Questions? Call us at (262) 218-2915

Sign Regulations in Salem Town, New Hampshire

Salem Town, New Hampshire has specific sign regulations covering 19 sign types across 5 zoning districts. Regulated sign types include Freestanding Sign, Identification Sign (Multifamily or Multi-Unit), Identification Sign (Nonresidential Use). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Salem Town, New Hampshire

Sample Sign Requirements in Salem Town

Sign TypeMax HeightMax AreaSetback
Identification Sign (Multifamily or Multi-Unit)6 ft12 sq ft30 ft
Identification Sign (Nonresidential Use)6 ft16 sq ft30 ft
Freestanding Subdivision Identification Sign5 ft20 sq ftMinimum 5 ft from right-of-way

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Salem TownFull Coverage

Sign Types Covered

19

  • Freestanding Sign
  • Identification Sign (Multifamily or Multi-Unit)
  • Identification Sign (Nonresidential Use)
  • Freestanding Subdivision Identification Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Salem Town

Municipal Code4 permit application links available

Frequently Asked Questions

In Salem Town, the height limit for Freestanding Subdivision Identification Sign in the Residential District and other zoning districts is 5 ft (Sec. 490-702D(1)(d)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Salem Town require a permit. From the submission notes on this page: The application for a sign permit must be accompanied by a sketch plan of the site and elevation drawings of the proposed sign, caption of the proposed sign, and other pertinent data. Run a code check for an exact address to see the permit requirements for that zone.

Salem Town's sign code covers 19 sign types, including Freestanding Sign, Identification Sign (Multifamily or Multi-Unit), Identification Sign (Nonresidential Use), and Freestanding Subdivision Identification Sign. Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: No sign permit is necessary for sign repair and maintenance. The full list is on this page.

In Salem Town, Freestanding Subdivision Identification Sign in the Residential District and other zoning districts must be set back at least 5 ft from right-of-way (Sec. 490-702D(1)(d)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Salem Town's sign ordinance that cover digital, changing, or flashing signs: Animated, moving, flashing, and intensely lighted signs and signs that emit audible sound, noise, or visible matter, including scrolling, flashing, or repeating messages, images, or displays, are prohibited. Electronic reader boards and electronic changeable copy signs are prohibited, except for specific static electronic price-change signs for gas stations and digital screens along drive-through lanes with Planning Board approval. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Salem Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Salem Town, New Hampshire, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Salem Town, New Hampshire Sign Rules at a Glance

Salem Town, New Hampshire regulates 19 sign types across 5 zoning districts. Freestanding Subdivision Identification Signs in the Residential District and other zoning districts are capped at 5 ft tall and 20 sq ft, set back at least 5 ft from right-of-way (Sec. 490-702D(1)(d)). Most commercial signs in Salem Town require a permit.

Detailed Sign Ordinance Requirements for Salem Town, New Hampshire

Sign Rules by Zoning District in Salem Town (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential District, Rural District, Recreational District, Garden Apartment District36 ft20 sq ftNot listed
Commercial-Industrial District, Business Office District, Industrial District, Limited Community Shopping District96 ftUp to 100 sq ft (typical); area may be reduced if setback reducedNot listed
Business Office I District2Not listedUp to 100 sq ft (typical); area may be reduced if setback reducedNot listed
Industrial or Office Park Development1less than 6 ft24 sq ftNot listed
General Regulations For All Zones53 ft20 sq ft total per lot (Residential/Rural); 32 sq ft total per lot (other districts)Not listed

Zone-by-Zone Sign Requirements in Salem Town(sample of 3 of 5 zones)

Residential District, Rural District, Recreational District, Garden Apartment District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Identification Sign (Multifamily or Multi-Unit)6 ft12 sq ftNot listed30 ftOne per structurePainted on/flat against building facade or detached, 30 ft setbackNot listedUnlock§ 490-702D(1)(a), (c); § 490-702C
Identification Sign (Nonresidential Use)6 ft16 sq ftNot listed30 ftOne per usePainted on/flat against building facade or detached, 30 ft setbackNot listedUnlock§ 490-702D(1)(b), (c); § 490-702C
Freestanding Subdivision Identification Sign5 ft20 sq ftNot listedMinimum 5 ft from right-of-wayOne per entranceAt each subdivision entrance, min 5 ft setback from right-of-way, not in public right-of-wayNot listedUnlock§ 490-702D(1)(d)

Commercial-Industrial District, Business Office District, Industrial District, Limited Community Shopping District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding SignNot specified (see Table)Up to 100 sq ft (typical); area may be reduced if setback reducedNot listedTypically 15 ft, may be reduced to 10 ft if area reduced 50%Based on Table of Permitted Signs and number of street frontagesOn property, perpendicular to road; 10 ft minimum setback if area reduced 50%, otherwise per TableNot listedUnlock§ 490-702D(2)(a) [1]-[7]
Wall SignNot listedSee Table (by building frontage); businesses without street frontage: max 15 sq ftNot listedNot listedSee Table of Permitted SignsOn building wall facing public right-of-way or parking/courtyardNot listedUnlock§ 490-702D(2)(b), (i)
Roof SignNot listedNot listedNot listedNot listedNot listedOn roof, at least 4 ft from all outside wallsNot listedUnlock§ 490-702D(2)(c), (i)
Projecting SignNot listedNot listedNot listedNot listedOneInstead of, not in addition to, a freestanding signNot listedUnlock§ 490-702D(2)(d), (i)
Commercial Temporary Sign - Poster or BannerNot listed20 sq ftNot listedNot listedOne at a timeOn building, wall, or existing freestanding signNot listedUnlock§ 490-702D(2)(f)[1], [2]
Commercial Temporary Sign - A-frame/Sandwich Board3 ft9 sq ftNot listedNot listedOne at a timeOn propertyNot listedUnlock§ 490-702D(2)(f)[1], [2]
Commercial Temporary Sign - Flag Sign6 ftNot listed2 ft5 ft from property lineOne at a timeOn property, at least 5 ft from property lineNot listedUnlock§ 490-702D(2)(f)[1], [2]
Directional SignNot listed4 sq ftNot listedNot listedOne per driveway pathNear each driveway path (lane)Not listedUnlock§ 490-702D(2)(h)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Real Estate SignNot listed6 sq ft (Residential, Rural, Recreational); 20 sq ft (all other districts)Not listedNot listedOne per premisesOn premises for sale/rent/leaseNot listedUnlock§ 490-702D(2)(j)[1][a]-[b]
Construction SignNot listed20 sq ft total per lot (Residential/Rural); 32 sq ft total per lot (other districts)Not listedNot listedNot listedOn-premises during constructionNot listedUnlock§ 490-702D(2)(j)[2][a]-[b]
Political SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 490-702D(2)(j)[3]
Nameplate (Residential Use)Not listed4 sq ft per single-family residence, 8 sq ft per duplexNot listedNot listedNot listedOn building or entryNot listedUnlock§ 490-702D(2)(j)[4]
Temporary Event Sign (Qualifying Event)3 ft9 sq ftNot listedNot listed2 per property at one timeOn private property, at grade, not in right-of-way or on Town propertyNot listedUnlock§ 490-702D(2)(k)[1]-[8]

PermitPal covers all 5 zoning districts in Salem Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Salem Town

  • No person shall place on or affix any sign to any public property, including highway rights-of-way, or private property without the owner's consent.
  • No person shall affix, attach, or display any sign upon any object of nature, utility pole, or highway sign.
  • Animated, moving, flashing, and intensely lighted signs and signs that emit audible sound, noise, or visible matter, including scrolling, flashing, or repeating messages, images, or displays, are prohibited.
  • Electronic reader boards and electronic changeable copy signs are prohibited, except for specific static electronic price-change signs for gas stations and digital screens along drive-through lanes with Planning Board approval.
  • Off-site signs and billboard signs are prohibited.
  • Parking of vehicles or trailers with signs or advertising devices for basic advertisement purposes on public right-of-way, public property, or on private property visible from the public right-of-way is prohibited.
  • Signs located on public property or over or across any public street or right-of-way are prohibited unless special permission is granted by the Board of Selectmen.
  • Pennants, searchlights, twirling signs, balloons or other gas-filled figures, and outdoor display of products in parking lots or landscaped areas (unless shown on an approved site plan) are prohibited.
  • Signs which imitate, and may be confused with, an official traffic control sign or signal or an emergency or road equipment vehicle are prohibited.
  • Signs which bear or contain statements, words, or pictures of an obscene, pornographic or immoral character, or contain untruthful advertising matter, or as otherwise prohibited by state law, are prohibited.
  • Fences or any wall which is not structurally a part of a building may not be used for a sign.
  • It is unlawful to affix, attach, or display any advertisement upon any object of nature, utility pole, telephone booth, or highway sign.
  • Signs which block the view of traffic, street signs, or traffic signals or which, due to their placement, inhibit adequate sight distance, are prohibited.

Exempt Signs in Salem Town

  • Signs erected, maintained or approved by the Town of Salem or State of New Hampshire are permitted.
  • Signs that do not obstruct the safe flow of traffic and are placed with the consent of the owner of the land over which the right-of-way passes are permitted, provided the consent applies only to private property, and sign advertising is absolutely prohibited in highway rights-of-way and other public property unless allowed by the Board of Selectmen.
  • No sign permit is necessary for sign repair and maintenance.
  • Signs allowed without permits, provided all other provisions are met, include: real estate signs (with specified size and conditions), construction signs (with specified size and conditions), political signs (which must conform to all state statutes), and nameplates for residential uses (within size limits).

Sign Plan & Submission Notes for Salem Town

  • A permit must be applied for and received from the Building Department prior to erecting, (re)placing, rebuilding, reconstructing, or moving any sign (except for repair or maintenance).
  • The application for a sign permit must be accompanied by a sketch plan of the site and elevation drawings of the proposed sign, caption of the proposed sign, and other pertinent data.
  • All signs shown on an approved site plan may not be altered without Planning Board approval, unless the alteration is only to change a tenant name or is not more intensive and/or obtrusive.
  • Permits are required for certain temporary signs, including some commercial temporary signs and qualifying event signs.
  • Special permission from the Board of Selectmen is required for signs located on public property or over or across any public street or right-of-way, where a public benefit can be ascertained.
  • The Planning Board may grant conditional use permits to modify requirements in certain limited respects if specific criteria are met.

Source: ecode360 municipal code