Questions? Call us at (262) 218-2915

Sign Regulations in Rogers, Minnesota

Rogers, Minnesota has specific sign regulations covering 14 sign types across 10 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Auxiliary Sign (Wall or Freestanding). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Rogers, Minnesota

Sample Sign Requirements in Rogers

Sign TypeMax HeightMax AreaSetback
Wall SignNot listed2 sq ftNot listed
Freestanding Sign (Real Estate)6 ft6 sq ftOne-foot setback from any property line; must preserve clear vision area (Sec. 113-9, Note c)
Freestanding Sign8 ft36 sq ftOne-foot setback from property line; clear vision area required

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RogersFull Coverage

Sign Types Covered

14

  • Wall Sign
  • Freestanding Sign
  • Auxiliary Sign (Wall or Freestanding)
  • Freestanding Sign (Real Estate)
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Rogers

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Rogers, the height limit for Freestanding Sign in the CB community business sign overlay district (B-1) is 12 ft. The height limit for Wall Sign in certain zoning districts is 12 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Rogers require a permit. From the submission notes on this page: A temporary permit application and a map of signage locations are required for certain types of off-premises temporary signage (Sec. 113-14(f)(3)). Run a code check for an exact address to see the permit requirements for that zone.

Rogers's sign code covers 14 sign types, including Wall Sign, Freestanding Sign, Auxiliary Sign (Wall or Freestanding), and Freestanding Sign (Real Estate). Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Religious symbols or works of art that do not contain a commercial message. The full list is on this page.

In Rogers, Freestanding Sign in certain zoning districts must be set back 1 ft from property line. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Rogers's sign ordinance that cover digital, changing, or flashing signs: Flashing signs, except when used to provide primarily time and temperature or other public service information and not to exceed 25 percent of the area of the sign face. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Rogers Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rogers, Minnesota, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Rogers, Minnesota Sign Rules at a Glance

Rogers, Minnesota regulates 14 sign types across 10 zoning districts. Subdivision Identification Signs are capped at 5 ft tall and 32 sq ft (Sec. 113-11(d)). Most commercial signs in Rogers require a permit.

Detailed Sign Ordinance Requirements for Rogers, Minnesota

Sign Rules by Zoning District in Rogers (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
R residential sign overlay district (R-2)26 ft6 sq ftNot listed
RMI residential, multifamily and institutional sign overlay district (AG, AG-PUD, R-2, R-3, R-4, city parks and facilities, nonresidential uses in R-2 through R-4)38 ft60 sq ftNot listed
TTC traditional town center sign overlay district (B-1, L-1, R-2 on certain streets)512 ft48 sq ftNot listed
CB community business sign overlay district (B-1)412 ft100 sq ftNot listed
RB regional business sign overlay district (B-1, B-2, B-3, B-C)315 ft100 sq ftNot listed
IG industry general sign overlay district (I-1, SI, south of I-94, north of I-94 and west of Highway 101)36 ft60 sq ftNot listed
ILS industry large site sign overlay district (I-1, SI, north of I-94 and east of Highway 101)38 ft120 sq ftNot listed
SI special industrial zoning district2Not listed680 sq ftNot listed
AG, AG-PUD, R-3, R-4, B-1, B-2, B-3, B-C, L-1, I-11Not listedNot listedNot listed
General Regulations For All Zones5No part <8 ft or >12 ft above grade40 sq ftNot listed

Zone-by-Zone Sign Requirements in Rogers(sample of 3 of 10 zones)

TTC traditional town center sign overlay district (B-1, L-1, R-2 on certain streets)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign12 ft48 sq ftNot listedNot listedOne per street frontageOn building wallNot listedUnlockSec. 113-9, Table One; Sec. 113-4
Projecting SignUp to 2 ft above roofline; minimum 8 ft above grade12 sq ft4 ft projection from wallNot listedNot listedPerpendicular to wall, or under soffit/overhangNot listedUnlockSec. 113-9, Table One; Sec. 113-1 (Projecting sign definition)
Freestanding Sign6 ft16 sq ftNot listed1 ft from property line; clear vision area neededOne per siteOn property frontage facing streetNot listedUnlockSec. 113-9, Table One; Notes c/d
Auxiliary Sign (Wall or Freestanding)4 ft6 sq ftNot listedNot listedNot listedOn building wall or separate freestanding structureNot listedUnlockSec. 113-9, Table One
Portable SignNot listed6 sq ftNot listedNot listedOne per parcelOn parcel without freestanding sign; may be in right-of-way with encroachment permitNot listedUnlockSec. 113-14(a)

CB community business sign overlay district (B-1)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed100 sq ftNot listedNot listedOne per street frontageOn building wallNot listedUnlockSec. 113-9, Table One; Sec. 113-4
Freestanding Sign12 ft60 sq ftNot listed1 ft setback; clear vision areaOne per siteOn property frontageNot listedUnlockSec. 113-9, Table One; Notes c/d
Auxiliary Sign (Wall or Freestanding)4 ft6 sq ftNot listedNot listedNot listedOn building wall or separate freestanding structureNot listedUnlockSec. 113-9, Table One
Portable/Balloon SignNot listed30 sq ftNot listedNot listedOne per parcelOn parcelNot listedUnlockSec. 113-14(b)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Service Area Canopy SignNot listed25 sq ft per canopy edge facing streetNot listedNot listedNot listedEach edge of service area canopy facing streetNot listedUnlockSec. 113-11(a)
Awning or Sun Canopy SignNo part <8 ft or >12 ft above gradeNot listedNot listedNot listedNot listedOn awning/canopyNot listedUnlockSec. 113-11(b)
Subdivision Identification Sign5 ft32 sq ftNot listedNot listedOne per entranceAt entrance of subdivision, in outlotsNot listedUnlockSec. 113-11(d)
Banner (Building Frontage < 400 linear ft)Not listed40 sq ftNot listedNot listedMax 2 per businessAffixed to principal/accessory building or structure; not above cornice/parapetNot listedUnlockSec.113-13(a)-(d)
Banner (Building Frontage >= 400 linear ft)Not listed7% of wall area, up to a max 200 sq ftNot listedNot listedMax 2 per businessAffixed to principal/accessory building or structure; not above cornice/parapetNot listedUnlockSec.113-13(b)-(d)

PermitPal covers all 10 zoning districts in Rogers. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Rogers

  • Signs with moving or swinging parts, except for projection signage.
  • Flashing signs, except when used to provide primarily time and temperature or other public service information and not to exceed 25 percent of the area of the sign face.
  • Roof signs, a sign mounted on the roof of a building or on a parapet wall.
  • Off-premises, billboard or advertising signs, or any sign that directs attention to a business, service, product or event not related to or on the premises where the sign is located, except as permitted in the SI special industrial zoning district and through sections 113-13 and 113-14.
  • Any sign not constructed, wired, assembled, attached or supported in conformance with applicable building or other codes and regulations.
  • Pennants, streamers, strings of lights, searchlights, flags of other than a political jurisdiction, beacons or any other similar signs, except as permitted through sections 113-13 and 113-14.
  • Any sign not specifically permitted in this chapter.
  • Any signage placed in the right-of-way will be immediately removed by the city, and no reimbursement will be given for damage.
  • Backlighting is not a permitted method of sign illumination.
  • Signage on a single pole is prohibited.
  • Signs on wheels and signage on trucks or other vehicles that are not parked in a parking lot or that are parked for the sole purpose of off-site advertising are prohibited.

Exempt Signs in Rogers

  • Official public notices or warning signs required by local, state or federal law, including, but not limited to, traffic control and other regulatory purpose signs.
  • Any sign located inside a building that is not legible from more than three feet beyond the property line of the parcel or lot the sign is located on.
  • Religious symbols or works of art that do not contain a commercial message.
  • Any temporary for sale or for rent sign that advertises the sale or rental of personal property or residential premises upon which the sign is located, as long as the sign is not illuminated and does not exceed 24 square feet in area or four feet in height, or the height permitted for an auxiliary sign in that sign district, if greater.
  • Any political or noncommercial sign in compliance with the standards of Minn. Stats. § 211B.045, and any political or noncommercial sign in the residential or residential, multifamily and institutional sign overlay districts outside of the regulated period, provided such signs do not exceed six square feet, not extending more than six feet above grade at the base and limited to one wall sign or freestanding sign per street frontage. In all other sign overlay districts, any sign display or device allowed under this section may contain any otherwise lawful political or noncommercial message that does not direct attention to a business operated for profit, or to a commodity or service for sale, and that complies with the size, height and lighting requirements of this section.
  • Any sign placed within the right-of-way of a roadway with the permission and approval of the roadway authority.
  • Any nonilluminated project information sign not exceeding 64 square feet in area and 12 feet in height and removed upon building occupancy.

Sign Plan & Submission Notes for Rogers

  • Adjustments to the requirements and standards for the height, number, type, lighting, area or location of a sign or signs may be approved through the site plan review process, provided certain criteria are met (Sec. 113-12).
  • Proposed changes to sign allowances beyond the scope of permitted adjustments must be processed according to the variance or planned unit development requirements of the zoning ordinances (Sec. 113-12(d)).
  • Sign permit is required for painting, construction, erection, remodeling, relocation, or expansion of any sign (Sec. 113-7), except for routine maintenance.
  • A temporary permit application and a map of signage locations are required for certain types of off-premises temporary signage (Sec. 113-14(f)(3)).

Source: municode municipal code