 sq ft). | 3 ft by 5 ft. | Not listed | Not listed | Exterior of building or site undergoing construction in Historic District. | Not listed | Unlock | §153.32(W)(11)(b) |
| Historic District - Exterior Temporary Leasing Sign | Not listed | Maximum size 3 ft by 5 ft (15 sq ft). | 3 ft by 5 ft. | Not listed | Not listed | On buildings or premises offered for lease within Historic District. | Not listed | Unlock | §153.32(W)(11)(c) |
PermitPal covers all 7 zoning districts in Pipestone. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Pipestone
- All sign installations require a building permit except for political signs, temporary signs, and real estate signs 16 square feet or less.
- No sign is allowed that is a hazard to public health, safety, convenience, or welfare.
- No sign is allowed that prevents ingress or egress from any door, window, or fire escape.
- No sign is allowed that tends to accumulate debris as a fire hazard.
- No sign is allowed that is attached to a standpipe or fire escape.
- No sign may be erected that, by reason of position, shape, movement, color, or any other characteristic, interferes with the proper functioning of a traffic sign or signal or otherwise constitutes a traffic hazard.
- No signs are permitted that would interfere with traffic control.
- Signs are prohibited within the public right-of-way of any street or easement.
- Any animal displays, lights directed skyward, pieces of sculpture, fountains, or other features that function to direct attention to a product, place, activity, institution, organization, or business are treated as signs and are allowed only as a conditional use.
- Signs giving off an intermittent or rotating beam or ray of light are prohibited.
- No sign may contain any indecent or offensive picture or written matter, as determined by the Zoning Administrator (subject to appeal to the Board of Appeals and Adjustments).
- No sign shall be placed in the front five feet of any required setback in any district, except that where a building occupies that area, projections are limited to eight feet from the building face or three feet from the curb, whichever is less.
- Billboard signs (off-premise advertising signs) are prohibited within the city limits, except for specified city-operated noncommercial public-interest signs.
- Roof signs are allowed only as a conditional use in all districts.
- Flashing illuminated signs are prohibited, except signs giving time, date, temperature, weather, or similar public service information.
- No electrically illuminated signs are permitted in an area of five or more homes in close proximity.
- Illuminated signs must be diffused or indirect so as not to direct rays of light into adjacent property or onto any public way.
- Mobile or other temporary signs on wheels or otherwise capable of being moved must conform to all sign provisions applicable to permanently affixed signs.
- Any sign that no longer advertises a bona fide business conducted or a product sold must be removed within 30 days after written notice from the Zoning Administrator.
- Any sign determined unsafe or structurally dangerous by the Building Official must be removed within ten days after written notification from the Zoning Administrator.
- Any sign type not covered by another section requires a conditional use permit (i.e., it is not permitted by right).
Exempt Signs in Pipestone
- Political signs, temporary signs, and real estate signs 16 square feet or less do not require a building permit.
- The sign regulations do not apply to signs painted, attached by adhesive, or otherwise attached directly to, or visible through, windows and glass portions of doors.
- City-operated signs on city-owned property that display non-commercial information in the public interest are exempt from the general billboard prohibition and from the provisions of the sign section, provided they do not exceed 50 square feet in area.
Sign Plan & Submission Notes for Pipestone
- All sign installations (with the stated exceptions) require a building permit prior to installation.
- Roof signs are allowed only by conditional use permit in all districts.
- Business signs with freestanding sign height exceeding 25 feet may be permitted only via conditional use permit.
- Any animal displays, skyward lights, sculpture, fountains, or similar attention-getting devices that function as signs require a conditional use permit.
- Any sign type not specifically covered elsewhere in the ordinance requires a conditional use permit.
- In heritage preservation sites and within the Historic District, all signage must be reviewed and approved by the Heritage Preservation Commission (HPC) under a special HPC permit application that includes a detailed drawing of the proposed signage.
- Temporary exterior signage in the Historic District (banners, building construction signs, leasing signs, and special event signs) requires HPC permitting and is subject to specific time limits and renewal conditions.
- Signs in planned developments must be approved by the Planning Commission as part of the planned development review; sign allowances may not exceed the corresponding Residential (R) or B-1 District standards, as applicable.
Source: other municipal code