Sign Regulations in Ridgeland, Mississippi
Ridgeland, Mississippi has specific sign regulations covering 42 sign types across 7 zoning districts. Regulated sign types include Wall Sign, Ground Sign (2 Lane), Ground Sign (3 Lane). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: September 19, 2025
Sign Regulation Overview for Ridgeland, Mississippi
Sample Sign Requirements in Ridgeland
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign | Cannot be higher than the roof line or facade | 150 sq. ft. (can increase up to 300 sq. ft. with Architectural Review Board approval) | — |
| Ground Sign (2 Lane) | 8 ft. | 32 sq. ft. | 5 ft. minimum from right-of-way |
| Ground Sign (3 Lane) | 10 ft. | 40 sq. ft. | 5 ft. minimum from right-of-way |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
42
- Wall Sign
- Ground Sign (2 Lane)
- Ground Sign (3 Lane)
- Ground Sign (4 Lanes or More)
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Ridgeland
Other Cities in Mississippi
Frequently Asked Questions
In Ridgeland, wall signs can be up to Cannot be higher than the roof line or facade. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.
To get a sign permit in Ridgeland, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Ridgeland, regulated sign types include Wall Sign, Ground Sign (2 Lane), Ground Sign (3 Lane), Ground Sign (4 Lanes or More), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Ridgeland vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Ridgeland are regulated with specific requirements for brightness, animation, and message duration. Ridgeland has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Ridgeland Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Ridgeland, Mississippi sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Ridgeland, Mississippi Sign Rules at a Glance
Ridgeland, Mississippi regulates 42 sign types across 7 zoning districts. Real Estate Sign (Residential)s in the General Regulations For All Zones zoning district are capped at 5 ft. tall, 6 sq. ft. per face (max 2 faces, single plane), and 2 ft. x 3 ft. wide, with a 5 ft. from curb/edge or outside right-of-way setback (Sec. Section III.K.2). Most commercial signs in Ridgeland require a permit.
Detailed Sign Ordinance Requirements for Ridgeland, Mississippi
Sign Rules by Zoning District in Ridgeland (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 10 | 40 ft. | 160 sq. ft. | — |
| A-1 Agricultural District, R-EA Residential Estate Zoning District, R-E Residential Estate Zoning District, R-1A Single-Family Residential District, R-1 Single-Family Residential District, R-2 Single-Family Residential District, R-3 Single-Family Residential District, R-4 Zero Lot Line Residential District, R-4A Townhouse Residential District, R-5 Multi-Family Residential District, R-M Mobile Home Park District, PURD Planned Unit Residential Development District, GW-1 Greenway District, Residential Districts | 5 | 8 ft. | 32 sq. ft. | — |
| Civic Organizations (All Zones) | 10 | 15 ft. above average grade | Combined max 150 sq. ft. for two wall signs | — |
| Office Districts, Commercial Districts, Industrial Districts, I-1 Limited Industrial District, I-2 Heavy Industrial District, TIP Technical Industrial Park District, C-1 Low-Intensity Commercial District, C-2 General Commercial District, C-2A General Commercial District (Arterial Streets), C-3 Convenience Commercial District, C-4 Highway Commercial District, C-5 High Intensity Commercial District | 6 | 15 ft. (one sign may be 30 ft. height by special approval) | 150 sq. ft. (may be increased to 300 sq. ft. with ARB approval) | — |
| Campus Environment Office/Commercial/Industrial Project | 7 | 12 ft. | 72 sq. ft. per face | — |
| Multi-Story Office Building | 3 | — | 4 sq. ft. | — |
| OARC Old Agency Road Corridor, S-1 Special Use District, MU-1 Mixed Use District, CUO Controlled Use Overlay District, CPOD Commerce Park Overlay District, C-6 Regional Shopping Mall District, Regional Retail Center (C-6), Shopping Centers, Strip Plaza, Office Parks | 1 | 15 ft. (or up to 30 ft. with ARB/Mayor approval) | 8 ft. width; 15 ft. height (or up to 30 ft. by special approval) | — |
Zone-by-Zone Sign Requirements in Ridgeland(sample of 3 of 7 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Cannot be higher than the roof line or facade | 150 sq. ft. (can increase up to 300 sq. ft. with Architectural Review Board approval) | — | — | One wall sign per street frontage (multiple elevations possible per formula) | May be placed on any building elevation as long as not exceeding calculation for the elevation | — | Unlock | Section III.B Wall Signs |
| Ground Sign (2 Lane) | 8 ft. | 32 sq. ft. | — | 5 ft. minimum from right-of-way | One per front yard | Yard for street on which sign fronts | — | Unlock | Section III.C, Appendix A |
| Ground Sign (3 Lane) | 10 ft. | 40 sq. ft. | — | 5 ft. minimum from right-of-way | One per front yard | Yard for street on which sign fronts | — | Unlock | Section III.C, Appendix A |
| Ground Sign (4 Lanes or More) | 12 ft. | 50 sq. ft. | — | 5 ft. minimum from right-of-way | One per front yard | Yard for street on which sign fronts | — | Unlock | Section III.C, Appendix A |
| Construction Sign (Commercial/Industrial) | 8 ft. | 32 sq. ft. per side (two-sided) | — | 15 ft. from curb/edge or outside right-of-way | One per premises during construction | On-premises only | — | Unlock | Section III.J.1 |
| Construction Sign (Single-family/Residential) | 5 ft. | 9 sq. ft. (single-family/duplex); 32 sq. ft. (multi-family, subdivisions) | — | 5 ft. from curb/edge or outside right-of-way | One per premises during construction | On-premises only | — | Unlock | Section III.J.2 |
| Real Estate Sign (Commercial/Industrial) | 5 ft. | 20 sq. ft. | — | 10 ft. from curb/edge or outside right-of-way | One per premises | On-premises only | — | Unlock | Section III.K.1 |
| Real Estate Sign (Residential) | 5 ft. | 6 sq. ft. per face (max 2 faces, single plane) | 2 ft. x 3 ft. | 5 ft. from curb/edge or outside right-of-way | One per premises | On-premises only | — | Unlock | Section III.K.2 |
Civic Organizations (All Zones)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign (Civic) | 8 ft. | 48 sq. ft. | — | 5 ft. minimum | One per location | On-premises, at least 5 ft from curb/pavement/right-of-way | — | Unlock | Section V.B |
| Wall Sign (Civic) | — | 48 sq. ft. | — | — | One per street-facing side | Building face(s) with street frontage | — | Unlock | Section V.C |
| Changeable Copy Sign (Manual) - Ground | 8 ft. | 48 sq. ft. | — | — | One per location | On-premises, in lieu of ground sign | — | Unlock | Section V.D |
| Directional Sign (Civic, Off-premises) | 6 ft. | 6 sq. ft. | — | — | Two | Off-premises | — | Unlock | Section V.E |
| Temporary Sign (Civic, Event) | 6 ft. | 32 sq. ft. | — | 10 ft. minimum | One per street frontage | On-premises, minimum 10 ft setback from right-of-way | — | Unlock | Section V.F |
| School Ground Sign | — | — | — | — | One per entrance | One ground sign per entrance, may be changeable copy sign | — | Unlock | Section V.G |
| Athletic Field Fence Sign | Not to exceed height of fence/wall; max 10 ft. | 32 sq. ft. | — | — | Unlimited per field (subject to standard), max 2 scoreboards per field | On or off premises, playing field side of fence/wall | — | Unlock | Section V.H |
| Athletic Field Scoreboard | 15 ft. above average grade | — | — | — | Max 2 per field | Athletic field | — | Unlock | Section V.H |
Campus Environment Office/Commercial/Industrial Project
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Project Sign (Ground) | — | — | — | — | Two (or three for median entrance) | Project entrance | — | Unlock | Section IV.E.1 |
| Ground Address Sign (Building) | 5 ft. | Max 5 ft. height, max 5 ft. width | 5 ft. | — | One per building | Out of right-of-way, at each building | — | Unlock | Section IV.E.2 |
| Exterior Directory Sign (Building < 50,000 sq. ft.) | 6 ft. | 15 sq. ft. per face | — | 15 ft. minimum | One per main entrance | Near main entrance | — | Unlock | Section IV.E.3.a |
| Exterior Directory Sign (Building > 50,000 sq. ft.) | 12 ft. | 72 sq. ft. per face | — | 15 ft. minimum | One per building | Near main entrance | — | Unlock | Section IV.E.3.b |
| Identification Sign (Single tenant building) | 6 ft. | See directory maximums for sign area per face; not to exceed values in IV.E.3 | — | 10 ft. minimum (or median placement outside setback) | One per single tenant building | Ground exterior, near entrance | — | Unlock | Section IV.E.4 |
| Wall Sign (Identification) | — | — | — | — | One per street frontage | On building elevation facing public street | — | Unlock | Section IV.E.5 |
| Numerical Identification (Building) | — | 16 sq. ft. per face | — | — | One per building | Exterior of building | — | Unlock | Section IV.E.6 |
PermitPal covers all 7 zoning districts in Ridgeland — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.
See all 7 zones for Ridgeland — start freeProhibited Signs in Ridgeland
- Animated signs are prohibited.
- Flashing signs having intermittent or animated illumination or moving parts are prohibited; signs shall not have lights which imitate or resemble official emergency vehicle or traffic signs or signals.
- Strips or strings of lights, banners, flags, balloons or pennants outlining property lines, sales areas, roof lines, doors, windows, wall edges, or other architectural features of a building, which are not a part of the original structure, are prohibited (except Christmas lights between Thanksgiving and New Year's Day).
- Signs on public property are prohibited, except those erected at the direction of and with permission of the public authority having jurisdiction.
- Signs which are not securely affixed to the ground or otherwise affixed in a permanent manner to an approved supporting structure, including portable signs (including sign conversions), are prohibited.
