Questions? Call us at (262) 218-2915

Sign Regulations in Picayune, Mississippi

Picayune, Mississippi has specific sign regulations covering 29 sign types across 6 zoning districts. Regulated sign types include Business Sign (Wall, Freestanding, etc.), Wall Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Picayune, Mississippi

Sample Sign Requirements in Picayune

Sign TypeMax AreaSetback
Billboard672 sq ft or maximum as allowed by MDOTSee 1003.4 for A-1; elsewhere not nearer than one-third of required setback or 10 ft, whichever greater.
Digital Advertising Sign250 sq ftNot listed
Directional or Informational Sign - Public/Quasi-public6 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for PicayuneFull Coverage

Sign Types Covered

29

  • Business Sign (Wall, Freestanding, etc.)
  • Wall Sign
  • Projecting Sign
  • Lighting Devices
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Picayune

City WebsiteMunicipal Code1 permit application link available

Picayune, Mississippi Sign Rules at a Glance

Picayune, Mississippi regulates 29 sign types across 6 zoning districts. Traffic/Intra-site Directional Signs in the Office/Professional District are capped at 31 in above existing grade, set back at least 1 ft from right-of-way. Most commercial signs in Picayune require a permit.

Detailed Sign Ordinance Requirements for Picayune, Mississippi

Sign Rules by Zoning District in Picayune (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
General Regulations For All Zones7Not listed672 sq ft or maximum as allowed by MDOT
R-1, R-2, R-3, M-17Maximum 15 ft, minimum 2 ft above ground60 sq ft
C-1, C-33Not listedNo sign > 150 sq ft; total signs per building/lot max 300 sq ft
C-23Not listed6 sq ft per 1 ft of lot frontage
A-1, I-1, I-22Not listed10 sq ft per linear foot of lot frontage
Office/Professional District8Max 31 in above existing gradeEnter/Exit: 216 sq in per face; Intra-site: 26 in x 15 in per face

Zone-by-Zone Sign Requirements in Picayune(sample of 3 of 6 zones)

General Regulations For All Zones

Sign TypeMax AreaSetbackLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listedNot listedAttached flat and parallel to the exterior of wall or screening surface of a building; may project up to 15 inches over public property.Unlock1003.1, 1003.3, 1003.5, 1003.13
Projecting SignNot listedNot listedProjecting from building wall.Unlock1003.3, 1003.13
Lighting DevicesNot listedNot listedOver public property.Unlock1003.3
Billboard672 sq ft or maximum as allowed by MDOTSee 1003.4 for A-1; elsewhere not nearer than one-third of required setback or 10 ft, whichever greater.Permitted only along Interstate 59 as permitted by MDOT.Unlock1002.1, 1003.11, 1003.13
Digital Advertising Sign250 sq ftNot listedWith approval of director of planning and zoning and code enforcement. Not in R-1, R-2, R-3, R-4, M-1, C-2 zones.Unlock1002.2, 1003.12, 1003.13
Temporary Sign - Public EventNot listedNot listedNot listedUnlock1003.7
Directional or Informational Sign - Public/Quasi-public6 sq ftNot listedAny district on city inspection officer's approval.Unlock1003.6

R-1, R-2, R-3, M-1

Sign TypeMax HeightMax AreaSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Permanent Sign - Name/AddressNot listed6 sq ftNot listedLand or building to which the sign refersUnlock1004.1
Temporary Sign - For Lease or SaleNot listed12 sq ftNot listedOn building/property offered for lease/sale.Unlock1004.2
Temporary Sign - Subdivision DevelopmentMaximum 15 ft, minimum 2 ft above ground60 sq ftNot listedAt dedicated street entrances to new subdivision development of lots or more.Unlock1004.3
Construction Identification SignMaximum 15 ft, minimum 2 ft above ground12 sq ftOne per constructionOn property with construction of building.Unlock1004.4
Institution Identification Sign (Church, School, etc.)Not listed30 sq ftOne per institutionAttached to or on property of the institution.Unlock1004.5
Directional Sign (Institutional)Not listed2 sq ftOne per major thoroughfare approachFor church, school, hospital, sanatorium, clinic or similar use.Unlock1004.6
Name Plate Sign (Dwelling Group)Not listed6 sq ftOne per dwelling groupFor dwelling group of four or more units.Unlock1004.7

Office/Professional District

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Main Entrance/Other Wall)Not listed40 sq ft or 0.5 sq ft per linear ft (minimum 20 sq ft)Not listedOne per main entrance/wall; more than one sign when more than one entranceFace mounted on building wall containing main entrance/storefront; or other wall in lieu or combination.Unlock1008.3(1), 1008.4(1), 1008.5(1), 1008.6(1), 1008.7
Ground Mounted SignMax 6 ft as measured from grade40 sq ft per face, max 80 sq ft total11 ft from right-of-wayOne per street frontageGround mounted, setback 11 ft from right-of-way.Unlock1008.3(2), 1008.4(2), 1008.5(2,3), 1008.7(6)
Permanent Project SignMax 6 ft as measured from grade50 sq ft per face; total sign area not to exceed 200 sq ft11 ft from right-of-wayOne per street frontage (for eligible projects)Setback 11 ft from right-of-way.Unlock1008.3(3), 1008.4(3), 1008.5(4), 1008.6(3)
Traffic/Intra-site Directional SignMax 31 in above existing gradeEnter/Exit: 216 sq in per face; Intra-site: 26 in x 15 in per faceMin 1 ft from right-of-wayTwo per vehicular entranceMin 1 ft from right-of-way.Unlock1008.3(4), 1008.4(4), 1008.5(5), 1008.6(5)
Canopy SignNot listedSame as wall/ground sign (in combination)Not listedNot listedOn canopy.Unlock1008.3(5), 1008.4(5), 1008.5(6), 1008.6(6), 1008.7
Multi-tenant SignNot listedFollows ground mounted sign: 40 sq ft per face, 80 sq ft total11 ft from right-of-wayOne per street frontageAttached to main ground sign.Unlock1008.3(2b), 1008.4(6), 1008.6(7), 1008.10(3)
Commemorative Wall-mounted SignNot listed192 sq inNot listed1 per building/lotWall of building/lot.Unlock1008.3(6), 1008.4(7), 1008.5(8)
Window SignNot listedNot listedNot listedNot listedPainted or posted in window, visible from public right-of-way.Unlock1002.18, 1008.2

