Sign Regulations in Ringwood Borough, New Jersey
Ringwood Borough, New Jersey has specific sign regulations covering 13 sign types across 5 zoning districts. Regulated sign types include Freestanding Advertising Sign, Promotional Sign, Entrance/Exit Identification Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Ringwood Borough, New Jersey
Sample Sign Requirements in Ringwood Borough
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Advertising Sign | Not listed | 50 square feet | Minimum 25 ft from street line |
| Promotional Sign | 5 ft | 15 square feet (3 ft wide x 5 ft high) | Not listed |
| Entrance/Exit Identification Sign | Not listed | Minimum 6 square feet | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
13
- Freestanding Advertising Sign
- Promotional Sign
- Entrance/Exit Identification Sign
- Advertising Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Ringwood Borough
Other Cities in New Jersey
Frequently Asked Questions
In Ringwood Borough, the height limit for A-frame / Portable Freestanding Sign is 42 inches (Sec. 40-8.7i). Maximum sign heights range from 5 ft to 42 inches across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Ringwood Borough require a permit. From the submission notes on this page: Permit is required for all temporary signs regardless of zone, along with an application, fee, and (if not owner) permission of the property owner. Run a code check for an exact address to see the permit requirements for that zone.
Ringwood Borough's sign code covers 13 sign types, including Freestanding Advertising Sign, Promotional Sign, Entrance/Exit Identification Sign, and Advertising Sign. Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: Temporary signs are permitted in any zone provided a permit has been issued (subject to specific conditions). The full list is on this page.
In Ringwood Borough, Freestanding Advertising Sign in the Motel District must be set back at least 25 ft from street line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Ringwood Borough's sign ordinance that cover digital, changing, or flashing signs: No advertising, flashing, moving or roof sign shall be permitted in any zone in the Borough except upon Borough-owned property as authorized by ordinance. No sign shall be illuminated by means of flashing or noncontinuous illumination. All sign illumination sources shall be completely shielded from the view of vehicular traffic and adjoining land uses. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Ringwood Borough Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Ringwood Borough, New Jersey, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Ringwood Borough, New Jersey Sign Rules at a Glance
Ringwood Borough, New Jersey regulates 13 sign types across 5 zoning districts. Promotional Signs in the Motel District are capped at 5 ft tall and 3 ft wide (Sec. 4-13.15.c). Most commercial signs in Ringwood Borough require a permit.
Detailed Sign Ordinance Requirements for Ringwood Borough, New Jersey
Sign Rules by Zoning District in Ringwood Borough (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Motel District | 2 | 5 ft | 50 square feet | Not listed |
| Extraction Property | 1 | Not listed | Minimum 6 square feet | Not listed |
| Borough-owned Property | 2 | Not listed | No explicit maximum; fee structure applies for under/over 16 sq ft | Not listed |
| Ball Fields (Public Property) | 2 | Not listed | Less than 16 square feet | Not listed |
| General Regulations For All Zones | 6 | 42 inches | 32 square feet | Not listed |
Zone-by-Zone Sign Requirements in Ringwood Borough(sample of 3 of 5 zones)
Motel District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Advertising Sign | Not listed | 50 square feet | Not listed | Minimum 25 ft from street line | One per street frontage | One per street frontage; setback a minimum of 25 ft from the street line. | Not listed | Unlock | § 4-13.15.a, § 4-13.15.b |
| Promotional Sign | 5 ft | 15 square feet (3 ft wide x 5 ft high) | 3 ft | Not listed | One per street frontage | One per street frontage; location established by the Planning Board. | Not listed | Unlock | § 4-13.15.c |
Ball Fields (Public Property)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Advertising Sign (Under 16 sq ft) | Not listed | Less than 16 square feet | Not listed | Not listed | Not listed | Around the perimeter of any ball field (public property) | Not listed | Unlock | § 11-8 |
| Advertising Sign (16 sq ft or larger) | Not listed | Over 16 square feet | Not listed | Not listed | Not listed | Around the perimeter of any ball field (public property) | Not listed | Unlock | § 11-8 |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Handicapped Parking Sign | Not listed | Not listed | Not listed | Not listed | One per handicapped parking space | At each parking space reserved for use by handicapped persons. | Not listed | Unlock | § 7-39.8, § 7-40.6 |
| Directional or Informational Sign | Not listed | 3 square feet | Not listed | Not listed | Not listed | Permitted in all zones. | Not listed | Unlock | § 40-8.7d |
| Temporary Sign | 15 ft (for freestanding temporary signs) | 32 square feet | Not listed | Freestanding signs: ≥10 ft from property or street line. | Not listed | Any zone in the Borough; freestanding not closer than 10 ft to property or street line | Not listed | Unlock | § 40-8.7e, § 40-8.7f |
| A-frame / Portable Freestanding Sign | 42 inches | Not listed | 24 inches | Not listed | 1 per business establishment | Not in vehicular way or within parking area in street ROW. Must be within 10 ft of main business entrance and not in front of different business. | Not listed | Unlock | § 40-8.7i |
| Political Sign (≤10 sq ft) | Not listed | 10 square feet | Not listed | ≥5 ft from paved portion of street | Not listed | Private property | Not listed | Unlock | § 40-8.7A c |
| Political Sign (>10 sq ft and ≤32 sq ft) | Not listed | 32 square feet | Not listed | ≥5 ft from paved portion of street | Not listed | Private property | Not listed | Unlock | § 40-8.7A c |
PermitPal covers all 5 zoning districts in Ringwood Borough. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Ringwood Borough
- No advertising, flashing, moving or roof sign shall be permitted in any zone in the Borough except upon Borough-owned property as authorized by ordinance.
- No revolving signs, flags, or buntings shall be permitted to be displayed on the exterior of any building.
- No part of the sign area of a free-standing sign shall be within 10 feet of the ground surface or located within any sight triangle, except for directional or informational signs not higher than 2.5 feet from the ground surface.
- No sign shall be illuminated by means of flashing or noncontinuous illumination. All sign illumination sources shall be completely shielded from the view of vehicular traffic and adjoining land uses.
- No illuminated sign shall diminish or detract from any traffic signal or warning device.
- No signs shall be erected in such places or in such a manner as will contravene existing laws of the State of New Jersey.
- No streamers, banners, bunting or similar devices shall be permitted in any zone except as temporary signs as allowed under temporary sign regulations.
- Permitted portable A-frame or freestanding signs are prohibited from being placed in the vehicular traveled way or within any parking area located within the street right-of-way.
- Permitted portable A-frame or freestanding signs shall not obstruct building ingress/egress or require a clear traveled way width of less than 48 inches.
- Permitted portable A-frame or freestanding signs shall not be permanently affixed and must be capable of removal daily.
- Permitted portable A-frame or freestanding signs shall not be chained, cabled, tied, or attached to any tree, pole, hydrant, planter, chair, bench, table, or other item; must be self-supporting.
- Permitted portable A-frame or freestanding signs must be internally ballasted/weighted to prevent safety hazards or accidental relocation.
- Permitted portable A-frame or freestanding signs must be placed within 10 feet of the main business entrance and not in front of a different business.
- Permitted portable A-frame or freestanding signs must be removed during forecasted high winds, snow, or ice.
- Permitted portable A-frame or freestanding signs are prohibited from having artificial illumination, three-dimensional or water-soluble materials, balloons, pennants, flags, streamers, banners, similar items, or offensive language.
- Political signs may not be illuminated.
- Political signs shall not be placed on, over, or above any public property.
Exempt Signs in Ringwood Borough
- Directional or informational signs are permitted in all zones; no directional sign shall exceed three square feet in area.
- Temporary signs are permitted in any zone provided a permit has been issued (subject to specific conditions).
- Temporary streamers, banners, or bunting may be permitted as provided in the temporary sign regulations.
Sign Plan & Submission Notes for Ringwood Borough
- Permit is required for all temporary signs regardless of zone, along with an application, fee, and (if not owner) permission of the property owner.
- Applications for temporary signs must be filed with the Construction Official.
- Permit and administrative fee are required for any political sign in excess of 10 square feet.
- All advertising signs on motels require application and permit in accordance with the State Uniform Construction Code.
Source: ecode360 municipal code