- No sign or other device regulated by this Ordinance shall be erected or displayed so as to obstruct the vision of vehicle drivers, interfere with or be confused with traffic/government signs, or use words/symbols that may mislead or confuse traffic.
- Signs which contain reflective materials and present a hazard or danger to traffic or the public are prohibited.
- Signs which exhibit more than two (2) faces are prohibited.
- Off-premises signs are prohibited, except outdoor advertising signs that were erected as of the effective date of this Ordinance.
- Outdoor Advertising Signs (Billboards) are prohibited (except as non-conforming signs).
- Signs which contain obscene, indecent, or immoral content are prohibited.
- Beacon or strobe lights are prohibited.
- Signs which are structurally unsound or rendered structurally sound by guy wires or unapproved facing/bracing are prohibited.
- No sign shall be placed on a vehicle or trailer that is parked or located primarily to display the sign (except buses, taxis, or vehicles operating during normal business).
- Pole signs with poles greater than three (3) feet in height are prohibited, except outdoor advertising signs and signs in the interstate zone.
- Signs installed, erected, enlarged, or structurally altered in violation of this Ordinance are prohibited.
- Signs erected on or that project above a roof line or above the face of flat roofed buildings (i.e., roof signs) are prohibited.
- Changeable copy signs (manual) that do not have locked, vandal-proof cover (if required by the Building Official) are prohibited.
- Signs which obstruct any window, door, fire escape, stairway or opening for air, ingress, or egress, are prohibited, if required by the Building Official.
- No sign or advertising device may be erected on, placed on, projected, or overhang any right-of-way, walkway, street, alley, or easement.
- Tacking, painting, posting, or affixing of signs, posters, or advertising devices to trees, fences, rocks, utility poles, etc. is prohibited.
- Structures not meeting construction standards, advertising of defunct businesses, and signs/structures erected without a permit are prohibited.
- Signs illegal under federal or state laws/regulations are prohibited.
- All signs not expressly permitted by this ordinance or any other ordinance of the City of Ridgeland are prohibited.
Exempt Signs in Ridgeland
- Official public notices and notices posted by public officers in the performance of their duties.
- Governmental signs for the control or direction of traffic and other regulatory purposes.
- Flags or emblems of the United States, the State of Mississippi, any other state or nation or their political subdivisions, or any institution of higher learning, subject to area and height limits and flown in accordance with protocol. Flags flown or displayed for commercial purposes are not exempt.
- Memorial plaques, cornerstones, historical tablets, and the like.
- Signs not visible off the lot upon which they are situated, such as drive-up menu boards at fast food facilities.
- Signs posted in conjunction with door bells or mailboxes, none exceeding thirty-six (36) square inches in surface area.
- Small, illuminated or non-illuminated instructional signs, none exceeding four (4) square feet in surface area.
- Address signs, one per street frontage per principal use, none exceeding seventy-two (72) square inches, showing only the numerical address designation.
- Decals, numerals, names, addresses, hours, credit information, etc., attached to doors or windows and occupying a total area of one (1) square foot or less.
- Political signs.
- Special celebration displays (excluding Christmas displays covered elsewhere), without commercial symbols, emblems, or messages, allowed for a period beginning 21 days before and ending 2 days after the celebration; display area limited to the front yard of a commercial business, not allowed in public right-of-way; no animated signs; inflatable displays up to 12 feet allowed; no sign permit required.
Sign Plan & Submission Notes for Ridgeland
- All permanent signs require a permit prior to erection, alteration, or relocation unless specifically exempted.
- Sign design for any new sign is subject to review and approval by the Director of Community Development or their designated representative; appeals go to the Architectural Review Board.
- Private Sign Standards are required for office parks, strip plazas, shopping centers, or other groupings of five or more tenants or establishments; these must be prepared by the developer and approved by the Architectural Review Board before any sign permit is issued. All businesses under this section must submit private sign standards within ninety (90) days after the effective date of the Ordinance.
- The Architectural Review Board must approve sign standards and additional signage for multi-story office buildings if private sign standards are submitted.
- Subdivision or other partition of a developed site does not exempt projects from complying with sign regulations, including sign standards.
- Entrance signs for a regional retail center that exceed standard parameters require submission of a site plan to the Mayor and Board of Aldermen and a finding that the sign is not inconsistent with Ordinance purposes.
- Development signs (temporary off-premises for subdivisions) in residential districts require Architectural Review Board approval regarding location, setback, copy, lighting, and design and must be requested with the site review request.
- Athletic field signs for civic organizations must be governed by submitted sign standards approved by the Architectural Review Board before a permit is issued.
- Any proposed change, repair, or maintenance to a non-conforming sign that amounts to more than fifty percent (50%) of the current market value of the sign requires the sign to be brought into compliance with the ordinance.
- Variance requests related to signage are heard by the Architectural Review Board. Prohibited signs cannot be granted variances.
- Applications for sign permits must include drawings showing design, location, materials, finishes, and colors, plus other information as required by the City.
Source: other municipal code