PermitPal covers all 6 zoning districts in Picayune. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Picayune

  • No sign shall be erected so as to prevent free ingress or egress from any door, window, or fire escape, and no sign of any kind shall be attached to a stand-pipe or fire escape.
  • No sign shall be erected at street intersections in a manner that obstructs free and clear vision, or at any location where its position may interfere with or obstruct the view of traffic sight lines or traffic control devices.
  • No flashing or intermittent blue, red, green, or amber illumination shall be used on signs.
  • Portable signs are prohibited.
  • Billboards are not allowed in the corporate limits of the City except those permitted by the Mississippi Department of Transportation along Interstate 59.
  • No digital signs are to be placed in R1, R2, R3, R4, M1, or C2 zoning districts.
  • Signs which are not securely affixed to the ground, or otherwise affixed in a permanent manner to an approved supporting structure, including portable signs (including sign conversions), are prohibited.
  • No sign shall be erected or displayed in such a manner as to obstruct the free and clear vision of vehicle drivers, or in any location where it may interfere with, obstruct the view of, or be confused with any authorized traffic/government sign, signal, or device, or any other words, phrases, symbols or characters in such manner as to interfere with, mislead, or confuse traffic.
  • Animated signs are prohibited.
  • Flashing signs having intermittent or animated illumination or moving parts are prohibited. No signs shall have lights that imitate or resemble official emergency vehicle or traffic signals.
  • Use of portable and/or flashing signs, with or without changeable copy board attached, is declared a public nuisance and prohibited.
  • No sign shall be placed without first submitting a picture showing dimensions and completing an application for a permit in the planning and zoning department.

Exempt Signs in Picayune

  • Official, traffic, and street signs are exempt from the general sign regulations.
  • Directional or informational signs of a public or quasipublic nature not exceeding six square feet in area may be permitted in any district on approval of the city inspection officer, provided any illumination is non-flashing, uncolored and confined to the face of the sign. No advertising matter whatsoever shall be permitted on signs of this type.
  • Temporary signs indicating an event of public interest, such as state or local fair, local or general election, cattle or horse show, etc., may be erected on a thirty-day (30) non-renewable permit on approval of the city code enforcement officer.

Sign Plan & Submission Notes for Picayune

  • No sign shall be placed without first submitting a picture showing dimensions and completing an application for a permit in the planning and zoning department.
  • All digital sign locations must first be approved by the director of planning and zoning and code enforcement.
  • In office parks, strip plazas, shopping centers, or other grouping of five or more tenants or establishments, the developer shall prepare a set of sign standards for all exterior signs to be approved by the city's planning commission. Sign permits shall not be issued until the planning commission has approved the sign standards.
  • Where the front footage of a building would allow for more than the maximum wall sign as stated, additional square footage may be allowed upon approval by the planning commission.
  • The planning commission may vary maximum wall sign square footage allowed where a building frontage is less than 100 linear feet.
  • Sign permits shall be issued by the building official; if the number and/or location of signs constitute a traffic hazard, nuisance, or infringement upon the rights of an adjacent property owner, permits may be withheld.
  • The planning commission will review standards considering size, colors, materials, styles of lettering, appearance of any logo, type of illumination, and location before approving sign permits in projects requiring sign standards.
  • Any request for a variance must be reviewed by the planning commission, based on specific findings and evidence.

Source: municode municipal code

Frequently Asked Questions

In Picayune, the height limit for Traffic/Intra-site Directional Sign in the Office/Professional District is 31 in above existing grade. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Picayune require a permit. From the submission notes on this page: No sign shall be placed without first submitting a picture showing dimensions and completing an application for a permit in the planning and zoning department. Run a code check for an exact address to see the permit requirements for that zone.

Picayune's sign code covers 29 sign types, including Business Sign (Wall, Freestanding, etc.), Wall Sign, Projecting Sign, and Lighting Devices. Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: Temporary signs indicating an event of public interest, such as state or local fair, local or general election, cattle or horse show, etc., may be erected on a thirty-day (30) non-renewable permit on approval of the city code enforcement officer. The full list is on this page.

In Picayune, Ground Mounted Sign in the Office/Professional District must be set back 11 ft from right-of-way. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Picayune's sign ordinance that cover digital, changing, or flashing signs: No digital signs are to be placed in R1, R2, R3, R4, M1, or C2 zoning districts. Animated signs are prohibited. Flashing signs having intermittent or animated illumination or moving parts are prohibited. No signs shall have lights that imitate or resemble official emergency vehicle or traffic signals. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Picayune Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Picayune, Mississippi, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds